On Tuesday 17 October 2006 15:50, John Philips wrote: > Hi, > > I recently upgraded some router/NAT devices from 2.4.25 to 2.6.17.8. > They're using VIA C3 processors and NatSemi DP83815 NICs. > > Right after the upgrade I started noticing these error messages on one of > the heavier-loaded boxes. This particular box routes and does NAT for > around 400 users, peaking at 6Mb/sec of throughput. > > The errors were happening about every 3-5 minutes. I statically set eth6 > to 100baseTX-FD with mii-tool, and now the errors appear every few hours > for 10-20 minute stretches. > > I searched Google and couldn't find any insight (FYI, I'm NOT using the > CIPE patches). > > Any ideas? Could you send us, once your machine is handling its typical load : lspci -v ethtool -S eth6 tc -s -d qdisc cat /proc/slabinfo cat /proc/meminfo - To unsubscribe from this list: send the line "unsubscribe linux-net" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
