In 2.6.11 ethtool data should be available. Please let me know if you are using 2.6.11 and ethtool does not work with your card. I have no Tornado card to test but with 3c905/3c905B cards and options=0x204 configured, mii-diag reports: Auto-negotiation disabled, with Speed fixed at 100 mbps, full-duplex. I suppose you talking about 3c905C Tornado cards (3c900 cards are not of Tornado type). Steffen On Fri, Mar 18, 2005 at 11:34:19AM +0100, Matthias Andree wrote: > Hi, > > I've recently upgraded a router which has three 3Com900C Tornado cards > revisions 74 and 78 from Linux 2.4 to 2.6. > > IIRC, Linux 2.4 allowed to report if the link beat was sensed to be 10 > or 100 mbps, Linux 2.6 does not. One of these cards is attached to > peculiar network gear and needs to be forced to 100baseTx-FD. > I configured options=0x204 for that interface, which sorta worked; > vortex-diag and mii-diag still report autonegotiation were enabled. > Strange. > > ethtool (I tried v2 and v3) does not appear to work at all for 3C900C > cards, "No data available" if run without options. > > Any insight into these would be appreciated, > > -- > Matthias Andree > - > : send the line "unsubscribe linux-net" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html - : send the line "unsubscribe linux-net" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
