[PATCH] NEx000: fix RTL8019AS base address for RBTX4938

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Correct the base address of the Realtek RTL8019AS chip on the Toshiba RBTX4938
board -- this should make the driver work at least when CONFIG_PCI is enabled.

Signed-off-by: Yuri Shpilevsky <yshpilevsky@xxxxxxxxxxxxx>
Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>

diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 08b218c..93c494b 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -226,7 +226,7 @@ struct net_device * __init ne_probe(int 
 	netdev_boot_setup_check(dev);
 
 #ifdef CONFIG_TOSHIBA_RBTX4938
-	dev->base_addr = 0x07f20280;
+	dev->base_addr = RBTX4938_RTL_8019_BASE;
 	dev->irq = RBTX4938_RTL_8019_IRQ;
 #endif
 	err = do_ne_probe(dev);



[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux