Re: RTL8139 difficulties in 2.2, not in 2.4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 20 May 2001, Matthias Andree wrote:

> > > eth1: Transmit timeout, status 0c 0005 media 18.

It looks like I found a workaround which may help you debugging, if new
questions arise, please ask. Willing to help so this issue can be
resolved for Linux 2.2.20.

1. I'm compiling my eth drivers as modules.

2. I alias eth0 to 3c59x and eth1 to either 8139too or rtl8139 (doesn't
matter); my rtl8139 is the current version 1.13 from scyld.com

3. after X has come up, I issue "ifconfig eth1 down; rmmod rtl8139" (or
8139too, depending on what modules.conf says)

4. I do "ifconfig eth1 up" (pppoe with Deutsche Telekom AG doesn't
require IP, just raw ethernet)

5. I launch pppd which runs pppoe, the problems are gone.

I haven't yet checked if after this procedure, 3D graphics work out, I
don't have current NVidia drivers here, just plain XFree 4.0.3 as
packaged by SuSE.
-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org


[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux