RE: ip6-localhost (::1) 2990.86 ms !H -> Why ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Pekka Savola [mailto:pekkas@netcore.fi] 
> Sent: Sunday, November 18, 2001 11:07 AM
> To: NDSoftware
> Cc: linux-net@vger.kernel.org
> Subject: RE: ip6-localhost (::1) 2990.86 ms !H -> Why ?
> 
> 
> On Sun, 18 Nov 2001, NDSoftware wrote:
> > > > traceroute to 6bone.net (3ffe:b00:c18:1::10) from 
> > > 3ffe:8271:2101:1::1,
> > > > 30 hops max, 16 byte packets
> > > >  1  ip6-localhost (::1)  2990.86 ms !H  2999.53 ms !H  
> 2999.92 ms !
> > > > 
> > > > Routes on Woody:
> > > > 
> > > > Kernel IPv6 routing table
> > > > Destination                                 Next Hop
> > > > Flags Metric Ref    Use Iface
> > > > ::1/128                                     ::
> > > > U     0      0        0 lo      
> 
> > > > 3ffe:8271:2101:1::1/128                     ::
> > > > U     0      8        1 lo      
> > > > 3ffe:8271:2101:1::/64                       ::
> > > > UA    256    594       0 eth0    
> 
> Please also remove these two routes above (at least the former), as 
> pointed out in the 6bone etc lists.

route -A inet6 del 3ffe:8271:2101:1::1/128 dev lo
SIOCDELRT: No such process

I can't remove it.

If i add a another ip to eth0 et /128 route for lo will be created :(

> 
> > > > 2000::/3                                    ::
> > > > U     1      0        0 eth0    
> > > 
> > > The last one is the problem; effectively you're saying all 
> > > addresses are
> > > on-link, and this is better than the default route to your 
> > > router box.  
> > > Remove it and the 6bone should work just fine.
> > 
> > Not if i remove this route:
> > 
> > connect: Network is unreachable
> 
> Try ping6'ing the link-local address of your gateway.
> 
> FWIW, autoconfigured IPv6 node's routing table should look 
> something like:
> 
> --8<--
> Kernel IPv6 routing table
> Destination                                 Next Hop          
>                       Flags Metric Ref    Use Iface
> ::1/128                                     ::                
>                       U     0      0        0 lo      
> 2001:xxx:10:10:250:4ff:fe6a:db55/128        ::                
>                       U     0      5        0 lo      
> 2001:xxx:10:10::/64                         ::                
>                       UA    256    21123    0 eth0    
> fe80::250:4ff:fe6a:db55/128                 ::                
>                       U     0      1        0 lo      
> fe80::/10                                   ::                
>                       UA    256    0        0 eth0    
> ff00::/8                                    ::                
>                       UA    256    0        0 eth0    
> ::/0                                        
> fe80::200:f8ff:fe08:3e0d                UGDA  1024   7        
> 0 eth0    
> --8<--
> 
> Here 250:4ff:fe6a:db55 addresses are local.

traceroute6 fe80::2d0:70ff:fe01:811b
connect: Invalid argument


Yes but i don't use ra.
I have try to use ra -> same problem.

> 
> -- 
> Pekka Savola                 "Tell me of difficulties surmounted,
> Netcore Oy                   not those you stumble over and fall"
> Systems. Networks. Security.  -- Robert Jordan: A Crown of Swords
> 
> 

-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux