Jeff Garzik wrote: > > Ben Greear wrote: > > > > I've been running 8-hour+ traffic runs on RTL-8139 10/100 ethernet cards connected > > by a 10/100 etherswitch and linux-kernel 2.2.14 <-> 2.2.16. I'm using three cards in each > > machine, one for mgt, and two others for data generation/testing. > > I use the ip command to set up source-based routing policies to > > direct the ethernet traffic out over the correct port. > > Does "ifconfig ethX down ; ifconfig ethX up" fix the problem? > > If so, it's probably a bug in the rtl8139 driver... Working on solving > it, but it's not solved yet in any of the available drivers. > > Jeff Yes (think I mentioned that..) But, seeing as how UDP was still working, over the very same card, are you sure it's the card? Is there any way in particular that I can see if I'm seeing the same bug you're hunting? Anything I can do to help? Ben -- Ben Greear (greearb@candelatech.com) http://www.candelatech.com Author of ScryMUD: scry.wanfear.com 4444 (Released under GPL) http://scry.wanfear.com http://scry.wanfear.com/~greear - : send the line "unsubscribe linux-net" in the body of a message to majordomo@vger.rutgers.edu
