Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.24-rc2-mm1/drivers/net/slip.c linux-2.6.24-rc2-mm1/drivers/net/slip.c
--- linux.vanilla-2.6.24-rc2-mm1/drivers/net/slip.c 2007-11-16 17:55:12.000000000 +0000
+++ linux-2.6.24-rc2-mm1/drivers/net/slip.c 2007-11-16 19:28:17.000000000 +0000
@@ -11,9 +11,11 @@
* Fixes:
* Alan Cox : Sanity checks and avoid tx overruns.
* Has a new sl->mtu field.
- * Alan Cox : Found cause of overrun. ifconfig sl0 mtu upwards.
- * Driver now spots this and grows/shrinks its buffers(hack!).
- * Memory leak if you run out of memory setting up a slip driver fixed.
+ * Alan Cox : Found cause of overrun. ifconfig sl0
+ * mtu upwards. Driver now spots this
+ * and grows/shrinks its buffers(hack!).
+ * Memory leak if you run out of memory
+ * setting up a slip driver fixed.
* Matt Dillon : Printable slip (borrowed from NET2E)
* Pauline Middelink : Slip driver fixes.
* Alan Cox : Honours the old SL_COMPRESSED flag
@@ -29,7 +31,8 @@
* buffering from 4096 to 256 bytes.
* Improving SLIP response time.
* CONFIG_SLIP_MODE_SLIP6.
- * ifconfig sl? up & down now works correctly.
+ * ifconfig sl? up & down now works
+ * correctly.
* Modularization.
* Alan Cox : Oops - fix AX.25 buffer lengths
* Dmitry Gorodchanin : Even more cleanups. Preserve CSLIP
@@ -43,15 +46,18 @@
* device entries, just reg./unreg. them
* as they are needed. We kfree() them
* at module cleanup.
- * With MODULE-loading ``insmod'', user can
- * issue parameter: slip_maxdev=1024
- * (Or how much he/she wants.. Default is 256)
- * * Stanislav Voronyi : Slip line checking, with ideas taken
- * from multislip BSDI driver which was written
- * by Igor Chechik, RELCOM Corp. Only algorithms
- * have been ported to Linux SLIP driver.
+ * With MODULE-loading ``insmod'', user
+ * can issue parameter: slip_maxdev=1024
+ * (Or how much he/she wants.. Default
+ * is 256)
+ * Stanislav Voronyi : Slip line checking, with ideas taken
+ * from multislip BSDI driver which was
+ * written by Igor Chechik, RELCOM Corp.
+ * Only algorithms have been ported to
+ * Linux SLIP driver.
* Vitaly E. Lavrov : Sane behaviour on tty hangup.
- * Alexey Kuznetsov : Cleanup interfaces to tty&netdevice modules.
+ * Alexey Kuznetsov : Cleanup interfaces to tty & netdevice
+ * modules.
*/
#define SL_CHECK_TRANSMIT
@@ -99,7 +105,7 @@
#ifdef CONFIG_SLIP_SMART
static void sl_keepalive(unsigned long sls);
static void sl_outfill(unsigned long sls);
-static int sl_ioctl(struct net_device *dev,struct ifreq *rq,int cmd);
+static int sl_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
#endif
/********************************
@@ -117,15 +123,14 @@
Allocate channel buffers.
*/
-static int
-sl_alloc_bufs(struct slip *sl, int mtu)
+static int sl_alloc_bufs(struct slip *sl, int mtu)
{
int err = -ENOBUFS;
unsigned long len;
- char * rbuff = NULL;
- char * xbuff = NULL;
+ char *rbuff = NULL;
+ char *xbuff = NULL;
#ifdef SL_INCLUDE_CSLIP
- char * cbuff = NULL;
+ char *cbuff = NULL;
struct slcompress *slcomp = NULL;
#endif
@@ -195,8 +200,7 @@
}
/* Free a SLIP channel buffers. */
-static void
-sl_free_bufs(struct slip *sl)
+static void sl_free_bufs(struct slip *sl)
{
/* Free all SLIP frame buffers. */
kfree(xchg(&sl->rbuff, NULL));
@@ -248,7 +252,6 @@
}
goto done;
}
-
spin_lock_bh(&sl->lock);
err = -ENODEV;
@@ -298,23 +301,20 @@
/* Set the "sending" flag. This must be atomic hence the set_bit. */
-static inline void
-sl_lock(struct slip *sl)
+static inline void sl_lock(struct slip *sl)
{
netif_stop_queue(sl->dev);
}
/* Clear the "sending" flag. This must be atomic, hence the ASM. */
-static inline void
-sl_unlock(struct slip *sl)
+static inline void sl_unlock(struct slip *sl)
{
netif_wake_queue(sl->dev);
}
/* Send one completely decapsulated IP datagram to the IP layer. */
-static void
-sl_bump(struct slip *sl)
+static void sl_bump(struct slip *sl)
{
struct sk_buff *skb;
int count;
@@ -322,22 +322,22 @@
count = sl->rcount;
#ifdef SL_INCLUDE_CSLIP
if (sl->mode & (SL_MODE_ADAPTIVE | SL_MODE_CSLIP)) {
- unsigned char c;
- if ((c = sl->rbuff[0]) & SL_TYPE_COMPRESSED_TCP) {
+ unsigned char c = sl->rbuff[0];
+ if (c & SL_TYPE_COMPRESSED_TCP) {
/* ignore compressed packets when CSLIP is off */
if (!(sl->mode & SL_MODE_CSLIP)) {
printk(KERN_WARNING "%s: compressed packet ignored\n", sl->dev->name);
return;
}
- /* make sure we've reserved enough space for uncompress to use */
+ /* make sure we've reserved enough space for uncompress
+ to use */
if (count + 80 > sl->buffsize) {
sl->rx_over_errors++;
return;
}
count = slhc_uncompress(sl->slcomp, sl->rbuff, count);
- if (count <= 0) {
+ if (count <= 0)
return;
- }
} else if (c >= SL_TYPE_UNCOMPRESSED_TCP) {
if (!(sl->mode & SL_MODE_CSLIP)) {
/* turn on header compression */
@@ -346,33 +346,31 @@
printk(KERN_INFO "%s: header compression turned on\n", sl->dev->name);
}
sl->rbuff[0] &= 0x4f;
- if (slhc_remember(sl->slcomp, sl->rbuff, count) <= 0) {
+ if (slhc_remember(sl->slcomp, sl->rbuff, count) <= 0)
return;
- }
}
}
#endif /* SL_INCLUDE_CSLIP */
- sl->rx_bytes+=count;
+ sl->rx_bytes += count;
skb = dev_alloc_skb(count);
- if (skb == NULL) {
+ if (skb == NULL) {
printk(KERN_WARNING "%s: memory squeeze, dropping packet.\n", sl->dev->name);
sl->rx_dropped++;
return;
}
skb->dev = sl->dev;
- memcpy(skb_put(skb,count), sl->rbuff, count);
+ memcpy(skb_put(skb, count), sl->rbuff, count);
skb_reset_mac_header(skb);
- skb->protocol=htons(ETH_P_IP);
+ skb->protocol = htons(ETH_P_IP);
netif_rx(skb);
sl->dev->last_rx = jiffies;
sl->rx_packets++;
}
/* Encapsulate one IP datagram and stuff into a TTY queue. */
-static void
-sl_encaps(struct slip *sl, unsigned char *icp, int len)
+static void sl_encaps(struct slip *sl, unsigned char *icp, int len)
{
unsigned char *p;
int actual, count;
@@ -386,12 +384,11 @@
p = icp;
#ifdef SL_INCLUDE_CSLIP
- if (sl->mode & SL_MODE_CSLIP) {
+ if (sl->mode & SL_MODE_CSLIP)
len = slhc_compress(sl->slcomp, p, len, sl->cbuff, &p, 1);
- }
#endif
#ifdef CONFIG_SLIP_MODE_SLIP6
- if(sl->mode & SL_MODE_SLIP6)
+ if (sl->mode & SL_MODE_SLIP6)
count = slip_esc6(p, (unsigned char *) sl->xbuff, len);
else
#endif
@@ -425,12 +422,12 @@
static void slip_write_wakeup(struct tty_struct *tty)
{
int actual;
- struct slip *sl = (struct slip *) tty->disc_data;
+ struct slip *sl = tty->disc_data;
/* First make sure we're connected. */
- if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev)) {
+ if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev))
return;
- }
+
if (sl->xleft <= 0) {
/* Now serial buffer is almost free & we can start
* transmission of another packet */
@@ -463,15 +460,15 @@
/* 20 sec timeout not reached */
goto out;
}
- printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
- (sl->tty->driver->chars_in_buffer(sl->tty) || sl->xleft) ?
