Re: [PATCH v6 1/8] dt-bindings: mtd: Describe Rockchip RK3xxx NAND flash controller

[Rob Herring <robh@xxxxxxxxxx>]

On Tue, Jun 09, 2020 at 03:40:18PM +0800, Yifeng Zhao wrote:
> Documentation support for Rockchip RK3xxx NAND flash controllers
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao@xxxxxxxxxxxxxx>
> ---
> 
> Changes in v6:
> - Fix some wrong define
> - Modified the definition of compatible
> 
> Changes in v5:
> - Fix some wrong define
> - Add boot-medium define
> - Remove some compatible define
> 
> Changes in v4:
> - The compatible define with rkxx_nfc
> - Add assigned-clocks
> - Fix some wrong define
> 
> Changes in v3:
> - Change the title for the dt-bindings
> 
> Changes in v2: None
> 
>  .../mtd/rockchip,nand-controller.yaml         | 154 ++++++++++++++++++
>  1 file changed, 154 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
> new file mode 100644
> index 000000000000..f753fe8248aa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
> @@ -0,0 +1,154 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/rockchip,nand-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip SoCs NAND FLASH Controller (NFC)
> +
> +allOf:
> +  - $ref: "nand-controller.yaml#"
> +
> +maintainers:
> +  - Heiko Stuebner <heiko@xxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: rockchip,px30-nfc
> +      - const: rockchip,rk2928-nfc
> +      - const: rockchip,rv1108-nfc
> +      - items:
> +          - const: rockchip,rk3326-nfc
> +          - const: rockchip,px30-nfc
> +      - items:
> +          - const: rockchip,rk3036-nfc
> +          - const: rockchip,rk2928-nfc
> +      - items:
> +          - const: rockchip,rk3308-nfc
> +          - const: rockchip,rv1108-nfc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 1
> +    items:
> +      - description: Bus Clock
> +      - description: Module Clock
> +
> +  clock-names:
> +    minItems: 1
> +    items:
> +      - const: ahb
> +      - const: nfc
> +
> +  assigned-clocks:
> +    maxItems: 1
> +
> +  assigned-clock-rates:
> +    maxItems: 1
> +
> +  pinctrl-0:
> +    maxItems: 1
> +
> +  pinctrl-names:
> +    const: default
> +
> +  power-domains:
> +     maxItems: 1
> +
> +patternProperties:
> +  "^nand@[a-f0-9]$":
> +    type: object
> +    properties:
> +      reg:
> +        minimum: 0
> +        maximum: 7
> +
> +      nand-ecc-mode:
> +        const: hw
> +
> +      nand-ecc-step-size:
> +        const: 1024
> +
> +      nand-ecc-strength:
> +        enum: [16, 24, 40, 60, 70]
> +        description:

This needs a '|' at the end if you want the below line breaks preserved.

> +          The ECC configurations that can be supported are as follows.
> +          - NFCv900(PX30 and RK3326) support ecc strength 16, 40, 60 and 70.
> +          - NFCv600(RK3066 and RK2928) support ecc strength 16, 24, 40 and 60.
> +          - NFCv622(RK3036 and RK3128) support ecc strength 16, 24, 40 and 60.
> +          - NFCv800(RK3308 and RV1108) support ecc strength 16.
> +
> +      nand-bus-width:
> +        const: 8
> +
> +      rockchip,boot-blks:
> +        minimum: 2
> +        default: 16
> +        allOf:
> +        - $ref: /schemas/types.yaml#/definitions/uint32
> +        description:
> +          The NFC driver need this information to select ECC
> +          algorithms supported by the BOOTROM.
> +          Only used in combination with 'nand-is-boot-medium'.
> +
> +      rockchip,boot-ecc-strength:
> +        enum: [16, 24, 40, 60, 70]
> +        allOf:
> +        - $ref: /schemas/types.yaml#/definitions/uint32
> +        description:
> +          If specified it indicates that a different BCH/ECC setting is
> +          supported by the BOOTROM.
> +          - NFCv900(PX30 and RK3326) support ecc strength 16 and 70.
> +          - NFCv600(RK3066 and RK2928) support ecc strength 16, 24, 40 and 60.
> +          - NFCv622(RK3036 and RK3128) support ecc strength 16, 24, 40 and 60.
> +          - NFCv800(RK3308 and RV1108) support ecc strength 16.
> +          Only used in combination with 'nand-is-boot-medium'.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/rk3308-cru.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    nfc: nand-controller@ff4b0000 {
> +      compatible = "rockchip,rk3308-nfc",
> +                   "rockchip,rv1108-nfc";
> +      reg = <0x0 0xff4b0000 0x0 0x4000>;
> +      interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
> +      clock-names = "ahb", "nfc";
> +      assigned-clocks = <&clks SCLK_NANDC>;
> +      assigned-clock-rates = <150000000>;
> +
> +      pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0
> +                   &flash_rdn &flash_rdy &flash_wrn>;
> +      pinctrl-names = "default";
> +
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      nand@0 {
> +        reg = <0>;
> +        label = "rk-nand";
> +        nand-bus-width = <8>;
> +        nand-ecc-mode = "hw";
> +        nand-ecc-step-size = <1024>;
> +        nand-ecc-strength = <16>;
> +        nand-is-boot-medium;
> +        rockchip,boot-blks = <8>;
> +        rockchip,boot-ecc-strength = <16>;
> +      };
> +    };
> +
> +...
> -- 
> 2.17.1
> 
> 
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/