Hi, I have a problem with my 3com networkcard. My system is a ASUS P2B-F with a PII and 256MB RAM, LSI SCSI Controller with an 53c875 and 3c905B. More infos are in the output of "lspci -vx" appended as lspci-vx.txt. The networkcard is connected to a 100Mbit CNet switch. The softwareconfig is a SuSE 7.3 with kernel 2.4.10. The included driver is LK1.1.16 19 July 2001 akpm. The situation now is, that the connection LED from the switch stays off when the computer is started. Changing the cable doesen't help, changing the switchport too. Only replacing the card by an other 905B led to a running network including LED lighting. So my first thought was about a broken card :-(( But while reading in several mailinglist archives I found mails with nearly the same errormessages and answaers saying that it could me a softwareproblem. Well, the worst thing I get out of all these messages is, that the networkadapter doesn't know about a link!!! The situation the error happend first was on saturday while using vmware. The messages generated at that time are included in file error.txt. The messages are repeated because of retrying the work within vmware. It was a samba transfer. The messages generated now are included in banner.txt. When starting the network the messages included in file networkstart.txt are generated. Some additional infos from "mii-diag -v" are included in file mii-diag-v.txt and the output from vortex-diag -aaee is included in vortex-diag-aaee.txt. My qustion now, is it a hardware damage or just a software problem? If it is a softwareproblem, how can it be solved? Do you need to know any additional infos? Chris -- Christoph Dohmen C-Dohmen@gmx.de
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03) Flags: bus master, medium devsel, latency 64 Memory at e4000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 00: 86 80 90 71 06 01 10 22 03 00 00 06 00 40 00 00 10: 08 00 00 e4 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: e0800000-e1dfffff Prefetchable memory behind bridge: e1f00000-e3ffffff 00: 86 80 91 71 17 01 20 02 03 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 40 e0 d0 a0 22 20: 80 e0 d0 e1 f0 e1 f0 e3 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00:04.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) Flags: bus master, medium devsel, latency 0 00: 86 80 10 71 0f 00 80 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:04.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Flags: bus master, medium devsel, latency 32 I/O ports at d800 [size=16] 00: 86 80 11 71 05 00 80 02 01 80 01 01 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:04.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Flags: bus master, medium devsel, latency 32, IRQ 9 I/O ports at d400 [size=32] 00: 86 80 12 71 05 00 80 02 01 00 03 0c 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 04 00 00 00:04.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02) Flags: medium devsel, IRQ 9 00: 86 80 13 71 03 00 80 02 02 00 80 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24) Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 Flags: bus master, medium devsel, latency 32, IRQ 15 I/O ports at d000 [size=128] Memory at e0000000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 1 00: b7 10 55 90 17 00 10 02 24 00 00 02 08 20 00 00 10: 01 d0 00 00 00 00 00 e0 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 55 90 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0f 01 0a 0a 00:0b.0 SCSI storage controller: LSI Logic Corp. / Symbios Logic Inc. (formerly NCR) 53c875 (rev 04) Flags: bus master, medium devsel, latency 144, IRQ 12 I/O ports at b800 [size=256] Memory at df800000 (32-bit, non-prefetchable) [size=256] Memory at df000000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K] 00: 00 10 0f 00 17 00 00 02 04 00 00 01 08 90 00 00 10: 01 b8 00 00 00 00 80 df 00 00 00 df 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0c 01 11 40 00:0d.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz] (rev 02) Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH FRITZ!Card ISDN Controller Flags: medium devsel, IRQ 9 Memory at de800000 (32-bit, non-prefetchable) [size=32] I/O ports at b400 [size=32] 00: 44 12 00 0a 03 00 80 02 02 00 80 02 00 00 00 00 10: 00 00 80 de 01 b4 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 44 12 00 0a 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 82) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc.: Unknown device 0541 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at e2000000 (32-bit, prefetchable) [size=32M] Memory at e1000000 (32-bit, non-prefetchable) [size=16K] Memory at e0800000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at e1fe0000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Capabilities: [f0] AGP version 2.0 00: 2b 10 25 05 07 00 90 02 82 00 00 03 08 40 00 00 10: 08 00 00 e2 00 00 00 e1 00 00 80 e0 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 2b 10 41 05 30: 00 00 fe e1 dc 00 00 00 00 00 00 00 0b 01 10 20
Oct 27 13:04:49 obelix kernel: bridge-eth0: history full Oct 27 13:04:53 obelix last message repeated 88 times Oct 27 13:04:53 obelix kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000070 Oct 27 13:04:53 obelix kernel: printing eip: Oct 27 13:04:53 obelix kernel: cde9e5f5 Oct 27 13:04:53 obelix kernel: *pde = 00000000 Oct 27 13:04:53 obelix kernel: Oops: 0000 Oct 27 13:04:53 obelix kernel: CPU: 0 Oct 27 13:04:53 obelix kernel: EIP: 0010:[evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19503627/96] Oct 27 13:04:53 obelix kernel: EFLAGS: 00013282 Oct 27 13:04:53 obelix kernel: eax: 00000000 ebx: 00000000 ecx: cf71a000 edx: 00000000 Oct 27 13:04:53 obelix kernel: esi: c0560960 edi: cf54b8d4 ebp: cf54b8a0 esp: cf71beb0 Oct 27 13:04:53 obelix kernel: ds: 0018 es: 0018 ss: 0018 Oct 27 13:04:53 obelix kernel: Process win95.cfg (pid: 2455, stackpage=cf71b000)Oct 27 13:04:53 obelix kernel: Stack: ce9d1c04 00000000 ce9d1c00 c07cfcc0 00003282 00000000 c02053a8 cf54a800 Oct 27 13:04:54 obelix kernel: 00000020 00000020 c07cfcc0 cde9cff6 cf54b8f4 c07cf4a0 00003202 ce9d1c04 Oct 27 13:04:54 obelix kernel: 00000000 ce9d1c00 c07cfcc0 cde9d53e ce9d1c04 c07cf4a0 c07cfcc0 c01a13e5 Oct 27 13:04:54 obelix kernel: Call Trace: [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19509258/96] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19507906/96] [bad_flp_intr+105/224] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19509258/96] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19506013/96] Oct 27 13:04:54 obelix kernel: [vfs_follow_link+169/284] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19512305/96] [do_truncate+135/164] [do_signal+255/660] Oct 27 13:04:54 obelix kernel: Oct 27 13:04:54 obelix kernel: Code: 8b 42 70 83 f8 01 74 0a ff 4a 70 0f 94 c0 84 c0 74 0c 83 c4 Oct 27 13:11:38 obelix kernel: bridge-eth0: history full Oct 27 13:11:47 obelix last message repeated 279 times Oct 27 13:11:47 obelix kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000070 Oct 27 13:11:47 obelix kernel: printing eip: Oct 27 13:11:47 obelix kernel: cde9e5f5 Oct 27 13:11:47 obelix kernel: *pde = 00000000 Oct 27 13:11:47 obelix kernel: Oops: 0000 Oct 27 13:11:47 obelix kernel: CPU: 0 Oct 27 13:11:47 obelix kernel: EIP: 0010:[evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19503627/96] Oct 27 13:11:47 obelix kernel: EFLAGS: 00013282 Oct 27 13:11:47 obelix kernel: eax: 00000000 ebx: 00000000 ecx: c9976000 edx: 00000000 Oct 27 13:11:47 obelix kernel: esi: c2a05800 edi: cf54b8d4 ebp: cf54b8a0 esp: c9977eb0 Oct 27 13:11:47 obelix kernel: ds: 0018 es: 0018 ss: 0018 Oct 27 13:11:47 obelix kernel: Process win95.cfg (pid: 2480, stackpage=c9977000)Oct 27 13:11:47 obelix kernel: Stack: ce9d1c04 00000000 ce9d1c00 c208f0a0 ce9d1c3c 00000001 cb49c4ec cf54a800 Oct 27 13:11:47 obelix kernel: cdef2a20 cb49c4f0 c208f0a0 cde9cff6 cf54b8f4 c0560500 00003202 ce9d1c04 Oct 27 13:11:47 obelix kernel: 00000000 ce9d1c00 c208f0a0 cde9d53e ce9d1c04 c0560500 c208f0a0 c01a13e5 Oct 27 13:11:47 obelix kernel: Call Trace: [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19509258/96] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19507906/96] [bad_flp_intr+105/224] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19509258/96] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19506013/96] Oct 27 13:11:47 obelix kernel: [vfs_follow_link+169/284] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19512305/96] [do_truncate+135/164] [do_signal+255/660] Oct 27 13:11:47 obelix kernel: Oct 27 13:11:47 obelix kernel: Code: 8b 42 70 83 f8 01 74 0a ff 4a 70 0f 94 c0 84 c0 74 0c 83 c4 Oct 27 13:13:52 obelix kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html Oct 27 13:13:52 obelix kernel: 00:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd000. Vers LK1.1.16 Oct 27 13:13:52 obelix kernel: 00:0a.0: Media override to transceiver type 4 (100baseTX). Oct 27 13:13:52 obelix kernel: eth0: Media override to transceiver 4 (100baseTX). Oct 27 13:18:28 obelix kernel: bridge-eth0: history full Oct 27 13:18:57 obelix last message repeated 362 times Oct 27 13:18:57 obelix kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000070 Oct 27 13:18:57 obelix kernel: printing eip: Oct 27 13:18:57 obelix kernel: cdec65f5 Oct 27 13:18:57 obelix kernel: *pde = 00000000 Oct 27 13:18:57 obelix kernel: Oops: 0000 Oct 27 13:18:57 obelix kernel: CPU: 0 Oct 27 13:18:57 obelix kernel: EIP: 0010:[evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19339787/96] Oct 27 13:18:57 obelix kernel: EFLAGS: 00013282 Oct 27 13:18:57 obelix kernel: eax: 00000000 ebx: 00000000 ecx: c5d1e000 edx: 00000000 Oct 27 13:18:57 obelix kernel: esi: c949a700 edi: cf533ad4 ebp: cf533aa0 esp: c5d1feb0 Oct 27 13:18:57 obelix kernel: ds: 0018 es: 0018 ss: 0018 Oct 27 13:18:57 obelix kernel: Process win95.cfg (pid: 1053, stackpage=c5d1f000)Oct 27 13:18:57 obelix kernel: Stack: ce9d6c04 00000000 ce9d6c00 c949ade0 cf44de60 00000001 c02435c8 cf532800 Oct 27 13:18:57 obelix kernel: c011945a 00003046 c949ade0 cdec4ff6 cf533af4 c949a200 00003202 ce9d6c04 Oct 27 13:18:57 obelix kernel: 00000000 ce9d6c00 c949ade0 cdec553e ce9d6c04 c949a200 c949ade0 c01a13e5 Oct 27 13:18:57 obelix kernel: Call Trace: [sys_wait4+894/932] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19345418/96] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19344066/96] [bad_flp_intr+105/224] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19345418/96] Oct 27 13:18:57 obelix kernel: [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19342173/96] [vfs_follow_link+169/284] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19348465/96] [do_truncate+135/164] [do_signal+255/660] Oct 27 13:18:57 obelix kernel: Oct 27 13:18:57 obelix kernel: Code: 8b 42 70 83 f8 01 74 0a ff 4a 70 0f 94 c0 84 c0 74 0c 83 c4 Oct 27 13:23:42 obelix kernel: bridge-eth0: history full Oct 27 13:23:51 obelix last message repeated 270 times Oct 27 13:23:51 obelix kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000070 Oct 27 13:23:51 obelix kernel: printing eip: Oct 27 13:23:51 obelix kernel: cdec65f5 Oct 27 13:23:51 obelix kernel: *pde = 00000000 Oct 27 13:23:51 obelix kernel: Oops: 0000 Oct 27 13:23:51 obelix kernel: CPU: 0 Oct 27 13:23:51 obelix kernel: EIP: 0010:[evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19339787/96] Oct 27 13:23:51 obelix kernel: EFLAGS: 00013282 Oct 27 13:23:51 obelix kernel: eax: 00000000 ebx: 00000000 ecx: c53c2000 edx: 00000000 Oct 27 13:23:51 obelix kernel: esi: c7334d00 edi: cf533ad4 ebp: cf533aa0 esp: c53c3eb0 Oct 27 13:23:51 obelix kernel: ds: 0018 es: 0018 ss: 0018 Oct 27 13:23:51 obelix kernel: Process win95.cfg (pid: 1067, stackpage=c53c3000)Oct 27 13:23:51 obelix kernel: Stack: ce9d6c04 00000000 ce9d6c00 cf44de60 ce9d6c3c 00000001 c02053a8 cf532800 Oct 27 13:23:51 obelix kernel: 00000020 00000020 cf44de60 cdec4ff6 cf533af4 cf44d8c0 00003202 ce9d6c04 Oct 27 13:23:51 obelix kernel: 00000000 ce9d6c00 cf44de60 cdec553e ce9d6c04 cf44d8c0 cfffc5e8 00003246 Oct 27 13:23:51 obelix kernel: Call Trace: [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19345418/96] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19344066/96] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19345418/96] [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19342173/96] [vfs_follow_link+169/284] Oct 27 13:23:51 obelix kernel: [evdev:__insmod_evdev_O/lib/modules/2.4.10-4GB/kernel/drivers/inpu+-19348465/96] [do_truncate+135/164] [do_signal+255/660] Oct 27 13:23:51 obelix kernel: Oct 27 13:23:51 obelix kernel: Code: 8b 42 70 83 f8 01 74 0a ff 4a 70 0f 94 c0 84 c0 74 0c 83 c4 Oct 28 14:08:49 obelix kernel: PCI: Enabling device 00:0a.0 (0000 -> 0003) Oct 28 14:08:49 obelix kernel: PCI: Found IRQ 15 for device 00:0a.0 Oct 28 14:08:49 obelix kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html Oct 28 14:08:49 obelix kernel: 00:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd000. Vers LK1.1.16 Oct 28 14:08:49 obelix kernel: PCI: Setting latency timer of device 00:0a.0 to 64 Oct 28 14:08:49 obelix kernel: 00:0a.0: Media override to transceiver type 4 (100baseTX). Oct 28 14:08:49 obelix kernel: eth0: Media override to transceiver 4 (100baseTX). Oct 28 14:08:49 obelix kernel: eth0: command 0x5800 did not complete! Status=0xffff Oct 28 14:08:49 obelix kernel: eth0: command 0x2804 did not complete! Status=0xffff Oct 28 14:09:05 obelix kernel: NETDEV WATCHDOG: eth0: transmit timed out Oct 28 14:09:05 obelix kernel: eth0: transmit timed out, tx_status ff status ffff. Oct 28 14:09:05 obelix kernel: diagnostics: net ffff media ffff dma ffffffff. Oct 28 14:09:05 obelix kernel: eth0: Transmitter encountered 16 collisions -- network cable problem? Oct 28 14:09:05 obelix kernel: eth0: Interrupt posted but not delivered -- IRQ blocked by another device? Oct 28 14:09:05 obelix kernel: Flags; bus-master 1, dirty 0(0) current 16(0) Oct 28 14:09:05 obelix kernel: Transmit list ffffffff vs. cf36b200. Oct 28 14:09:05 obelix kernel: eth0: command 0x3002 did not complete! Status=0xffff Oct 28 14:09:05 obelix kernel: 0: @cf36b200 length 8000006e status 0000006e Oct 28 14:09:05 obelix kernel: 1: @cf36b240 length 8000006e status 0000006e Oct 28 14:09:05 obelix kernel: 2: @cf36b280 length 8000006e status 0000006e Oct 28 14:09:05 obelix kernel: 3: @cf36b2c0 length 8000006e status 0000006e Oct 28 14:09:06 obelix kernel: 4: @cf36b300 length 8000006e status 0000006e Oct 28 14:09:06 obelix kernel: 5: @cf36b340 length 800000ff status 000000ff Oct 28 14:09:06 obelix kernel: 6: @cf36b380 length 8000006e status 0000006e Oct 28 14:09:06 obelix kernel: 7: @cf36b3c0 length 8000006e status 0000006e Oct 28 14:09:06 obelix kernel: 8: @cf36b400 length 8000006e status 0000006e Oct 28 14:09:06 obelix kernel: 9: @cf36b440 length 8000006e status 0000006e Oct 28 14:09:06 obelix kernel: 10: @cf36b480 length 8000006e status 0000006e Oct 28 14:09:06 obelix kernel: 11: @cf36b4c0 length 8000006e status 0000006e Oct 28 14:09:06 obelix kernel: 12: @cf36b500 length 8000006e status 0000006e Oct 28 14:09:06 obelix kernel: 13: @cf36b540 length 8000006e status 0000006e Oct 28 14:09:06 obelix kernel: 14: @cf36b580 length 8000006e status 8000006e Oct 28 14:09:07 obelix kernel: 15: @cf36b5c0 length 8000006e status 8000006e Oct 28 14:09:07 obelix kernel: eth0: command 0x5800 did not complete! Status=0xffff Oct 28 14:09:07 obelix kernel: eth0: Resetting the Tx ring pointer. Oct 28 14:09:18 obelix kernel: NETDEV WATCHDOG: eth0: transmit timed out Oct 28 14:09:18 obelix kernel: eth0: transmit timed out, tx_status ff status ffff. Oct 28 14:09:18 obelix kernel: diagnostics: net ffff media ffff dma ffffffff. Oct 28 14:09:18 obelix kernel: eth0: Transmitter encountered 16 collisions -- network cable problem? Oct 28 14:09:18 obelix kernel: eth0: Interrupt posted but not delivered -- IRQ blocked by another device? Oct 28 14:09:18 obelix kernel: Flags; bus-master 1, dirty 0(0) current 16(0) Oct 28 14:09:18 obelix kernel: Transmit list ffffffff vs. cf36b200. Oct 28 14:09:18 obelix kernel: eth0: command 0x3002 did not complete! Status=0xffff Oct 28 14:09:18 obelix kernel: 0: @cf36b200 length 8000006e status 0000006e Oct 28 14:09:18 obelix kernel: 1: @cf36b240 length 8000006e status 0000006e Oct 28 14:09:18 obelix kernel: 2: @cf36b280 length 8000006e status 0000006e Oct 28 14:09:18 obelix kernel: 3: @cf36b2c0 length 8000006e status 0000006e Oct 28 14:09:19 obelix kernel: 4: @cf36b300 length 8000006e status 0000006e Oct 28 14:09:19 obelix kernel: 5: @cf36b340 length 800000ff status 000000ff Oct 28 14:09:19 obelix kernel: 6: @cf36b380 length 8000006e status 0000006e Oct 28 14:09:19 obelix kernel: 7: @cf36b3c0 length 8000006e status 0000006e Oct 28 14:09:19 obelix kernel: 8: @cf36b400 length 8000006e status 0000006e Oct 28 14:09:19 obelix kernel: 9: @cf36b440 length 8000006e status 0000006e Oct 28 14:09:19 obelix kernel: 10: @cf36b480 length 8000006e status 0000006e Oct 28 14:09:19 obelix kernel: 11: @cf36b4c0 length 8000006e status 0000006e Oct 28 14:09:19 obelix kernel: 12: @cf36b500 length 8000006e status 0000006e Oct 28 14:09:19 obelix kernel: 13: @cf36b540 length 8000006e status 0000006e Oct 28 14:09:19 obelix kernel: 14: @cf36b580 length 8000006e status 8000006e Oct 28 14:09:20 obelix kernel: 15: @cf36b5c0 length 8000006e status 8000006e Oct 28 14:09:20 obelix kernel: eth0: command 0x5800 did not complete! Status=0xffff Oct 28 14:09:20 obelix kernel: eth0: Resetting the Tx ring pointer. Oct 28 14:09:31 obelix kernel: NETDEV WATCHDOG: eth0: transmit timed out Oct 28 14:09:31 obelix kernel: eth0: transmit timed out, tx_status ff status ffff. Oct 28 14:09:31 obelix kernel: diagnostics: net ffff media ffff dma ffffffff. Oct 28 14:09:31 obelix kernel: eth0: Transmitter encountered 16 collisions -- network cable problem? Oct 28 14:09:31 obelix kernel: eth0: Interrupt posted but not delivered -- IRQ blocked by another device? Oct 28 14:09:31 obelix kernel: Flags; bus-master 1, dirty 0(0) current 16(0) Oct 28 14:09:31 obelix kernel: Transmit list ffffffff vs. cf36b200. Oct 28 14:09:31 obelix kernel: eth0: command 0x3002 did not complete! Status=0xffff Oct 28 14:09:31 obelix kernel: 0: @cf36b200 length 8000006e status 0000006e Oct 28 14:09:31 obelix kernel: 1: @cf36b240 length 8000006e status 0000006e Oct 28 14:09:31 obelix kernel: 2: @cf36b280 length 8000006e status 0000006e Oct 28 14:09:31 obelix kernel: 3: @cf36b2c0 length 8000006e status 0000006e Oct 28 14:09:31 obelix kernel: 4: @cf36b300 length 8000006e status 0000006e Oct 28 14:09:32 obelix kernel: 5: @cf36b340 length 800000ff status 000000ff Oct 28 14:09:32 obelix kernel: 6: @cf36b380 length 8000006e status 0000006e Oct 28 14:09:32 obelix kernel: 7: @cf36b3c0 length 8000006e status 0000006e Oct 28 14:09:33 obelix kernel: 8: @cf36b400 length 8000006e status 0000006e Oct 28 14:09:33 obelix kernel: 9: @cf36b440 length 8000006e status 0000006e Oct 28 14:09:33 obelix kernel: 10: @cf36b480 length 8000006e status 0000006e Oct 28 14:09:33 obelix kernel: 11: @cf36b4c0 length 8000006e status 0000006e Oct 28 14:09:33 obelix kernel: 12: @cf36b500 length 8000006e status 0000006e Oct 28 14:09:33 obelix kernel: 13: @cf36b540 length 8000006e status 0000006e Oct 28 14:09:33 obelix kernel: 14: @cf36b580 length 8000006e status 8000006e Oct 28 14:09:33 obelix kernel: 15: @cf36b5c0 length 8000006e status 8000006e Oct 28 14:09:33 obelix kernel: eth0: command 0x5800 did not complete! Status=0xffff Oct 28 14:09:33 obelix kernel: eth0: Resetting the Tx ring pointer. Oct 28 14:09:42 obelix kernel: NETDEV WATCHDOG: eth0: transmit timed out Oct 28 14:09:43 obelix kernel: eth0: transmit timed out, tx_status ff status ffff. Oct 28 14:09:43 obelix kernel: diagnostics: net ffff media ffff dma ffffffff. Oct 28 14:09:43 obelix kernel: eth0: Transmitter encountered 16 collisions -- network cable problem? Oct 28 14:09:43 obelix kernel: eth0: Interrupt posted but not delivered -- IRQ blocked by another device? Oct 28 14:09:43 obelix kernel: Flags; bus-master 1, dirty 0(0) current 16(0) Oct 28 14:09:43 obelix kernel: Transmit list ffffffff vs. cf36b200. Oct 28 14:09:43 obelix kernel: eth0: command 0x3002 did not complete! Status=0xffff Oct 28 14:09:43 obelix kernel: 0: @cf36b200 length 8000006e status 0000006e Oct 28 14:09:43 obelix kernel: 1: @cf36b240 length 8000006e status 0000006e Oct 28 14:09:43 obelix kernel: 2: @cf36b280 length 8000006e status 0000006e Oct 28 14:09:43 obelix kernel: 3: @cf36b2c0 length 8000006e status 0000006e Oct 28 14:09:43 obelix kernel: 4: @cf36b300 length 8000006e status 0000006e Oct 28 14:09:43 obelix kernel: 4: @cf36b300 length 8000006e status 0000006e Oct 28 14:09:43 obelix kernel: 5: @cf36b340 length 800000ff status 000000ff Oct 28 14:09:43 obelix kernel: 6: @cf36b380 length 8000006e status 0000006e Oct 28 14:09:43 obelix kernel: 7: @cf36b3c0 length 8000006e status 0000006e Oct 28 14:09:43 obelix kernel: 8: @cf36b400 length 8000006e status 0000006e Oct 28 14:09:43 obelix kernel: 9: @cf36b440 length 8000006e status 0000006e Oct 28 14:09:43 obelix kernel: 10: @cf36b480 length 8000006e status 0000006e Oct 28 14:09:43 obelix kernel: 11: @cf36b4c0 length 8000006e status 0000006e Oct 28 14:09:43 obelix kernel: 12: @cf36b500 length 8000006e status 0000006e Oct 28 14:09:43 obelix kernel: 13: @cf36b540 length 8000006e status 0000006e Oct 28 14:09:43 obelix kernel: 14: @cf36b580 length 8000006e status 8000006e Oct 28 14:09:44 obelix kernel: 15: @cf36b5c0 length 8000006e status 8000006e Oct 28 14:09:44 obelix kernel: eth0: command 0x5800 did not complete! Status=0xffff Oct 28 14:09:44 obelix kernel: eth0: Resetting the Tx ring pointer. Oct 28 14:09:50 obelix PAM-unix2[695]: session started for user root, service xdm Oct 28 14:09:56 obelix kernel: NETDEV WATCHDOG: eth0: transmit timed out Oct 28 14:09:56 obelix kernel: eth0: transmit timed out, tx_status ff status ffff. Oct 28 14:09:56 obelix kernel: diagnostics: net ffff media ffff dma ffffffff. Oct 28 14:09:56 obelix kernel: eth0: Transmitter encountered 16 collisions -- network cable problem? Oct 28 14:09:56 obelix kernel: eth0: Interrupt posted but not delivered -- IRQ blocked by another device? Oct 28 14:09:56 obelix kernel: Flags; bus-master 1, dirty 0(0) current 16(0) Oct 28 14:09:56 obelix kernel: Transmit list ffffffff vs. cf36b200. Oct 28 14:09:56 obelix kernel: eth0: command 0x3002 did not complete! Status=0xffff Oct 28 14:09:56 obelix kernel: 0: @cf36b200 length 8000006e status 0000006e Oct 28 14:09:56 obelix kernel: 1: @cf36b240 length 8000006e status 0000006e Oct 28 14:09:56 obelix kernel: 2: @cf36b280 length 8000006e status 0000006e Oct 28 14:09:56 obelix kernel: 3: @cf36b2c0 length 8000006e status 0000006e Oct 28 14:09:56 obelix kernel: 4: @cf36b300 length 8000006e status 0000006e Oct 28 14:09:58 obelix kernel: 5: @cf36b340 length 800000ff status 000000ff Oct 28 14:09:58 obelix kernel: 6: @cf36b380 length 8000006e status 0000006e Oct 28 14:09:58 obelix kernel: 7: @cf36b3c0 length 8000006e status 0000006e Oct 28 14:09:58 obelix kernel: 8: @cf36b400 length 8000006e status 0000006e Oct 28 14:09:58 obelix kernel: 9: @cf36b440 length 8000006e status 0000006e Oct 28 14:09:58 obelix kernel: 10: @cf36b480 length 8000006e status 0000006e Oct 28 14:09:58 obelix kernel: 11: @cf36b4c0 length 8000006e status 0000006e Oct 28 14:09:58 obelix kernel: 12: @cf36b500 length 8000006e status 0000006e Oct 28 14:09:58 obelix kernel: 13: @cf36b540 length 8000006e status 0000006e Oct 28 14:09:58 obelix kernel: 14: @cf36b580 length 8000006e status 8000006e Oct 28 14:09:58 obelix kernel: 15: @cf36b5c0 length 8000006e status 8000006e Oct 28 14:09:58 obelix kernel: eth0: command 0x5800 did not complete! Status=0xffff Oct 28 14:09:58 obelix kernel: eth0: Resetting the Tx ring pointer. Oct 28 14:10:09 obelix kernel: NETDEV WATCHDOG: eth0: transmit timed out Oct 28 14:10:09 obelix kernel: eth0: transmit timed out, tx_status ff status ffff. Oct 28 14:10:09 obelix kernel: diagnostics: net ffff media ffff dma ffffffff. Oct 28 14:10:09 obelix kernel: eth0: Transmitter encountered 16 collisions -- network cable problem? Oct 28 14:10:09 obelix kernel: eth0: Interrupt posted but not delivered -- IRQ blocked by another device? Oct 28 14:10:09 obelix kernel: Flags; bus-master 1, dirty 0(0) current 16(0) Oct 28 14:10:09 obelix kernel: Transmit list ffffffff vs. cf36b200. Oct 28 14:10:09 obelix kernel: eth0: command 0x3002 did not complete! Status=0xffff Oct 28 14:10:09 obelix kernel: 0: @cf36b200 length 8000006e status 0000006e Oct 28 14:10:09 obelix kernel: 1: @cf36b240 length 8000006e status 0000006e Oct 28 14:10:09 obelix kernel: 2: @cf36b280 length 8000006e status 0000006e Oct 28 14:10:09 obelix kernel: 3: @cf36b2c0 length 8000006e status 0000006e Oct 28 14:10:09 obelix kernel: 4: @cf36b300 length 8000006e status 0000006e Oct 28 14:10:10 obelix kernel: 5: @cf36b340 length 800000ff status 000000ff Oct 28 14:10:10 obelix kernel: 6: @cf36b380 length 8000006e status 0000006e Oct 28 14:10:10 obelix kernel: 7: @cf36b3c0 length 8000006e status 0000006e Oct 28 14:10:10 obelix kernel: 8: @cf36b400 length 8000006e status 0000006e Oct 28 14:10:10 obelix kernel: 9: @cf36b440 length 8000006e status 0000006e Oct 28 14:10:10 obelix kernel: 10: @cf36b480 length 8000006e status 0000006e Oct 28 14:10:10 obelix kernel: 11: @cf36b4c0 length 8000006e status 0000006e Oct 28 14:10:10 obelix kernel: 12: @cf36b500 length 8000006e status 0000006e Oct 28 14:10:10 obelix kernel: 13: @cf36b540 length 8000006e status 0000006e Oct 28 14:10:10 obelix kernel: 14: @cf36b580 length 8000006e status 8000006e Oct 28 14:10:10 obelix kernel: 15: @cf36b5c0 length 8000006e status 8000006e Oct 28 14:10:10 obelix kernel: eth0: command 0x5800 did not complete! Status=0xffff Oct 28 14:10:10 obelix kernel: eth0: Resetting the Tx ring pointer. Oct 28 14:10:19 obelix modprobe: modprobe: Can't locate module sound-slot-0 Oct 28 14:10:19 obelix modprobe: modprobe: Can't locate module sound-service-0-3Oct 28 14:10:22 obelix kernel: NETDEV WATCHDOG: eth0: transmit timed out Oct 28 14:10:22 obelix kernel: eth0: transmit timed out, tx_status ff status ffff. Oct 28 14:10:22 obelix kernel: diagnostics: net ffff media ffff dma ffffffff. Oct 28 14:10:22 obelix kernel: eth0: Transmitter encountered 16 collisions -- network cable problem? Oct 28 14:10:22 obelix kernel: eth0: Interrupt posted but not delivered -- IRQ blocked by another device? Oct 28 14:10:22 obelix kernel: Flags; bus-master 1, dirty 0(0) current 16(0) Oct 28 14:10:22 obelix kernel: Transmit list ffffffff vs. cf36b200. Oct 28 14:10:22 obelix kernel: eth0: command 0x3002 did not complete! Status=0xffff Oct 28 14:10:22 obelix kernel: 0: @cf36b200 length 8000006e status 0000006e Oct 28 14:10:22 obelix kernel: 1: @cf36b240 length 8000006e status 0000006e Oct 28 14:10:22 obelix kernel: 2: @cf36b280 length 8000006e status 0000006e Oct 28 14:10:22 obelix kernel: 3: @cf36b2c0 length 8000006e status 0000006e Oct 28 14:10:22 obelix kernel: 4: @cf36b300 length 8000006e status 0000006e Oct 28 14:10:22 obelix kernel: 5: @cf36b340 length 800000ff status 000000ff Oct 28 14:10:22 obelix kernel: 6: @cf36b380 length 8000006e status 0000006e Oct 28 14:10:22 obelix kernel: 7: @cf36b3c0 length 8000006e status 0000006e Oct 28 14:10:22 obelix kernel: 8: @cf36b400 length 8000006e status 0000006e Oct 28 14:10:22 obelix kernel: 9: @cf36b440 length 8000006e status 0000006e Oct 28 14:10:22 obelix kernel: 10: @cf36b480 length 8000006e status 0000006e Oct 28 14:10:22 obelix kernel: 11: @cf36b4c0 length 8000006e status 0000006e Oct 28 14:10:22 obelix kernel: 12: @cf36b500 length 8000006e status 0000006e Oct 28 14:10:22 obelix kernel: 13: @cf36b540 length 8000006e status 0000006e Oct 28 14:10:22 obelix kernel: 14: @cf36b580 length 8000006e status 8000006e Oct 28 14:10:22 obelix kernel: 15: @cf36b5c0 length 8000006e status 8000006e Oct 28 14:10:22 obelix kernel: eth0: command 0x5800 did not complete! Status=0xffff Oct 28 14:10:22 obelix kernel: eth0: Resetting the Tx ring pointer.
Oct 29 18:39:11 obelix kernel: PCI: Found IRQ 15 for device 00:0a.0 Oct 29 18:39:11 obelix kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html Oct 29 18:39:11 obelix kernel: See Documentation/networking/vortex.txt Oct 29 18:39:11 obelix kernel: 00:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd000. Vers LK1.1.16 Oct 29 18:39:11 obelix kernel: 00:a0:24:50:26:e7, IRQ 15 Oct 29 18:39:11 obelix kernel: product code 4e4b rev 00.9 date 04-20-98 Oct 29 18:39:11 obelix kernel: Internal config register is 400000, transceivers 0xa. Oct 29 18:39:11 obelix kernel: 8K byte-wide RAM 5:3 Rx:Tx split, 100baseTX interface. Oct 29 18:39:11 obelix kernel: Enabling bus-master transmits and whole-frame receives. Oct 29 18:39:11 obelix kernel: 00:0a.0: scatter/gather enabled. h/w checksums enabled Oct 29 18:39:11 obelix kernel: eth0: Filling in the Rx ring. Oct 29 18:39:11 obelix kernel: eth0: using default media 100baseTX Oct 29 18:39:11 obelix kernel: eth0: Initial media type 100baseTX. Oct 29 18:39:11 obelix kernel: eth0: vortex_up() InternalConfig 00400000. Oct 29 18:39:11 obelix kernel: eth0: vortex_up() irq 15 media status 8080. Oct 29 18:39:11 obelix kernel: eth0: Media selection timer tick happened, 100baseTX. Oct 29 18:39:11 obelix kernel: dev->watchdog_timeo=500 Oct 29 18:39:11 obelix kernel: eth0: Media 100baseTX has no link beat, 8080. Oct 29 18:39:11 obelix kernel: eth0: Media selection failed, now trying 10baseT port. Oct 29 18:39:11 obelix kernel: wrote 0x00000000 to Wn3_Config Oct 29 18:39:11 obelix kernel: eth0: Media selection timer finished, 10baseT. Oct 29 18:39:11 obelix kernel: eth0: Media selection timer tick happened, 10baseT. Oct 29 18:39:11 obelix kernel: dev->watchdog_timeo=500 Oct 29 18:39:11 obelix kernel: eth0: Media 10baseT has no link beat, 80c0. Oct 29 18:39:11 obelix kernel: eth0: Media selection failing, using default 100baseTX port. Oct 29 18:39:11 obelix kernel: wrote 0x00400000 to Wn3_Config Oct 29 18:39:11 obelix kernel: eth0: Media selection timer finished, 100baseTX. Oct 29 18:40:06 obelix kernel: eth0: Media selection timer tick happened, 100baseTX. Oct 29 18:40:06 obelix kernel: dev->watchdog_timeo=500 Oct 29 18:40:06 obelix kernel: eth0: Media 100baseTX has no link beat, 8080. Oct 29 18:40:06 obelix kernel: eth0: Media selection failed, now trying 10baseT port. Oct 29 18:40:06 obelix kernel: wrote 0x00000000 to Wn3_Config Oct 29 18:40:06 obelix kernel: eth0: Media selection timer finished, 10baseT. Oct 29 18:40:07 obelix kernel: eth0: Media selection timer tick happened, 10baseT. Oct 29 18:40:07 obelix kernel: dev->watchdog_timeo=500 Oct 29 18:40:07 obelix kernel: eth0: Media 10baseT has no link beat, 80c0. Oct 29 18:40:07 obelix kernel: eth0: Media selection failing, using default 100baseTX port. Oct 29 18:40:07 obelix kernel: wrote 0x00400000 to Wn3_Config Oct 29 18:40:07 obelix kernel: eth0: Media selection timer finished, 100baseTX. Oct 29 18:41:07 obelix kernel: eth0: Media selection timer tick happened, 100baseTX. Oct 29 18:41:07 obelix kernel: dev->watchdog_timeo=500 Oct 29 18:41:07 obelix kernel: eth0: Media 100baseTX has no link beat, 8080. Oct 29 18:41:07 obelix kernel: eth0: Media selection failed, now trying 10baseT port. Oct 29 18:41:07 obelix kernel: wrote 0x00000000 to Wn3_Config Oct 29 18:41:07 obelix kernel: eth0: Media selection timer finished, 10baseT. Oct 29 18:41:08 obelix kernel: eth0: Media selection timer tick happened, 10baseT. Oct 29 18:41:08 obelix kernel: dev->watchdog_timeo=500 Oct 29 18:41:08 obelix kernel: eth0: Media 10baseT has no link beat, 80c0. Oct 29 18:41:08 obelix kernel: eth0: Media selection failing, using default 100baseTX port. Oct 29 18:41:08 obelix kernel: wrote 0x00400000 to Wn3_Config Oct 29 18:41:08 obelix kernel: eth0: Media selection timer finished, 100baseTX. Oct 29 18:42:08 obelix kernel: eth0: Media selection timer tick happened, 100baseTX. Oct 29 18:42:08 obelix kernel: dev->watchdog_timeo=500 Oct 29 18:42:08 obelix kernel: eth0: Media 100baseTX has no link beat, 8080. Oct 29 18:42:08 obelix kernel: eth0: Media selection failed, now trying 10baseT port. Oct 29 18:42:08 obelix kernel: wrote 0x00000000 to Wn3_Config Oct 29 18:42:08 obelix kernel: eth0: Media selection timer finished, 10baseT. Oct 29 18:42:10 obelix kernel: eth0: Media selection timer tick happened, 10baseT. Oct 29 18:42:10 obelix kernel: dev->watchdog_timeo=500 Oct 29 18:42:10 obelix kernel: eth0: Media 10baseT has no link beat, 80c0. Oct 29 18:42:10 obelix kernel: eth0: Media selection failing, using default 100baseTX port. Oct 29 18:42:10 obelix kernel: wrote 0x00400000 to Wn3_Config Oct 29 18:42:10 obelix kernel: eth0: Media selection timer finished, 100baseTX.
Oct 29 19:01:32 obelix kernel: eth0: interrupt, status e201, latency 3 ticks. Oct 29 19:01:32 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:32 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:32 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:32 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:32 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:32 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:32 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:32 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:32 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:32 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:32 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:32 obelix kernel: eth0: interrupt, status e201, latency 3 ticks. Oct 29 19:01:32 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:32 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:32 obelix kernel: eth0: interrupt, status e201, latency 3 ticks. Oct 29 19:01:32 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:32 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:34 obelix kernel: eth0: interrupt, status e201, latency 3 ticks. Oct 29 19:01:34 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:34 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:34 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:34 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:34 obelix kernel: eth0: In interrupt loop, status e081. Oct 29 19:01:34 obelix kernel: eth0: vortex_error(), status=0xe081 Oct 29 19:01:34 obelix kernel: eth0: Updating stats. Oct 29 19:01:34 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:34 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:34 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:34 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:34 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:34 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:34 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:34 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:34 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:34 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:34 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:34 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:34 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:34 obelix kernel: eth0: interrupt, status e201, latency 1 ticks. Oct 29 19:01:34 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:34 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:34 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:34 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:34 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:34 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:34 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:34 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:34 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:34 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:34 obelix kernel: eth0: In interrupt loop, status e081. Oct 29 19:01:34 obelix kernel: eth0: vortex_error(), status=0xe081 Oct 29 19:01:34 obelix kernel: eth0: Updating stats. Oct 29 19:01:34 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:35 obelix kernel: eth0: Media selection timer tick happened, 100baseTX. Oct 29 19:01:35 obelix kernel: dev->watchdog_timeo=500 Oct 29 19:01:35 obelix kernel: eth0: Media 100baseTX has no link beat, 8080. Oct 29 19:01:35 obelix kernel: eth0: Media selection failed, now trying 10baseT port. Oct 29 19:01:35 obelix kernel: wrote 0x00000000 to Wn3_Config Oct 29 19:01:35 obelix kernel: eth0: Media selection timer finished, 10baseT. Oct 29 19:01:36 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:36 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:36 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:36 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. ct 29 19:01:36 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:36 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:36 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:36 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:36 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:36 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:36 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:36 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:36 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:36 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:36 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:36 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:36 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:36 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:36 obelix kernel: eth0: Media selection timer tick happened, 10baseT. Oct 29 19:01:36 obelix kernel: dev->watchdog_timeo=500 Oct 29 19:01:36 obelix kernel: eth0: Media 10baseT has no link beat, 80c0. Oct 29 19:01:36 obelix kernel: eth0: Media selection failing, using default 100baseTX port. Oct 29 19:01:36 obelix kernel: wrote 0x00400000 to Wn3_Config Oct 29 19:01:36 obelix kernel: eth0: Media selection timer finished, 100baseTX. Oct 29 19:01:39 obelix kernel: eth0: interrupt, status e201, latency 3 ticks. Oct 29 19:01:39 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:39 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:39 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:41 obelix kernel: eth0: interrupt, status e201, latency 2 ticks. Oct 29 19:01:41 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:41 obelix kernel: eth0: exiting interrupt, status e000. Oct 29 19:01:43 obelix kernel: eth0: interrupt, status e201, latency 3 ticks. Oct 29 19:01:43 obelix kernel: eth0: In interrupt loop, status e201. Oct 29 19:01:43 obelix kernel: eth0: In interrupt loop, status e081. Oct 29 19:01:43 obelix kernel: eth0: vortex_error(), status=0xe081 Oct 29 19:01:43 obelix kernel: eth0: Updating stats. Oct 29 19:01:43 obelix kernel: eth0: exiting interrupt, status e000.
vortex-diag.c:v2.05 5/15/2001 Donald Becker (becker@scyld.com) http://www.scyld.com/diag/index.html Index #1: Found a 3c905B Cyclone 100baseTx adapter at 0xd000. The Vortex chip may be active, so FIFO registers will not be read. To see all register values use the '-f' flag. Initial window 7, registers values by window: Window 0: 0000 0000 0000 0000 f5f5 00bf 0000 0000. Window 1: FIFO FIFO 0000 0000 0000 0000 0000 2000. Window 2: a000 5024 e726 0000 0000 0000 000a 4000. Window 3: 0000 0040 05ea 0000 000a 0800 0800 6000. Window 4: 0000 0000 0000 0cd2 0000 8080 0000 8000. Window 5: 1ffc 0000 0000 0600 0807 06ce 06c6 a000. Window 6: 0000 0000 0000 0000 0000 0000 0000 c000. Window 7: 0000 0000 0000 0000 0000 0000 0000 e000. Vortex chip registers at 0xd000 0xD010: **FIFO** 00000000 00000000 *STATUS* 0xD020: 00000020 00000000 00080000 00000004 0xD030: 00000000 d24c2db4 0dde4000 00080004 Indication enable is 06c6, interrupt enable is 06ce. No interrupt sources are pending. Transceiver/media interfaces available: 100baseTx 10baseT. Transceiver type in use: 100baseTX. MAC settings: half-duplex. Station address set to 00:a0:24:50:26:e7. Configuration options 000a. EEPROM contents (64 words, offset 0): 0x000: 00a0 2450 26e7 9055 c494 0036 4b4e 6d50 0x008: 2971 0001 00a0 2450 26e7 0010 0000 002a 0x010: 32a6 0000 0000 0040 0000 0003 0000 10b7 0x018: 9055 000a 0000 0000 0000 0000 0000 0000 0x020: 0047 0000 0000 0000 0000 0000 0000 0000 0x028: 0000 0000 0000 0000 0000 0000 0000 0000 0x030: 0000 0000 0000 0000 0000 0000 0000 0000 0x038: 0000 0000 0000 0000 0000 0000 0000 0000 The word-wide EEPROM checksum is 0xa35d. Saved EEPROM settings of a 3Com Vortex/Boomerang: 3Com Node Address 00:A0:24:50:26:E7 (used as a unique ID only). OEM Station address 00:A0:24:50:26:E7 (used as the ethernet address). Manufacture date (MM/DD/YYYY) 4/20/1998, division 6, product NK. Options: negotiated duplex, link beat required. Vortex format checksum is incorrect (002f vs. 10b7). Cyclone format checksum is correct (0x47 vs. 0x47). Hurricane format checksum is correct (0x47 vs. 0x47).
mii-diag.c:v2.02 5/21/2001 Donald Becker (becker@scyld.com) http://www.scyld.com/diag/index.html The autonegotiated capability is 0000. No common media type was autonegotiated! This is extremely unusual and typically indicates a configuration error. Perhaps the advertised capability set was intentionally limited. Basic mode control register 0xc000: Auto-negotiation disabled, with Speed fixed at 10 mbps, half-duplex. Transceiver in loopback mode! Transceiver currently being reset! Basic mode status register 0xc000 ... c000. Link status: not established. This transceiver is capable of 100baseT4 100baseTx-FD. Unable to perform Auto-negotiation, negotiation not complete. Your link partner advertised c000:. End of basic transceiver information. MII PHY #0 transceiver registers: c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000 c000. Basic mode control register 0xc000: Auto-negotiation disabled! Speed fixed at 10 mbps, half-duplex. Transceiver currently being reset! Transceiver in loopback mode! Basic mode status register 0xc000 ... c000. Link status: not established. Capable of 100baseT4 100baseTx-FD. Unable to perform Auto-negotiation, negotiation not complete. This transceiver has no vendor identification. I'm advertising c000: Advertising additional info pages. Using an unknown (non 802.3) encapsulation. Link partner capability is c000:. Negotiation completed.
