PROBLEM: 3c59x, Too much work in interrupt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Receiving following in syslogs:

	eth0: Too much work in interrupt, status e401.

Kernel is 2.6.5
---------------------------------------------------------------------------
eth0 is:

02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
(rev 78)
        Subsystem: Dell Computer Corporation: Unknown device 010d
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (2500ns min, 2500ns max), cache line size 10
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at dc00 [size=128]
        Region 1: Memory at ff6ff800 (32-bit, non-prefetchable)
[size=128]
        Expansion ROM at ff700000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-
---------------------------------------------------------------
Modules loaded are:

Module                  Size  Used by
r128                   91164  0
snd_pcm_oss            48132  0
snd_mixer_oss          17280  2 snd_pcm_oss
snd_intel8x0           29764  1
snd_ac97_codec         61188  1 snd_intel8x0
snd_pcm                84864  2 snd_pcm_oss,snd_intel8x0
snd_timer              21888  1 snd_pcm
snd_page_alloc          8964  2 snd_intel8x0,snd_pcm
snd_mpu401_uart         6400  1 snd_intel8x0
snd_rawmidi            20608  1 snd_mpu401_uart
snd_seq_device          6788  1 snd_rawmidi
snd                    46084  9
snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_                                        codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
ipt_state               1664  1
ip_conntrack           28832  1 ipt_state
ipt_mac                 1792  16
iptable_filter          2304  1
ip_tables              16656  3 ipt_state,ipt_mac,iptable_filter
uhci_hcd               29704  0
ohci_hcd               17024  0
ehci_hcd               24064  0
via_rhine              18696  0
mii                     4352  1 via_rhine
crc32                   4096  1 via_rhine
3c59x                  35752  0
ide_scsi               14084  0
rtc                    10792  0
---------------------------------
CPU is:

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Pentium(R) 4 CPU 2.00GHz
stepping        : 4
cpu MHz         : 1994.007
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips        : 3948.54


Best regards,
-mike
-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux