Routing & IPChains problem.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Greetings All,
	After upgrading from kernel 2.0.38 w/ slackware-3.4 to
kernel 2.2.16 w/ slackware-7.1 I have developed the following
routing problems.

Hardware -
	eth0 - 10meg on net 192.168.0.0 i/f 192.168.0.1 subnet 
255.255.255.128
	eth1 - 100meg on net 192.168.0.128 i/f 192.168.0.130 subnet 
255.255.255.128

>From either network I can use ipchains and surf/telnet/ftp/... on 
each network to the ppp0 dialup connection. I cannot ping or 
anything from eth0 to eth1 or back.

---------Route with ppp0 up----------------
Destination     Gateway         Genmask         Flags Metric Ref    
Use Iface
205.243.155.100 0.0.0.0         255.255.255.255 UH    0      0        0 
ppp0
192.168.0.0     0.0.0.0         255.255.255.128 U     0      0        0 
eth1
192.168.0.128   0.0.0.0         255.255.255.128 U     0      0        0 
eth0
192.168.0.0     192.168.0.1     255.255.255.0   UG    0      0        0 
eth1
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         205.243.155.100 0.0.0.0         UG    0      0        0 
ppp0
0.0.0.0         192.168.0.1     0.0.0.0         UG    0      0        0 eth1
0.0.0.0         192.168.0.130   0.0.0.0         UG    0      0        0 eth0
-------------------End of Route Table------------------

TIA - if other files are needed, I can forward.

Best - Andy

Andrew B. Cramer - <andrew.cramer@cramer-ts.com>
Cramer Technical Services - <www.cramer-ts.com>
Linux Resource Exchange - <www.linuxrx.com>
-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org


[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux