[PATCH v2 1/2] mtd: rawnand: brcmnand: Don't default to edu transfer

[Kamal Dasu <kdasu.kdev@xxxxxxxxx>]

When flash-dma is absent do not default to using flash-edu.
Make sure flash-edu is enabled before setting EDU transfer
function.

Fixes: a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers")
Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
---
 drivers/mtd/nand/raw/brcmnand/brcmnand.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 8f9ffb46a09f..0c1d6e543586 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2953,8 +2953,9 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
 		if (ret < 0)
 			goto err;
 
-		/* set edu transfer function to call */
-		ctrl->dma_trans = brcmnand_edu_trans;
+		if (has_edu(ctrl))
+			/* set edu transfer function to call */
+			ctrl->dma_trans = brcmnand_edu_trans;
 	}
 
 	/* Disable automatic device ID config, direct addressing */
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/