Please CC me on any replies, I am not on the list.
1. Connection timeouts when hitting certain sites with linux2.4
2. Using kernels test9 and the pre's to test10, I have this problem
where some sites will not start a connection with me. Some sites are
www.amazon.com www.fool.com www.sharkyextreme.com. Other sites like
yahoo continue to work fine. Tcpdump seems to indicate that I never
get any packets from from those sites. I am behind a freeBSD NAT box.
All the other machines behind the box (Windows NT, Windows 2k, linux 2.2)
do not seem to have these problems. I have also tried to use a Solaris 2.6 box
with ipfilter as the NAT. I also have the same problems. When I do
revert to the standard RedHat kernel it will work again. I would try it in front
of the NAT but this is an office environment that I can't screw around with
it too much.
3. Networking, kernel
4. Linux version 2.4.0-test10 (root@dragon.aleia.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #5 SMP Fri Oct 27 16:59:10 PDT 2000
5. N/A
6. use netcat or a browser to hit amazon
7. Redhat 6.2 mostly with kernel upgrades
7.1. -- Versions installed: (if some fields are empty or look
-- unusual then possibly you have very old versions)
Linux dragon.aleia.com 2.4.0-test10 #5 SMP Fri Oct 27 16:59:10 PDT 2000 i686 unknown
Kernel modules 2.3.10-pre1
Gnu C egcs-2.91.66
Gnu Make 3.78.1
Binutils 2.9.5.0.22
Linux C Library 2.1.3
Dynamic linker ldd (GNU libc) 2.1.3
Procps 2.0.6
Mount 2.10f
Net-tools 1.54
Console-tools 0.3.3
Sh-utils 2.0
Modules Loaded
7.2.
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 497.000438
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr xmm
bogomips : 992.87
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 497.000438
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr xmm
bogomips : 992.87
7.3.
7.4.
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0c00-0c3f : Intel Corporation 82371AB PIIX4 ACPI
0c00-0c03 : acpi
0c04-0c05 : acpi
0c08-0c0b : acpi
0c0c-0c0f : acpi
0cf8-0cff : PCI conf1
1000-100f : Intel Corporation 82371AB PIIX4 IDE
1040-105f : Intel Corporation 82371AB PIIX4 ACPI
1060-107f : Intel Corporation 82371AB PIIX4 USB
1060-107f : usb-uhci
1080-10bf : Intel Corporation 82557 [Ethernet Pro 100]
1080-10bf : eepro100
1400-14ff : ATI Technologies Inc 3D Rage Pro 215GP
1800-18ff : Adaptec 7896
1800-18fe : aic7xxx
2000-20ff : Adaptec 7896 (#2)
2000-20fe : aic7xxx
3000-3fff : PCI Bus #01
3000-3fff : PCI Bus #02
3000-303f : Ensoniq ES1371 [AudioPCI-97]
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cd7ff : Extension ROM
000cd800-000cdfff : Extension ROM
000f0000-000fffff : System ROM
00100000-17feffff : System RAM
00100000-002b3aaf : Kernel code
002b3ab0-002cccff : Kernel data
17ff0000-17ffefff : ACPI Tables
17fff000-17ffffff : ACPI Non-volatile Storage
f4000000-f40fffff : Intel Corporation 82557 [Ethernet Pro 100]
f4100000-f4100fff : ATI Technologies Inc 3D Rage Pro 215GP
f4101000-f4101fff : Adaptec 7896
f4102000-f4102fff : Adaptec 7896 (#2)
f4103000-f4103fff : Intel Corporation 82557 [Ethernet Pro 100]
f4103000-f4103fff : eepro100
f4104000-f4104fff : Cirrus Logic GD 5480
f5000000-f5ffffff : ATI Technologies Inc 3D Rage Pro 215GP
f6000000-f7ffffff : Cirrus Logic GD 5480
f8000000-fbffffff : Intel Corporation 440GX - 82443GX Host bridge
fec00000-fec0ffff : reserved
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
7.5.
00:00.0 Host bridge: Intel Corporation 440GX - 82443GX Host bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64 set
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 440GX - 82443GX AGP bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Bus: primary=00, secondary=01, subordinate=02, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B+
00:09.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 8 min, 64 set, cache line size 08
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f5000000 (32-bit, prefetchable) [size=16M]
Region 1: I/O ports at 1400 [size=256]
Region 2: Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
00:0c.0 SCSI storage controller: Adaptec 7896
Subsystem: Adaptec: Unknown device 080f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 39 min, 25 max, 64 set, cache line size 08
Interrupt: pin A routed to IRQ 19
BIST result: 00
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at f4101000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.1 SCSI storage controller: Adaptec 7896
Subsystem: Adaptec: Unknown device 080f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 39 min, 25 max, 64 set, cache line size 08
Interrupt: pin A routed to IRQ 19
BIST result: 00
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at f4102000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
Subsystem: Intel Corporation 82559 Fast Ethernet LAN on Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 8 min, 56 max, 64 set, cache line size 08
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f4103000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 1080 [size=64]
Region 2: Memory at f4000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- AuxPwr- DSI+ D1+ D2+ PME+
Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
00:12.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 set
00:12.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Region 4: I/O ports at 1000 [size=16]
00:12.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Interrupt: pin D routed to IRQ 21
Region 4: I/O ports at 1060 [size=32]
00:12.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:14.0 VGA compatible controller: Cirrus Logic GD 5480 (rev 23) (prog-if 00 [VGA])
Subsystem: Intel Corporation: Unknown device 3430
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 2 min, 10 max, 64 set
Region 0: Memory at f6000000 (32-bit, prefetchable) [disabled] [size=32M]
Region 1: Memory at f4104000 (32-bit, non-prefetchable) [disabled] [size=4K]
Expansion ROM at <unassigned> [disabled] [size=32K]
01:0f.0 PCI bridge: Digital Equipment Corporation: Unknown device 0023 (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B+
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 240 set, cache line size 08
Bus: primary=01, secondary=02, subordinate=02, sec-latency=68
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:07.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
Subsystem: Ensoniq: Unknown device 1371
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 12 min, 128 max, 208 set
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 3000 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- AuxPwr+ DSI+ D1- D2+ PME+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
7.6.
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DMVS09V Rev: 0100
Type: Direct-Access ANSI SCSI revision: 03
-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org
