Re: making routes permanent

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





A search on RedHat for static routes shows up the following:

http://www.redhat.com/support/resources/tips/Network-Config-Tips
/Network-Config-Tips-4.html

Not sure which distribution that goes with. I couldn't find anything in
the RedHat 7.2 Reference Guide about static routes.

Note that the format suggests that you provide the interface,  not the
gateway:

   "Each line of the static-routes files should have the format:

        device args

   When a network interface is brought up, each line for that interface
    is passed to route as:

        route add -args device
   "

thanks,
Nivedita


Vinod <geekvinod@yahoo.com>@vger.kernel.org on 04/29/2002 12:41:19 PM

Sent by:    linux-net-owner@vger.kernel.org


To:    Glynn Clements <glynn.clements@virgin.net>
cc:    linux-net@vger.kernel.org
Subject:    Re: making routes permanent



i tried putting
any net 10.0.3.0 255.255.255.0 gw 10.0.0.10
in my /etc/sysconfig/static-routes but still it didnt
show up as a permanent route.i looked at the
/etc/rc.d/inet.d/network script and as far as i could
interpret(am a relative newbie),this was supposed to
be the format for my RH 7.2.
can anyone using rh7.2  confirm that "any net 10.0.3.0
255.255.255.0 gw 10.0.0.10" is what needs to be put in
/etc/sysconfig/static-routes to make this entry
permanent?
Thanks,
Vinod
--- Glynn Clements <glynn.clements@virgin.net> wrote:
>
> Vinod wrote:
>
> > how can one make route's permanent?
> > i wanted to make this permanent:
> > route add -net 10.0.3.0 netmaks 255.255.255.0 gw
> > 10.0.0.10 dev eth1
> >
> > i tried putting this in
> /etc/sysconfig/static-routes
> > but it didnt work.
> > i have rh7.2 installed.
>
> I don't know about RH7.x, but for RH6.2 you would
> use the line:
>
> any net 10.0.3.0 255.255.255.0 gw 10.0.0.10
>
> If it's different on 7.x, you can deduce the format
> from the network
> startup script (e.g. /etc/rc.d/init.d/network).
>
> Note that specifying both "gw" and "dev" is
> redundant. If you specify
> a gateway, the device is automatically determined
> from the gateway
> address.
>
> --
> Glynn Clements <glynn.clements@virgin.net>


__________________________________________________
Do You Yahoo!?
Yahoo! Health - your guide to health and wellness
http://health.yahoo.com
-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html



-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux