Hi, all, I have a linux box, RedHat Linux 6.2 (2.2.14), which is upgraded form RedHat LInux 6.0 (2.2.5). After the upgrade, I install the second Network card and modify the conf.modules and the two cards work correctly. The two cards are: First One) D-Link DE-220 (Non-PnP Mode) io=0x280 irq=11 Second One) NE2000 compatible io=0x300 irq=10 Both use ne drivers But when after my own kernel of 2.2.14 with ne2000 support in the kernel, the new kernel both the two network card don't work, it find the first card at io=300 and irq=3 and fail to recognize the second one. (I enable loadable module in kernel configuration). The strange thing is if I remove the second card from the box, the first card works again (io=0x280 irq=11) in my new kernel. Anyone has some hints about this? Thanks in advance! wei ============================================================ Wei Qu Graduate Student, Research Assistant Faculty of Computer Science, Dalhousie University E_Mail: wei@cs.dal.ca Home : http://www.cs.dal.ca/~wei/ ************************************************************ May you have warm words on the cold evening, a full moon on the dark night, and a smooth road all the way to your door. ============================================================ - : send the line "unsubscribe linux-net" in the body of a message to majordomo@vger.kernel.org
