Oops, in my fixed code (the second segment), take out the #if block.
Other than that, yeah, any comments would be cool.
What it should look like:
if (pcnet32_debug > 2)
printk (KERN_DEBUG "pcnet32: pcnet32 media value %#x\n", media);
media &= ~3;
- Mik Mifflin
Maybe the new mobo will be here any moment??
Mik Mifflin wrote:
> I'm trying to get the AM79C978 to use 10Base-T instead of HomePNA, as
> the driver sets it to by default. I found a patch at
> http://www.uwsg.iu.edu/hypermail/linux/net/0102.0/0019.html, but it's
> a little outdated. The driver is pcnet32.c, and I have read the AMD
> documentation of this chipset (I found it at
> http://chip.ms.mff.cuni.cz/~pcguts/net/index.html). Here is the piece
> of code that sets the mode:
> #if 0
> if (pcnet32_debug > 2)
> printk (KERN_DEBUG "pcnet32: pcnet32 media value %#x\n", media);
> media &= ~3;
> media |= 1;
> #endif
>
> This sets the chipset into HomePNA mode (clear the 1 and 2 bit, set
> the 1 bit, see page 178 of the reference), and to set to 10Base-T,
> just clear the last 2 bits. If I see this correctly, changing to code
> to this will do what I need it to do??
> #if 0
> if (pcnet32_debug > 2)
> printk (KERN_DEBUG "pcnet32: pcnet32 media value %#x\n", media);
> media &= ~3;
> #endif
>
> I have tried updating the patch to the new kernel version, with no
> luck, and I just need to get a kernel module to do this one thing.
> Does anyone see anything I have not? Or maybe someone has a new
> version of the patch? I've never done any driver coding before, but I
> was able to follow things all right. Any information on this subject
> is appreciated.
>
> - Mik Mifflin
> Posted from windows until the new motherboard gets here
>
> -
> : send the line "unsubscribe linux-net" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
