Instead of accessing ->strength/step_size directly.
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
drivers/mtd/nand/raw/atmel/nand-controller.c | 10 +++--
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 8 ++--
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 13 +++---
drivers/mtd/nand/raw/marvell_nand.c | 8 ++--
drivers/mtd/nand/raw/mtk_nand.c | 6 ++-
drivers/mtd/nand/raw/nand_base.c | 27 +++++++-----
drivers/mtd/nand/raw/nand_esmt.c | 15 ++++---
drivers/mtd/nand/raw/nand_hynix.c | 44 +++++++++++---------
drivers/mtd/nand/raw/nand_jedec.c | 9 +++-
drivers/mtd/nand/raw/nand_micron.c | 17 +++++---
drivers/mtd/nand/raw/nand_onfi.c | 17 ++++++--
drivers/mtd/nand/raw/nand_samsung.c | 22 ++++++----
drivers/mtd/nand/raw/nand_toshiba.c | 14 ++++---
drivers/mtd/nand/raw/sunxi_nand.c | 6 ++-
drivers/mtd/nand/raw/tegra_nand.c | 12 ++++--
drivers/mtd/nand/spi/core.c | 2 +-
16 files changed, 144 insertions(+), 86 deletions(-)
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 85cf396731ce..3fba91d7991a 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1043,6 +1043,8 @@ static int atmel_hsmc_nand_pmecc_read_page_raw(struct nand_chip *chip,
static int atmel_nand_pmecc_init(struct nand_chip *chip)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct mtd_info *mtd = nand_to_mtd(chip);
struct atmel_nand *nand = to_atmel_nand(chip);
struct atmel_nand_controller *nc;
@@ -1072,15 +1074,15 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
else if (chip->ecc.strength)
req.ecc.strength = chip->ecc.strength;
- else if (chip->base.eccreq.strength)
- req.ecc.strength = chip->base.eccreq.strength;
+ else if (requirements->strength)
+ req.ecc.strength = requirements->strength;
else
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
if (chip->ecc.size)
req.ecc.sectorsize = chip->ecc.size;
- else if (chip->base.eccreq.step_size)
- req.ecc.sectorsize = chip->base.eccreq.step_size;
+ else if (requirements->step_size)
+ req.ecc.sectorsize = requirements->step_size;
else
req.ecc.sectorsize = ATMEL_PMECC_SECTOR_SIZE_AUTO;
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 164617b33942..a774247b0caa 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2506,6 +2506,8 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
{
struct mtd_info *mtd = nand_to_mtd(&host->chip);
struct nand_chip *chip = &host->chip;
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct brcmnand_controller *ctrl = host->ctrl;
struct brcmnand_cfg *cfg = &host->hwcfg;
char msg[128];
@@ -2563,10 +2565,10 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
(!chip->ecc.size || !chip->ecc.strength)) {
- if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
+ if (requirements->step_size && requirements->strength) {
/* use detected ECC parameters */
- chip->ecc.size = chip->base.eccreq.step_size;
- chip->ecc.strength = chip->base.eccreq.strength;
+ chip->ecc.size = requirements->step_size;
+ chip->ecc.strength = requirements->strength;
dev_info(ctrl->dev, "Using ECC step-size %d, strength %d\n",
chip->ecc.size, chip->ecc.strength);
}
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index d1ea6df9fd64..2bdcbc3197f7 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -272,8 +272,8 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this,
default:
dev_err(this->dev,
"unsupported nand chip. ecc bits : %d, ecc size : %d\n",
- chip->base.eccreq.strength,
- chip->base.eccreq.step_size);
+ nanddev_get_ecc_requirements(&chip->base)->strength,
+ nanddev_get_ecc_requirements(&chip->base)->step_size);
return -EINVAL;
}
geo->ecc_chunk_size = ecc_step;
@@ -509,6 +509,8 @@ static int legacy_set_geometry(struct gpmi_nand_data *this)
static int common_nfc_set_geometry(struct gpmi_nand_data *this)
{
+ struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct nand_chip *chip = &this->nand;
if (chip->ecc.strength > 0 && chip->ecc.size > 0)
@@ -517,13 +519,12 @@ static int common_nfc_set_geometry(struct gpmi_nand_data *this)
if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc"))
|| legacy_set_geometry(this)) {
- if (!(chip->base.eccreq.strength > 0 &&
- chip->base.eccreq.step_size > 0))
+ if (!(requirements->strength > 0 && requirements->step_size > 0))
return -EINVAL;
return set_geometry_by_ecc_info(this,
- chip->base.eccreq.strength,
- chip->base.eccreq.step_size);
+ requirements->strength,
+ requirements->step_size);
}
return 0;
