Thanks to all to help me!
Now I’m testing the possibility to use ioctl to command the PHY device. I’m studying how mii-tools works and about the possibility to reuse the Giuseppe’s patch, but I’m not an expert and I need many time!
When I’ll achieve something good, I’ll post a message.
Thank you very much for your help.
Nicola.
----- Messaggio originale -----
Da: Giuseppe Cavallaro <peppe.cavallaro@xxxxxxxxx>
A: Nicola Salvemini <nicolasalvemini@xxxxxxxx>
Cc: Glenn Henshaw <thraxisp@xxxxxxxxxxxxxxxxx>; linux-net@xxxxxxxxxxxxxxx
Inviato: Lunedì 2 giugno 2008, 19:54:58
Oggetto: Re: Power off ethernet device
Glenn Henshaw wrote:
>
> On 28-May-08, at 6:43 AM, Nicola Salvemini wrote:
>
>> Hello,
>>
>> I'm developing some
>> software on a development board based on AT91SAM9260 processor. I
>> need to power off the ethernet device, but I need a “low level”
>> command. I mean that an “ifconfig eth0 down” command is not
>> suffice to my purpose, I need a command to emulate a cable
>> disconnection, something to power off the yellow LED on the ethernet
>> port.
>>
>> I'd like to implement an "application layer" function that uses some
>> kernel functions (maybe some physical abstract layer function), but
>> I'm not very sure on how to proceed.
>
> What PHY device are you using? Many of them allow the link to be
> controlled using ioctl commands. Look at mii-tool for examples of how
> this is done,
>
If your Ethernet driver uses a PHY device driver trough the PAL
(physical abstract layer), there is no specific command to put in power
save the PHY device (no entry in proc or sys FS, no user
application).Note that, PHY Power save operation is usually performed by
setting the Reg0 bit 11. Maybe, you could use the suspend/resume
functions. There is a patch I posted some weeks ago to do that. Indeed,
I'm continuing to work on it for the stlinux but I use the Linux PM
framework to test the PHY power mode.
So you ought to hack your code, as Glenn, suggested, adding a specific
ioctl.
mii-tool is a good example to start.
___________________________________
Scopri il Blog di Yahoo! Mail: trucchi, novità, consigli... e la tua opinione!
http://www.ymailblogit.com/blog/
--
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
