RE: Public MAC address range

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I knew I had seen 00-00-5E used somewhere.  This is from RFC 2338
(http://www.faqs.org/rfcs/rfc2338.html).

	7.3 Virtual Router MAC Address
	
	   The virtual router MAC address associated with a virtual router
is an
	   IEEE 802 MAC Address in the following format:
	
	      00-00-5E-00-01-{VRID} (in hex in internet standard bit-order)

I suppose you could use these addresses if your network doesn't use VRRP,
but to me it seems like throwing rocks at a beehive.

> -----Original Message-----
> From: rich+ml@lclogic.com [mailto:rich+ml@lclogic.com] 
> Sent: Monday, August 04, 2003 9:55 PM
> To: Eble, Dan
> Cc: sandy pond; linux-net@vger.kernel.org
> Subject: RE: Public MAC address range
> 
> 
> I have it on good authority that IANA reserved this block for 
> private use
> (in the same way that IANA reserved IP 192.168.X.X for 
> private use), but
> can't find documentation.
> 
> Anyway if you accidently reproduce mac address on your subnet 
> go to Las
> Vegas immediately. :)
> 
> On Mon, 4 Aug 2003, Eble, Dan wrote:
> 
> > Date: Mon, 4 Aug 2003 12:28:19 -0400 
> > From: "Eble, Dan" <DanE@aiinet.com>
> > To: "'rich+ml@lclogic.com'" <rich+ml@lclogic.com>,
> >      sandy pond <sandy_pond@myrealbox.com>
> > Cc: linux-net@vger.kernel.org
> > Subject: RE: Public MAC address range
> > 
> > OUI 00005E is assigned to the IANA.  Have they given 
> permission to assign
> > these addresses locally?
> > 
> > > -----Original Message-----
> > > From: rich+ml@lclogic.com [mailto:rich+ml@lclogic.com] 
> > > Sent: Monday, August 04, 2003 12:11 PM
> > > To: sandy pond
> > > Cc: linux-net@vger.kernel.org
> > > Subject: Re: Public MAC address range
> > > 
> > > 
> > > 00005E 
> > > 
> > > On Sun, 3 Aug 2003, sandy pond 
> > > wrote:
> > > 
> > > > Date: Sun, 03 Aug 2003 11:03:59 -0600
> > > > From: sandy pond <sandy_pond@myrealbox.com>
> > > > To: linux-net@vger.kernel.org
> > > > Subject: Public MAC address range
> > > > 
> > > > I'm developing a custom protocol using some raw Ethernet 
> > > devices and Linux.
> > > > 
> > > > I am aware of public IP ranges (e.g. 198.168.0.0/24).
> > > > 
> > > > Is there similar ranges for MAC addresses?  I've 
> googled and I can't
> > > > find any info.  The first three octets are supposed to be 
> > > assigned by
> > > > manufacturer.  Is there some general practice for assigning MAC
> > > > addresses when you don't have manufacturer codes?
> > > > 
> > > > 
> > > > -
> > > > : send the line "unsubscribe 
> > > linux-net" in
> > > > the body of a message to majordomo@vger.kernel.org
> > > > More majordomo info at  
> http://vger.kernel.org/majordomo-info.html
> > > > 
> > > 
> > > -
> 
> > > : send the line "unsubscribe 
> > > linux-net" in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > > 
> > 
> 
-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux