Hi, Just tried out the e100 driver which comes with 2.5.73, i.e. not the new one from sourceforge, with the following result. The machine is a dual Xeon box. Regards, -Udo. Intel(R) PRO/100 Network Driver - version 2.3.13-k1 Copyright (c) 2003 Intel Corporation e100: selftest OK. irq 9: nobody cared! Call Trace: [<c010b314>] __report_bad_irq+0x2a/0x8b [<c010b3fe>] note_interrupt+0x6f/0x9f [<c010b715>] do_IRQ+0x161/0x192 [<c0109aa4>] common_interrupt+0x18/0x20 [<c0258eb3>] e100_mdi_read+0x50/0xdb [<c0259759>] e100_auto_neg+0xeb/0x112 [<c0258e38>] e100_mdi_write+0xb0/0xdb [<c02597b8>] e100_phy_set_speed_duplex+0x38/0xa7 [<c03e7dd3>] e100_phy_init+0x71/0x80 [<c0253f0f>] e100_hw_init+0x13/0x10b [<c03e73c8>] e100_rd_pwa_no+0x31/0x3f [<c03e7127>] e100_init+0xee/0x118 [<c03e6a47>] e100_found1+0x226/0x3f9 [<c02038c0>] pci_device_probe_static+0x52/0x63 [<c0203a46>] __pci_device_probe+0x3b/0x4d [<c0203a87>] pci_device_probe+0x2f/0x4d [<c024251c>] bus_match+0x45/0x73 [<c0242615>] driver_attach+0x59/0x5d [<c0242896>] bus_add_driver+0x94/0xa7 [<c0203d59>] pci_register_driver+0x80/0xa8 [<c03e6c31>] e100_init_module+0x17/0x57 [<c03d085c>] do_initcalls+0x27/0x92 [<c012f268>] init_workqueues+0xf/0x26 [<c01050c9>] init+0x5b/0x1f6 [<c010506e>] init+0x0/0x1f6 [<c0107029>] kernel_thread_helper+0x5/0xb handlers: [<c0205f63>] (acpi_irq+0x0/0x16) Disabling IRQ #9 e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled
Attachment:
pgp00059.pgp
Description: PGP signature
