Hallo,
my name is Erik Adler, from Germany.
I have a Alpha Server System "Takara" from Flexor.
>From SRM:
___________________________________________________________________________
FORCE Computers FLEXOR A164/500
DIGITAL 21164 PICMG SBC 5/500
Firmware
SRM Console: V5.7-3
PALcode: OpenVMS PALcode V1.21-7, Digital UNIX PALcode V1.23-9
System SROM: V1.1
Prozessor and Core Logic
DECchip (tm) 21164A (rev 2) 500Mhz
DECchip (tm) 21172 CIA ASIC
Memory
512 Mb of System memory
2 Mb of bcache
96 kb of scache
Interrupt Accelerator Support
primary PCI bus
2 accelerated backplane PCI busses
___________________________________________________________________________
Peripherie Chips:
PCI to ISA - Intel SIO 82378
PCI Bridge Bus 0 to 1 - DECchip 21052-AA
PCI Bridge Bus 0 to 2 - DECchip 21052-AA
Network - Intel EtherExpress (old: DECchip 21041)
SCSI - Symbios 810
___________________________________________________________________________
The Kernel above 2.4 works fine (2.2.22 on Debian; 2.2.17 on Red Hat).
The Kernel 2.4.27 works, without my SCSI-Controller (NCR53c810), i have no
HDD or CDROM.
The old ncr53c8xx Driver have a timeout, the new (Sym 2.0) have a loop with
timeout. The Kernel 2.2.x have IRQ 44 for SCSI and works, the Kernel 2.4.x
says IRQ 45 and a INTA Problem and makes trouble.
Erik Adler
--
+++ GMX DSL Premiumtarife 3 Monate gratis* + WLAN-Router 0,- EUR* +++
Clevere DSL-Nutzer wechseln jetzt zu GMX: http://www.gmx.net/de/go/dsl
-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
