Re: IPSec - Strange routing problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tom Eastep wrote:
Joshua Schmidlkofer wrote:

I am setting up an IPSec tunnel (ESP) between two networks.  I can ping
the private side of the routers, from the routers, however, I can't get
anything else through.  It's very strange.  tcpdump shows traffic going
in the correct direction, but nothing get's out the internal network.



## [Begin local tunnel: 10.1.1.0/24 ] ############
spdadd 2.2.2.2         10.1.1.0/24  any -P in  ipsec
   esp/tunnel/2.2.2.2-5.5.5.5/require;
spdadd 10.1.1.0/24          2.2.2.2 any -P out ipsec
   esp/tunnel/5.5.5.5-2.2.2.2/require;
## [End                              ] ############


If you are running the 2.6.10 kernel, then you need ipsec-tools 0.5 and
you need a -P fwd rule. See http://www.ipsec-howto.org/x277.html.

-Tom


Now that I am over my fan-boy moment, what is the recommended practice?


thanks,

 joshua
-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux