Hi, folks I'm using E1000 driver version 4.3.15 with kernel 2.2.19 to work with dual port Gigabit adapter on the following platform: http://www.forcecomputers.com/products/viewDetail.cfm?productTypeID=2&productID=178 The Gigabit adapter is plugged into PCI-X slot. Our system is working as a 2-port ethernet bridge, with Intel Giga ports acting as bridge ports. After several hours of stress testing which involves passing ~ 250 Mbit/sec traffic through the bridge, receiver on one of Giga ports is stuck. All packets coming to this port are dropped. See the attached file for more information. Even when we stop the test, the receiver remains to be stuck, we cannot] pass a simple ping through the bridge. What can possibly be the problem ? Thanks in advance. Felix.
Description Intel(R) PRO/1000 Network Connection Part_Number a92111-004 Driver_Name e1000 Driver_Version 4.3.15 PCI_Vendor 0x8086 PCI_Device_ID 0x1010 PCI_Subsystem_Vendor 0x8086 PCI_Subsystem_ID 0x1011 PCI_Revision_ID 0x01 PCI_Bus 1 PCI_Slot 3 PCI_Bus_Type PCI-X PCI_Bus_Speed 100MHz PCI_Bus_Width 64-bit IRQ 11 System_Device_Name eth0 Current_HWaddr 00:07:E9:08:F2:7C Permanent_HWaddr 00:07:E9:08:F2:7C Link up Speed 1000 Duplex Full State up Rx_Packets 565800214 Tx_Packets 591704543 Rx_Bytes 698971884 Tx_Bytes 2315034566 Rx_Errors 5069668 Tx_Errors 0 Rx_Dropped 997 Tx_Dropped 0 Multicast 3 Collisions 0 Rx_Length_Errors 0 Rx_Over_Errors 0 Rx_CRC_Errors 0 Rx_Frame_Errors 0 Rx_FIFO_Errors 5068671 Rx_Missed_Errors 5068671 Tx_Aborted_Errors 0 Tx_Carrier_Errors 0 Tx_FIFO_Errors 0 Tx_Heartbeat_Errors 0 Tx_Window_Errors 0 Tx_Abort_Late_Coll 0 Tx_Deferred_Ok 0 Tx_Single_Coll_Ok 0 Tx_Multi_Coll_Ok 0 Rx_Long_Length_Errors 0 Rx_Short_Length_Errors 0 Rx_Align_Errors 0 Rx_Flow_Control_XON 0 Rx_Flow_Control_XOFF 0 Tx_Flow_Control_XON 0 Tx_Flow_Control_XOFF 5061649 Rx_CSum_Offload_Good 565257553 Rx_CSum_Offload_Errors 0 PHY_Media_Type Copper PHY_Cable_Length 0-50 Meters (+/- 20 Meters) PHY_Extended_10Base_T_Distance Disabled PHY_Cable_Polarity Normal PHY_Disable_Polarity_Correction Disabled PHY_Idle_Errors 1020 PHY_Receive_Errors 1468 PHY_MDI_X_Enabled MDI-X PHY_Local_Receiver_Status OK PHY_Remote_Receiver_Status OK
