Re: enabling UDP ports for netmeeting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon Aug 14 2000 at 21:13, "Pat Grogan" wrote:

> Content-Type: text/html;
> 	charset="iso-8859-1"
> Content-Transfer-Encoding: quoted-printable

Please, this is email, not the web.  Turn off text/html and
quoted-UNprintable in your brain-dead outrage excess mailer.

> ------=_NextPart_000_0027_01C00634.6D304580
> Content-Type: text/plain;
> 	charset="iso-8859-1"
> Content-Transfer-Encoding: quoted-printable
> 
> I am trying to enable UDP ports so that netmeeting will allow packets to =
> pass throught my firewalling. I have downloaded and applied ipchains =
> 1.3.8-1. I got the following commands that another server uses to allow =
> netwmeeting to run fine:
> 
> echo "Starting IPCHAINS for UDP"
> /sbin/ipchains -P forward DENY
> /sbin/ipchains -A forward -j MASQ -s 10.0.0.0/24 -d 0.0.0.0/0
> 
> However when I run the first ipchains command I get the following =
> message:
> 
> [root@bella1 /root]# /sbin/ipchains -P forward DENY
> ipchains: Protocol not available
> 
> I no networking guru and would appreciate some assistance. Thanks in =
> advance.

Turn on routing in the kernel...

	echo 1 > /proc/sys/net/ipv4/ip_forward

Cheers
Tony
-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.rutgers.edu


[Index of Archives]     [Netdev]     [Ethernet Bridging]     [Linux 802.1Q VLAN]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Git]     [Bugtraq]     [Yosemite News and Information]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux PCI]     [Linux Admin]     [Samba]

  Powered by Linux