My sincere apologies.... My preblem is specifically with the version of the tulip driver that comes with the 2.4.3/4 kernel, it MAY be with my hardware only, however I have experienced similar problems with many 21143 based cards in the past while 21140 based cards worked.. I notice that the version number of the kernel driver is in a different sequence to that at ftp.Scyld.com and I am unsure if I should wait for them to be syncronised or worry about what I should do to swap one for the other. It was suggested on this list that I should use the 92t driver but I checked the existing driver and as well as being in a different sequence it states in it's documentation that it is "merged from" that 92t driver. Perhaps you can advise me how to procede since it doesn't seem clear.... On Tue, 19 Jun 2001, Donald Becker wrote: > On Tue, 19 Jun 2001, A James Lewis wrote: > > Cc: tulip@scyld.com, linux-net@vger.kernel.org > > Subject: Re: [tulip] Most ethernets record? > > > > > > Did this work properly since I tried Znyx 4 port tulip cards and they sort > > of work but there's loads of collisions and poor performance. It works > > with SUN QFE cards though so I guess theres a problem in the tulip driver. > > Please don't make a general claim that "there's a problem with the tulip > driver". > > The Tulip driver from ftp.Scyld.com works fine with all Znyx cards we > have available for testing, and has for several years. > > > Donald Becker becker@scyld.com > Scyld Computing Corporation http://www.scyld.com > 410 Severn Ave. Suite 210 Second Generation Beowulf Clusters > Annapolis MD 21403 410-990-9993 > A. James Lewis (james@fsck.co.uk) Open Source Specialists http://www.entora.co.uk/ Tel: +44 (0)701 0723686 Fax: +44 (0)870 3214368 - : send the line "unsubscribe linux-net" in the body of a message to majordomo@vger.kernel.org