- "bad line quality" : "driver error");
+ printk(KERN_WARNING "%s: transmit timed out, %s?\n",
+ dev->name,
+ (sl->tty->driver->chars_in_buffer(sl->tty) || sl->xleft) ?
+ "bad line quality" : "driver error");
sl->xleft = 0;
sl->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
sl_unlock(sl);
#endif
}
-
out:
spin_unlock(&sl->lock);
}
@@ -484,7 +481,7 @@
struct slip *sl = netdev_priv(dev);
spin_lock(&sl->lock);
- if (!netif_running(dev)) {
+ if (!netif_running(dev)) {
spin_unlock(&sl->lock);
printk(KERN_WARNING "%s: xmit call when iface is down\n", dev->name);
dev_kfree_skb(skb);
@@ -497,7 +494,7 @@
}
sl_lock(sl);
- sl->tx_bytes+=skb->len;
+ sl->tx_bytes += skb->len;
sl_encaps(sl, skb->data, skb->len);
spin_unlock(&sl->lock);
@@ -536,7 +533,7 @@
{
struct slip *sl = netdev_priv(dev);
- if (sl->tty==NULL)
+ if (sl->tty == NULL)
return -ENODEV;
sl->flags &= (1 << SLF_INUSE);
@@ -657,20 +654,19 @@
* in parallel
*/
-static void slip_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count)
+static void slip_receive_buf(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
{
- struct slip *sl = (struct slip *) tty->disc_data;
+ struct slip *sl = tty->disc_data;
- if (!sl || sl->magic != SLIP_MAGIC ||
- !netif_running(sl->dev))
+ if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev))
return;
/* Read the characters out of the buffer */
while (count--) {
if (fp && *fp++) {
- if (!test_and_set_bit(SLF_ERROR, &sl->flags)) {
+ if (!test_and_set_bit(SLF_ERROR, &sl->flags))
sl->rx_errors++;
- }
cp++;
continue;
}
@@ -688,7 +684,6 @@
************************************/
/* Collect hanged up channels */
-
static void sl_sync(void)
{
int i;
@@ -696,21 +691,21 @@
struct slip *sl;
for (i = 0; i < slip_maxdev; i++) {
- if ((dev = slip_devs[i]) == NULL)
+ dev = slip_devs[i];
+ if (dev == NULL)
break;
sl = netdev_priv(dev);
if (sl->tty || sl->leased)
continue;
- if (dev->flags&IFF_UP)
+ if (dev->flags & IFF_UP)
dev_close(dev);
}
}
/* Find a free SLIP channel, and link in this `tty' line. */
-static struct slip *
-sl_alloc(dev_t line)
+static struct slip *sl_alloc(dev_t line)
{
int i;
int sel = -1;
@@ -805,15 +800,15 @@
spin_lock_init(&sl->lock);
sl->mode = SL_MODE_DEFAULT;
#ifdef CONFIG_SLIP_SMART
- init_timer(&sl->keepalive_timer); /* initialize timer_list struct */
- sl->keepalive_timer.data=(unsigned long)sl;
- sl->keepalive_timer.function=sl_keepalive;
+ /* initialize timer_list struct */
+ init_timer(&sl->keepalive_timer);
+ sl->keepalive_timer.data = (unsigned long)sl;
+ sl->keepalive_timer.function = sl_keepalive;
init_timer(&sl->outfill_timer);
- sl->outfill_timer.data=(unsigned long)sl;
- sl->outfill_timer.function=sl_outfill;
+ sl->outfill_timer.data = (unsigned long)sl;
+ sl->outfill_timer.function = sl_outfill;
#endif
slip_devs[i] = dev;
-
return sl;
}
@@ -832,7 +827,7 @@
struct slip *sl;
int err;
- if(!capable(CAP_NET_ADMIN))
+ if (!capable(CAP_NET_ADMIN))
return -EPERM;
/* RTnetlink lock is misused here to serialize concurrent
