I am having a tough time with a RH6.2 system's routing tables. We have 2 gateways to the internet, and I am only defining one default route. I am dealing with 3 networks, ISP1, ISP2, and a private network. On a RH7 machine, using the ISP1 gateway, I can telnet in from outside to either ip address and be just fine. On the RH6.2 machine, ISP2 is the default gw, and I don't get any response pinging or trying to telnet to it's card on ISP1's network. Here are the routing tables: 7.0box: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 63.230.15.176 0.0.0.0 255.255.255.248 U 0 0 0 eth2 207.224.221.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 207.224.221.52 0.0.0.0 UG 0 0 0 eth0 6.2 box Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 63.230.15.176 0.0.0.0 255.255.255.248 U 0 0 0 eth2 207.224.221.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 63.230.15.182 0.0.0.0 UG 0 0 0 eth2 Any ideas? Thanks in advance for your attention to this. Jacob Anawalt, anawaltaj@qwest.net - : send the line "unsubscribe linux-net" in the body of a message to majordomo@vger.kernel.org
