On Wed, 06 Sep 2000, you wrote: > Guido Trentalancia schrieb: > > Hello Guido, > > > >Hi ! > > >This is a bug reporting, included are the output of various /proc file > > > on my system: > > >Motherboard: ASUS P2B-F with the latest bios bx2f113.awd (microcode > > > update) ISDN: Winbond based card (Hisax type=36) > > >Distribution: based on updated SuSE 6.4 > > > > > >The problem is that if I compile the kernel (2.4.0-test8 > > > pre1,pre2,pre3,pre4) with both ACPI support and ISDN support there is a > > > conflict in irq 9. I think ACPI first get irq 9 and then Hisax can't > > > get it. Consequentially Hisax doesn't work if ACPI support is enabled. > > >With ACPI turned off, everything works fine as with previous kernel > > > test6 and test5 and .... > > >Many thanx. > > > > after further testing the problem seems to be in IRQ SHARING. > > in fact, with acpi disabled, once the hisax has got irq 9 (it is not > > possible for card type 36 to change the irq), i can load the ethernet > > modules 8390 and ne2k-pci for my ethernet PCI NE2000 card, but the > > ne2k-pci driver also set its irq=9, so everytime i try to do: > > > > ifconfig eth0 up > > > > i get: > > > > SIOCSIFFLAGS: resource temporarily unavailable > > > > why don't add the irq parameter to the hisax winbond driver and to the > > ne2k-pci driver ? > > there is no need or even sense to add such parameter, as irqs are > assigned by the bios or OS for PCI type cards. The driver is supplied > with the selected irq which is normally assigned during boot by the > systems bios. > You should change the bios PCI/Pnp setup to reflect your needs. > I don't know if the Winbond driver supports IRQ-sharing, but other i4l > drivers like the HFC-PCI which I maintain allow irq sharing without any > problems even if 3 cards share it. > So please setup your bios correctly and everything will work fine. > > > p.s. > > my motherboard has pci slot 4 and slot 5 condivided and the isdn card is > > on slot 4 while ethernet on slot 5.... so one may say "change your > > motherboard", but everything worked fine with previous kernels (ACPI, > > Hisax, ethernet).... > > > > Please help me. > > Many thanx. > > Please answer only via email: guido.trentalancia@tin.it > > -- > > bye, > > Guido Trentalancia > > Werner the problems seems to be in the winbond driver (driver/isdn/hisax/w6692.[ch]) i tried to contact the author but the email address doen't exists anymore (petr.novac@i.cz) could you help me ? ACPI and NE2000 seems to be ok... many thanx. -- -- bye, Guido Trentalancia please reply via email p.s. use gnupg ! ftp://ftp.gnupg.org
Attachment:
public_key.asc
Description: use gnupg !...