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index f9cc03c11deb..3ed315dd7798 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2244,14 +2244,16 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc)
{
struct nand_chip *chip = mtd_to_nand(mtd);
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
int ret;
if (ecc->engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
(!ecc->size || !ecc->strength)) {
- if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
- ecc->size = chip->base.eccreq.step_size;
- ecc->strength = chip->base.eccreq.strength;
+ if (requirements->step_size && requirements->strength) {
+ ecc->size = requirements->step_size;
+ ecc->strength = requirements->strength;
} else {
dev_info(nfc->dev,
"No minimum ECC strength, using 1b/512B\n");
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index a0294c9161dd..c7b1230110d8 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1221,6 +1221,8 @@ static int mtk_nfc_set_spare_per_sector(u32 *sps, struct mtd_info *mtd)
static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
{
struct nand_chip *nand = mtd_to_nand(mtd);
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&nand->base);
struct mtk_nfc *nfc = nand_get_controller_data(nand);
u32 spare;
int free, ret;
@@ -1234,8 +1236,8 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
/* if optional dt settings not present */
if (!nand->ecc.size || !nand->ecc.strength) {
/* use datasheet requirements */
- nand->ecc.strength = nand->base.eccreq.strength;
- nand->ecc.size = nand->base.eccreq.step_size;
+ nand->ecc.strength = requirements->strength;
+ nand->ecc.size = requirements->step_size;
/*
* align eccstrength and eccsize
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 2821c82b79ad..d22f4243d715 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -4725,6 +4725,8 @@ static inline bool is_full_id_nand(struct nand_flash_dev *type)
static bool find_full_id_nand(struct nand_chip *chip,
struct nand_flash_dev *type)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
u8 *id_data = chip->id.data;
@@ -4746,8 +4748,9 @@ static bool find_full_id_nand(struct nand_chip *chip,
memorg->pagesize *
memorg->pages_per_eraseblock);
chip->options |= type->options;
- chip->base.eccreq.strength = NAND_ECC_STRENGTH(type);
- chip->base.eccreq.step_size = NAND_ECC_STEP(type);
+ requirements.strength = NAND_ECC_STRENGTH(type);
+ requirements.step_size = NAND_ECC_STEP(type);
+ nanddev_set_ecc_requirements(base, &requirements);
chip->onfi_timing_mode_default =
type->onfi_timing_mode_default;
@@ -5449,10 +5452,12 @@ static int
nand_match_ecc_req(struct nand_chip *chip,
const struct nand_ecc_caps *caps, int oobavail)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct mtd_info *mtd = nand_to_mtd(chip);
const struct nand_ecc_step_info *stepinfo;
- int req_step = chip->base.eccreq.step_size;
- int req_strength = chip->base.eccreq.strength;
+ int req_step = requirements->step_size;
+ int req_strength = requirements->strength;
int req_corr, step_size, strength, nsteps, ecc_bytes, ecc_bytes_total;
int best_step, best_strength, best_ecc_bytes;
int best_ecc_bytes_total = INT_MAX;
@@ -5643,9 +5648,11 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
int corr, ds_corr;
- if (ecc->size == 0 || chip->base.eccreq.step_size == 0)
+ if (ecc->size == 0 || requirements->step_size == 0)
/* Not enough information */
return true;
@@ -5654,10 +5661,10 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
* the correction density.
*/
corr = (mtd->writesize * ecc->strength) / ecc->size;
- ds_corr = (mtd->writesize * chip->base.eccreq.strength) /
- chip->base.eccreq.step_size;
+ ds_corr = (mtd->writesize * requirements->strength) /
+ requirements->step_size;
- return corr >= ds_corr && ecc->strength >= chip->base.eccreq.strength;
+ return corr >= ds_corr && ecc->strength >= requirements->strength;
}
static int rawnand_erase(struct nand_device *nand, const struct nand_pos *pos)
@@ -5944,8 +5951,8 @@ static int nand_scan_tail(struct nand_chip *chip)
if (!nand_ecc_strength_good(chip))
pr_warn("WARNING: %s: the ECC used on your system (%db/%dB) is too weak compared to the one required by the NAND chip (%db/%dB)\n",
mtd->name, chip->ecc.strength, chip->ecc.size,
- chip->base.eccreq.strength,
- chip->base.eccreq.step_size);
+ nanddev_get_ecc_requirements(&chip->base)->strength,
+ nanddev_get_ecc_requirements(&chip->base)->step_size);
/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
diff --git a/drivers/mtd/nand/raw/nand_esmt.c b/drivers/mtd/nand/raw/nand_esmt.c
