On Thursday 04 March 2004 20:16, Jeff Garzik wrote: > Stephen Hemminger wrote: > > One way that should work in 2.6 would be to build the driver > > in (not a module) and pass the addresses on the boot param > > line. > > netdev=3,0x300,eth0 netdev=5,0x200,eth1 > > > > or insert module manually > > modprobe ne io=0x300,0x200 irq=3,5 > > > > Not sure how to get same effect with modprobe.conf > > If the latter command works on the command line, then you can > pass those options in through 2.4's modules.conf... I would > _hope_ that modprobe.conf allows similar option passing, > otherwise it's broken... > > Jeff I'll try both the boot param and the modprobe with both 2.4.25 and 2.6.3/2.6.4-rc1 this weekend. My itty bitty firewall is not the fastest machine I have. I'll report back Mon. Thank you both for the suggestions. :-) -- Free Speech is better than Free Beer - : send the line "unsubscribe linux-net" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