@@ -844,7 +839,7 @@
/* Collect hanged up channels. */
sl_sync();
- sl = (struct slip *) tty->disc_data;
+ sl = tty->disc_data;
err = -EEXIST;
/* First make sure we're not already connected. */
@@ -853,7 +848,8 @@
/* OK. Find a free SLIP channel to use. */
err = -ENFILE;
- if ((sl = sl_alloc(tty_devnum(tty))) == NULL)
+ sl = sl_alloc(tty_devnum(tty));
+ if (sl == NULL)
goto err_exit;
sl->tty = tty;
@@ -863,23 +859,25 @@
if (!test_bit(SLF_INUSE, &sl->flags)) {
/* Perform the low-level SLIP initialization. */
- if ((err = sl_alloc_bufs(sl, SL_MTU)) != 0)
+ err = sl_alloc_bufs(sl, SL_MTU);
+ if (err)
goto err_free_chan;
set_bit(SLF_INUSE, &sl->flags);
- if ((err = register_netdevice(sl->dev)))
+ err = register_netdevice(sl->dev);
+ if (err)
goto err_free_bufs;
}
#ifdef CONFIG_SLIP_SMART
if (sl->keepalive) {
- sl->keepalive_timer.expires=jiffies+sl->keepalive*HZ;
- add_timer (&sl->keepalive_timer);
+ sl->keepalive_timer.expires = jiffies + sl->keepalive * HZ;
+ add_timer(&sl->keepalive_timer);
}
if (sl->outfill) {
- sl->outfill_timer.expires=jiffies+sl->outfill*HZ;
- add_timer (&sl->outfill_timer);
+ sl->outfill_timer.expires = jiffies + sl->outfill * HZ;
+ add_timer(&sl->outfill_timer);
}
#endif
@@ -928,10 +926,9 @@
* This means flushing out any pending queues, and then returning. This
* call is serialized against other ldisc functions.
*/
-static void
-slip_close(struct tty_struct *tty)
+static void slip_close(struct tty_struct *tty)
{
- struct slip *sl = (struct slip *) tty->disc_data;
+ struct slip *sl = tty->disc_data;
/* First make sure we're connected. */
if (!sl || sl->magic != SLIP_MAGIC || sl->tty != tty)
@@ -955,8 +952,7 @@
* STANDARD SLIP ENCAPSULATION *
************************************************************************/
-static int
-slip_esc(unsigned char *s, unsigned char *d, int len)
+static int slip_esc(unsigned char *s, unsigned char *d, int len)
{
unsigned char *ptr = d;
unsigned char c;
@@ -975,16 +971,16 @@
*/
while (len-- > 0) {
- switch(c = *s++) {
- case END:
+ switch (c = *s++) {
+ case END:
*ptr++ = ESC;
*ptr++ = ESC_END;
break;
- case ESC:
+ case ESC:
*ptr++ = ESC;
*ptr++ = ESC_ESC;
break;
- default:
+ default:
*ptr++ = c;
break;
}
@@ -996,33 +992,31 @@
static void slip_unesc(struct slip *sl, unsigned char s)
{
- switch(s) {
- case END:
+ switch (s) {
+ case END:
#ifdef CONFIG_SLIP_SMART
/* drop keeptest bit = VSV */
if (test_bit(SLF_KEEPTEST, &sl->flags))
clear_bit(SLF_KEEPTEST, &sl->flags);
#endif
- if (!test_and_clear_bit(SLF_ERROR, &sl->flags) && (sl->rcount > 2)) {
+ if (!test_and_clear_bit(SLF_ERROR, &sl->flags)
+ && (sl->rcount > 2))
sl_bump(sl);
- }
clear_bit(SLF_ESCAPE, &sl->flags);
sl->rcount = 0;
return;
- case ESC:
+ case ESC:
set_bit(SLF_ESCAPE, &sl->flags);
return;
- case ESC_ESC:
- if (test_and_clear_bit(SLF_ESCAPE, &sl->flags)) {
+ case ESC_ESC:
+ if (test_and_clear_bit(SLF_ESCAPE, &sl->flags))
s = ESC;
- }
break;
- case ESC_END:
