Re: [PATCH 1/2] mtd: rawnand: brcmnand: Don't default to edu transfer

[Miquel Raynal <miquel.raynal@xxxxxxxxxxx>]

Hi Kamal,

Kamal Dasu <kdasu.kdev@xxxxxxxxx> wrote on Thu, 11 Jun 2020 11:22:56
-0400:

> On Thu, Jun 11, 2020 at 3:16 AM Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:
> >
> > Hi Kamal,
> >
> > Kamal Dasu <kdasu.kdev@xxxxxxxxx> wrote on Thu, 11 Jun 2020 01:44:53
> > -0400:
> >  
> > > When flash-dma is absent do not default to using flash-edu.
> > > Make sure flash-edu is enabled before setting EDU transfer
> > > function.
> > >
> > > Fixes: a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers")
> > > Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
> > > ---
> > >  drivers/mtd/nand/raw/brcmnand/brcmnand.c | 5 +++--
> > >  1 file changed, 3 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> > > index 8f9ffb46a09f..0c1d6e543586 100644
> > > --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> > > +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
> > > @@ -2953,8 +2953,9 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
> > >               if (ret < 0)
> > >                       goto err;
> > >
> > > -             /* set edu transfer function to call */
> > > -             ctrl->dma_trans = brcmnand_edu_trans;
> > > +             if (has_edu(ctrl))
> > > +                     /* set edu transfer function to call */
> > > +                     ctrl->dma_trans = brcmnand_edu_trans;  
> >
> > Does this fallback to returning an error in case !has_edu() ? Othewise,
> > how is it handled?
> >  
> 
>  The driver will default to pio if both flash-dma and falsh-edu are
> not present.
> 
> > Thanks,
> > Miquèl  
> 
> Kamal


Ok, thanks for the clarification!

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/