>> I tried 1.3/1.4 of the skge driver and got this, still crashes after some >> minutes of load with corrupt TCP sessions in before. >What is your configuration (hardware), and what protocols (VLAN?, PPP?, ...) Dual P3 550Mhz, Intel N440BX board, 512MB RAM 0000:00:0b.0 Ethernet controller: D-Link System Inc Gigabit Ethernet Adapter (rev 11) 0000:00:0d.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 37) 0000:00:0d.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 37) 0000:00:0e.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01) 0000:00:0f.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 05) 0000:00:12.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:12.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:12.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:12.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:00:14.0 VGA compatible controller: Cirrus Logic GD 5480 (rev 23) We use plain TCP/IP mainly with SMB (Samba), no VLAN, no PPP. Switch is D-Link DGS-1024D with 24x1000/100/10 ports. - : send the line "unsubscribe linux-net" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