- if (test_and_clear_bit(SLF_ESCAPE, &sl->flags)) {
+ case ESC_END:
+ if (test_and_clear_bit(SLF_ESCAPE, &sl->flags))
s = END;
- }
break;
}
if (!test_bit(SLF_ERROR, &sl->flags)) {
@@ -1041,8 +1035,7 @@
* 6 BIT SLIP ENCAPSULATION *
************************************************************************/
-int
-slip_esc6(unsigned char *s, unsigned char *d, int len)
+static int slip_esc6(unsigned char *s, unsigned char *d, int len)
{
unsigned char *ptr = d;
unsigned char c;
@@ -1079,8 +1072,7 @@
return ptr - d;
}
-void
-slip_unesc6(struct slip *sl, unsigned char s)
+static void slip_unesc6(struct slip *sl, unsigned char s)
{
unsigned char c;
@@ -1091,13 +1083,13 @@
clear_bit(SLF_KEEPTEST, &sl->flags);
#endif
- if (!test_and_clear_bit(SLF_ERROR, &sl->flags) && (sl->rcount > 2)) {
+ if (!test_and_clear_bit(SLF_ERROR, &sl->flags)
+ && (sl->rcount > 2))
sl_bump(sl);
- }
sl->rcount = 0;
sl->xbits = 0;
sl->xdata = 0;
- } else if (s >= 0x30 && s < 0x70) {
+ } else if (s >= 0x30 && s < 0x70) {
sl->xdata = (sl->xdata << 6) | ((s - 0x30) & 0x3F);
sl->xbits += 6;
if (sl->xbits >= 8) {
@@ -1112,24 +1104,24 @@
set_bit(SLF_ERROR, &sl->flags);
}
}
- }
+ }
}
#endif /* CONFIG_SLIP_MODE_SLIP6 */
/* Perform I/O control on an active SLIP channel. */
-static int slip_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
+static int slip_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
- struct slip *sl = (struct slip *) tty->disc_data;
+ struct slip *sl = tty->disc_data;
unsigned int tmp;
int __user *p = (int __user *)arg;
/* First make sure we're connected. */
- if (!sl || sl->magic != SLIP_MAGIC) {
+ if (!sl || sl->magic != SLIP_MAGIC)
return -EINVAL;
- }
- switch(cmd) {
- case SIOCGIFNAME:
+ switch (cmd) {
+ case SIOCGIFNAME:
tmp = strlen(sl->dev->name) + 1;
if (copy_to_user((void __user *)arg, sl->dev->name, tmp))
return -EFAULT;
@@ -1144,34 +1136,31 @@
if (get_user(tmp, p))
return -EFAULT;
#ifndef SL_INCLUDE_CSLIP
- if (tmp & (SL_MODE_CSLIP|SL_MODE_ADAPTIVE)) {
+ if (tmp & (SL_MODE_CSLIP|SL_MODE_ADAPTIVE))
return -EINVAL;
- }
#else
if ((tmp & (SL_MODE_ADAPTIVE | SL_MODE_CSLIP)) ==
- (SL_MODE_ADAPTIVE | SL_MODE_CSLIP)) {
+ (SL_MODE_ADAPTIVE | SL_MODE_CSLIP))
/* return -EINVAL; */
tmp &= ~SL_MODE_ADAPTIVE;
- }
#endif
#ifndef CONFIG_SLIP_MODE_SLIP6
- if (tmp & SL_MODE_SLIP6) {
+ if (tmp & SL_MODE_SLIP6)
return -EINVAL;
- }
#endif
sl->mode = tmp;
- sl->dev->type = ARPHRD_SLIP+sl->mode;
+ sl->dev->type = ARPHRD_SLIP + sl->mode;
return 0;
- case SIOCSIFHWADDR:
+ case SIOCSIFHWADDR:
return -EINVAL;
#ifdef CONFIG_SLIP_SMART
/* VSV changes start here */
- case SIOCSKEEPALIVE:
+ case SIOCSKEEPALIVE:
if (get_user(tmp, p))
return -EFAULT;
- if (tmp > 255) /* max for unchar */
+ if (tmp > 255) /* max for unchar */
return -EINVAL;
spin_lock_bh(&sl->lock);
@@ -1179,40 +1168,42 @@
spin_unlock_bh(&sl->lock);
return -ENODEV;
}
- if ((sl->keepalive = (unchar) tmp) != 0) {
- mod_timer(&sl->keepalive_timer, jiffies+sl->keepalive*HZ);
