Several hours after booting my computer the kernel report:
Sep 8 12:21:47 localhost kernel: eth0: reset did not complete in 10 ms.
Sep 8 12:28:11 localhost kernel: NETDEV WATCHDOG: eth0: transmit timed out
Sep 8 12:28:11 localhost kernel: eth0: Transmit timed out, status 0000, PHY
status 782d, resetting...
Sep 8 12:28:11 localhost kernel: eth0: reset did not complete in 10 ms.
And my network goes down.
I try '/etc/init.d/networking restart' and the script fails to bring up
eth0. My eth controller is still in /proc/pci but it disappear from
ifconfig.
My controller is a D-Link DFE-530TX, and I just want to know if anybody
already had this kind of problem with this device.
Is it a problem related to a controller malfunction or to a bug in the
system (driver, ...) ?
My network work very well with a Realteck 8029 on exactely the same system
with the same config.
Thanks.
Xavier
PS: can you CC me the answer (xdufresne@gmx.fr)
Some informations:
Linux version 2.4.19 (gcc version 2.96 20000731 (Red Hat Linux 7.3
2.96-110))
*** lspci -vv:
00:0b.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev
43)
Subsystem: D-Link System Inc DFE-530TX rev B
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at eb000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at ea000000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
*** dmesg (just after the boot):
Linux version 2.4.19 (root@localhost.localdomain) (gcc version 2.96 20000731
(Red Hat Linux 7.3 2.96-110)) #1 Thu Sep 12 13:05:46 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
BIOS-e820: 000000000bff0000 - 000000000bff0800 (ACPI NVS)
BIOS-e820: 000000000bff0800 - 000000000c000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
191MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 49136
zone(0): 4096 pages.
zone(1): 45040 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=301
BOOT_FILE=/boot/vmlinuz
Initializing CPU#0
Detected 400.915 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 799.53 BogoMIPS
Memory: 192032k/196544k available (1238k kernel code, 4124k reserved, 469k
data, 80k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002
CPU: After generic, caps: 008021bf 808029bf 00000000 00000002
CPU: Common caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb480, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/0586] at 00:07.0
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: detected chipset, but driver not compiled in!
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC AC26400R, ATA DISK drive
hdc: NEC CD-ROM DRIVE:282, ATAPI CD/DVD-ROM drive
hdd: FUJITSU M1636TAU, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 12594960 sectors (6449 MB) w/512KiB Cache, CHS=784/255/63
hdd: 2511840 sectors (1286 MB) w/128KiB Cache, CHS=2491/16/63
hdc: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3
hdd: [PTBL] [622/64/63] hdd1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
via-rhine.c:v1.10-LK1.1.14 May-3-2002 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
PCI: Assigned IRQ 10 for device 00:0b.0
eth0: VIA VT6102 Rhine-II at 0xe800, 00:05:5d:aa:31:1d, IRQ 10.
eth0: MII PHY found at address 8, status 0x7829 advertising 01e1 Link 40a1.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 149M
agpgart: Detected Via MVP3 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 on VIA MVP3 @ 0xe0000000 64MB
[drm] Initialized r128 2.1.6 20010405 on minor 0
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 80k freed
Adding Swap: 305224k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hdc: DMA disabled
call_verify: server accept status: 2
call_verify: server accept status: 2
call_verify: server accept status: 2
RPC: garbage, exit EIO
nfs_get_root: getattr error = 5
-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
