Hi, I just recently acquired a new ipv6 tunnel since my two previous brokers has gone out of business. I now use hurricane electrics tunnel since i have really good ping times to it's node in Amsterdam. Anyways, i have setup a local network tunnel and enabled forwarding. After about 300 seconds, it all stops working. I have to disable and re-enable it on the firewall/router to get it working again. tcpdump shows the router/firewall doing odd things like: (i renamed my host to piv6) 00:48:14.294173 IP6 piv6 > igloo.stacken.kth.se: ICMP6, echo request, seq 321, length 64 00:48:14.341288 IP6 igloo.stacken.kth.se > piv6: ICMP6, echo reply, seq 321, length 64 00:48:14.341317 IP6 fe80::55e4:1b90 > igloo.stacken.kth.se: ICMP6, redirect, piv6 to piv6, length 160 00:48:14.341332 IP6 igloo.stacken.kth.se > piv6: ICMP6, echo reply, seq 321, length 64 --- fe80::55e4::1b90 is the local ip of the ipv6 tunnel. (note: the packet never arrives at it's destination) Any ideas of what could be going wrong? -- Ian Kumlien <pomac () vapor ! com> -- http://pomac.netswarm.net
Attachment:
signature.asc
Description: This is a digitally signed message part