+ sl->keepalive = (u8)tmp;
+ if (sl->keepalive != 0) {
+ mod_timer(&sl->keepalive_timer,
+ jiffies + sl->keepalive * HZ);
set_bit(SLF_KEEPTEST, &sl->flags);
- } else {
- del_timer (&sl->keepalive_timer);
- }
+ } else
+ del_timer(&sl->keepalive_timer);
spin_unlock_bh(&sl->lock);
return 0;
- case SIOCGKEEPALIVE:
+ case SIOCGKEEPALIVE:
if (put_user(sl->keepalive, p))
return -EFAULT;
return 0;
- case SIOCSOUTFILL:
+ case SIOCSOUTFILL:
if (get_user(tmp, p))
return -EFAULT;
- if (tmp > 255) /* max for unchar */
+ if (tmp > 255) /* max for unchar */
return -EINVAL;
spin_lock_bh(&sl->lock);
if (!sl->tty) {
spin_unlock_bh(&sl->lock);
return -ENODEV;
}
- if ((sl->outfill = (unchar) tmp) != 0){
- mod_timer(&sl->outfill_timer, jiffies+sl->outfill*HZ);
+ sl->outfill = (u8)tmp;
+ if (sl->outfill != 0) {
+ mod_timer(&sl->outfill_timer,
+ jiffies + sl->outfill * HZ);
set_bit(SLF_OUTWAIT, &sl->flags);
- } else {
- del_timer (&sl->outfill_timer);
- }
+ } else
+ del_timer(&sl->outfill_timer);
spin_unlock_bh(&sl->lock);
- return 0;
+ return 0;
- case SIOCGOUTFILL:
+ case SIOCGOUTFILL:
if (put_user(sl->outfill, p))
return -EFAULT;
return 0;
@@ -1229,7 +1220,7 @@
to allow get/set outfill/keepalive parameter
by ifconfig */
-static int sl_ioctl(struct net_device *dev,struct ifreq *rq,int cmd)
+static int sl_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct slip *sl = netdev_priv(dev);
unsigned long *p = (unsigned long *)&rq->ifr_ifru;
@@ -1244,58 +1235,61 @@
return -ENODEV;
}
- switch(cmd){
- case SIOCSKEEPALIVE:
+ switch (cmd) {
+ case SIOCSKEEPALIVE:
/* max for unchar */
- if ((unsigned)*p > 255) {
+ if ((unsigned)*p > 255) {
spin_unlock_bh(&sl->lock);
return -EINVAL;
}
- sl->keepalive = (unchar) *p;
+ sl->keepalive = (u8)*p;
if (sl->keepalive != 0) {
- sl->keepalive_timer.expires=jiffies+sl->keepalive*HZ;
- mod_timer(&sl->keepalive_timer, jiffies+sl->keepalive*HZ);
+ sl->keepalive_timer.expires =
+ jiffies + sl->keepalive * HZ;
+ mod_timer(&sl->keepalive_timer,
+ jiffies + sl->keepalive * HZ);
set_bit(SLF_KEEPTEST, &sl->flags);
- } else {
- del_timer(&sl->keepalive_timer);
- }
+ } else
+ del_timer(&sl->keepalive_timer);
break;
- case SIOCGKEEPALIVE:
+ case SIOCGKEEPALIVE:
*p = sl->keepalive;
break;
- case SIOCSOUTFILL:
- if ((unsigned)*p > 255) { /* max for unchar */
+ case SIOCSOUTFILL:
+ if ((unsigned)*p > 255) { /* max for unchar */
spin_unlock_bh(&sl->lock);
return -EINVAL;
}
- if ((sl->outfill = (unchar)*p) != 0){
- mod_timer(&sl->outfill_timer, jiffies+sl->outfill*HZ);
+ sl->outfill = (u8)*p;
+ if (sl->outfill != 0) {
+ mod_timer(&sl->outfill_timer,
+ jiffies + sl->outfill * HZ);
set_bit(SLF_OUTWAIT, &sl->flags);
- } else {
- del_timer (&sl->outfill_timer);
- }
- break;
+ } else
+ del_timer(&sl->outfill_timer);
+ break;
- case SIOCGOUTFILL:
+ case SIOCGOUTFILL:
*p = sl->outfill;
break;
- case SIOCSLEASE:
+ case SIOCSLEASE:
/* Resolve race condition, when ioctl'ing hanged up
and opened by another process device.
