This is taken from the Lucent Linux driver readme... if the adapter you
have is the one Lucen sells with the wavelan card then this will fix
your problem
4. Note about the IEEE 802.11 WaveLAN ISA Card
=======================================================
The swap-box that comes with the IEEE 802.11 WaveLAN ISA Card uses
(factory set default) I/O address 3E2. By default the i82365 module
of
the pcmcia package only probes at 3E0.
To read the manual page on this, type the command:
man i82365
Two possible solutions are:
1) Change the I/O address of the card. To do that see Figure C-1
"I/O Address Strapping of your ISA Card" in the "IEEE 802.11
WaveLAN,
ISA Card User's Guide".
2) Load the i82365 module with the "extra_sockets" parameter set to
1.
On a RedHat 5.2 system, put this in the file
"/etc/sysconfig/pcmcia":
PCMCIA=yes
PCIC=i82365
PCIC_OPTS="extra_sockets=1"
CORE_OPTS=
CARDMGR_OPTS=
Look in the PCMCIA-HOWTO for notes about the other distributions.
-
: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.rutgers.edu
