I keep getting tons of this messages with 2.4.23-rc2 and e100 driver:
hw tcp v4 csum failed hw tcp v4 csum failed ....
Is it a hardware problem or e100 problem ?
The problem goes away if driver is loaded with XsumRX=0. And by the way, disabling rx checksums by running
ethtool -K eth0 rx off
doesn't help.
The hardware is Asus MB with Pentum 4 2.4GHz
00:00.0 Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02) 00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02) 00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02) 00:1d.3 USB Controller: Intel Corp. 82801EB USB (rev 02) 00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2) 00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02) 00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio Controller (rev 02) 01:08.0 Ethernet controller: Intel Corp.: Unknown device 1050 (rev 02)
Thanks.
Felix.
- : send the line "unsubscribe linux-net" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