*/
- if (sl->tty != current->signal->tty && sl->pid != current->pid) {
+ if (sl->tty != current->signal->tty &&
+ sl->pid != current->pid) {
spin_unlock_bh(&sl->lock);
return -EPERM;
}
sl->leased = 0;
- if (*p)
+ if (*p)
sl->leased = 1;
- break;
+ break;
- case SIOCGLEASE:
+ case SIOCGLEASE:
*p = sl->leased;
};
spin_unlock_bh(&sl->lock);
@@ -1327,7 +1321,7 @@
" (6 bit encapsulation enabled)"
#endif
".\n",
- SLIP_VERSION, slip_maxdev );
+ SLIP_VERSION, slip_maxdev);
#if defined(SL_INCLUDE_CSLIP)
printk(KERN_INFO "CSLIP: code copyright 1989 Regents of the University of California.\n");
#endif
@@ -1335,14 +1329,16 @@
printk(KERN_INFO "SLIP linefill/keepalive option.\n");
#endif
- slip_devs = kzalloc(sizeof(struct net_device *)*slip_maxdev, GFP_KERNEL);
+ slip_devs = kzalloc(sizeof(struct net_device *)*slip_maxdev,
+ GFP_KERNEL);
if (!slip_devs) {
- printk(KERN_ERR "SLIP: Can't allocate slip devices array! Uaargh! (-> No SLIP available)\n");
+ printk(KERN_ERR "SLIP: Can't allocate slip devices array.\n");
return -ENOMEM;
}
/* Fill in our line protocol discipline, and register it */
- if ((status = tty_register_ldisc(N_SLIP, &sl_ldisc)) != 0) {
+ status = tty_register_ldisc(N_SLIP, &sl_ldisc);
+ if (status != 0) {
printk(KERN_ERR "SLIP: can't register line discipline (err = %d)\n", status);
kfree(slip_devs);
}
@@ -1402,10 +1398,9 @@
kfree(slip_devs);
slip_devs = NULL;
- if ((i = tty_unregister_ldisc(N_SLIP)))
- {
+ i = tty_unregister_ldisc(N_SLIP);
+ if (i != 0)
printk(KERN_ERR "SLIP: can't unregister line discipline (err = %d)\n", i);
- }
}
module_init(slip_init);
@@ -1419,17 +1414,15 @@
static void sl_outfill(unsigned long sls)
{
- struct slip *sl=(struct slip *)sls;
+ struct slip *sl = (struct slip *)sls;
spin_lock(&sl->lock);
if (sl->tty == NULL)
goto out;
- if(sl->outfill)
- {
- if( test_bit(SLF_OUTWAIT, &sl->flags) )
- {
+ if (sl->outfill) {
+ if (test_bit(SLF_OUTWAIT, &sl->flags)) {
/* no packets were transmitted, do outfill */
#ifdef CONFIG_SLIP_MODE_SLIP6
unsigned char s = (sl->mode & SL_MODE_SLIP6)?0x70:END;
@@ -1437,13 +1430,11 @@
unsigned char s = END;
#endif
/* put END into tty queue. Is it right ??? */
- if (!netif_queue_stopped(sl->dev))
- {
+ if (!netif_queue_stopped(sl->dev)) {
/* if device busy no outfill */
sl->tty->driver->write(sl->tty, &s, 1);
}
- }
- else
+ } else
set_bit(SLF_OUTWAIT, &sl->flags);
mod_timer(&sl->outfill_timer, jiffies+sl->outfill*HZ);
@@ -1454,31 +1445,29 @@
static void sl_keepalive(unsigned long sls)
{
- struct slip *sl=(struct slip *)sls;
+ struct slip *sl = (struct slip *)sls;
spin_lock(&sl->lock);
if (sl->tty == NULL)
goto out;
- if( sl->keepalive)
- {
- if(test_bit(SLF_KEEPTEST, &sl->flags))
- {
+ if (sl->keepalive) {
+ if (test_bit(SLF_KEEPTEST, &sl->flags)) {
/* keepalive still high :(, we must hangup */
- if( sl->outfill ) /* outfill timer must be deleted too */
+ if (sl->outfill)
+ /* outfill timer must be deleted too */
(void)del_timer(&sl->outfill_timer);
printk(KERN_DEBUG "%s: no packets received during keepalive timeout, hangup.\n", sl->dev->name);
- tty_hangup(sl->tty); /* this must hangup tty & close slip */
+ /* this must hangup tty & close slip */
+ tty_hangup(sl->tty);
/* I think we need not something else */
goto out;
- }
- else
+ } else
set_bit(SLF_KEEPTEST, &sl->flags);
mod_timer(&sl->keepalive_timer, jiffies+sl->keepalive*HZ);
}
-
out:
spin_unlock(&sl->lock);
}
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