index 3338c68aaaf1..4412c407aef3 100644
--- a/drivers/mtd/nand/raw/nand_esmt.c
+++ b/drivers/mtd/nand/raw/nand_esmt.c
@@ -10,27 +10,32 @@
static void esmt_nand_decode_id(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
+
nand_decode_ext_id(chip);
/* Extract ECC requirements from 5th id byte. */
if (chip->id.len >= 5 && nand_is_slc(chip)) {
- chip->base.eccreq.step_size = 512;
+ requirements.step_size = 512;
switch (chip->id.data[4] & 0x3) {
case 0x0:
- chip->base.eccreq.strength = 4;
+ requirements.strength = 4;
break;
case 0x1:
- chip->base.eccreq.strength = 2;
+ requirements.strength = 2;
break;
case 0x2:
- chip->base.eccreq.strength = 1;
+ requirements.strength = 1;
break;
default:
WARN(1, "Could not get ECC info");
- chip->base.eccreq.step_size = 0;
+ requirements.step_size = 0;
break;
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static int esmt_nand_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c
index 7caedaa5b9e5..697219f1006a 100644
--- a/drivers/mtd/nand/raw/nand_hynix.c
+++ b/drivers/mtd/nand/raw/nand_hynix.c
@@ -495,34 +495,36 @@ static void hynix_nand_extract_oobsize(struct nand_chip *chip,
static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
bool valid_jedecid)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
u8 ecc_level = (chip->id.data[4] >> 4) & 0x7;
if (valid_jedecid) {
/* Reference: H27UCG8T2E datasheet */
- chip->base.eccreq.step_size = 1024;
+ requirements.step_size = 1024;
switch (ecc_level) {
case 0:
- chip->base.eccreq.step_size = 0;
- chip->base.eccreq.strength = 0;
+ requirements.step_size = 0;
+ requirements.strength = 0;
break;
case 1:
- chip->base.eccreq.strength = 4;
+ requirements.strength = 4;
break;
case 2:
- chip->base.eccreq.strength = 24;
+ requirements.strength = 24;
break;
case 3:
- chip->base.eccreq.strength = 32;
+ requirements.strength = 32;
break;
case 4:
- chip->base.eccreq.strength = 40;
+ requirements.strength = 40;
break;
case 5:
- chip->base.eccreq.strength = 50;
+ requirements.strength = 50;
break;
case 6:
- chip->base.eccreq.strength = 60;
+ requirements.strength = 60;
break;
default:
/*
@@ -543,14 +545,14 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
if (nand_tech < 3) {
/* > 26nm, reference: H27UBG8T2A datasheet */
if (ecc_level < 5) {
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1 << ecc_level;
+ requirements.step_size = 512;
+ requirements.strength = 1 << ecc_level;
} else if (ecc_level < 7) {
if (ecc_level == 5)
- chip->base.eccreq.step_size = 2048;
+ requirements.step_size = 2048;
else
- chip->base.eccreq.step_size = 1024;
- chip->base.eccreq.strength = 24;
+ requirements.step_size = 1024;
+ requirements.strength = 24;
} else {
/*
* We should never reach this case, but if that
@@ -563,18 +565,20 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
} else {
/* <= 26nm, reference: H27UBG8T2B datasheet */
if (!ecc_level) {
- chip->base.eccreq.step_size = 0;
- chip->base.eccreq.strength = 0;
+ requirements.step_size = 0;
+ requirements.strength = 0;
} else if (ecc_level < 5) {
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1 << (ecc_level - 1);
+ requirements.step_size = 512;
+ requirements.strength = 1 << (ecc_level - 1);
} else {
- chip->base.eccreq.step_size = 1024;
- chip->base.eccreq.strength = 24 +
+ requirements.step_size = 1024;
+ requirements.strength = 24 +
(8 * (ecc_level - 5));
}
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static void hynix_nand_extract_scrambling_requirements(struct nand_chip *chip,
diff --git a/drivers/mtd/nand/raw/nand_jedec.c b/drivers/mtd/nand/raw/nand_jedec.c
index b15c42f48755..85b6d9372d80 100644
--- a/drivers/mtd/nand/raw/nand_jedec.c
+++ b/drivers/mtd/nand/raw/nand_jedec.c
@@ -23,6 +23,7 @@
*/
int nand_jedec_detect(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
struct nand_jedec_params *p;
@@ -120,8 +121,12 @@ int nand_jedec_detect(struct nand_chip *chip)
ecc = &p->ecc_info[0];
if (ecc->codeword_size >= 9) {
- chip->base.eccreq.strength = ecc->ecc_bits;
- chip->base.eccreq.step_size = 1 << ecc->codeword_size;
+ struct nand_ecc_props requirements = {
+ .strength = ecc->ecc_bits,
+ .step_size = 1 << ecc->codeword_size,
+ };
+
+ nanddev_set_ecc_requirements(base, &requirements);
} else {
pr_warn("Invalid codeword size\n");
}
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index c8ebfd8c77a1..e19f992138f3 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -413,6 +413,8 @@ enum {
*/
static int micron_supports_on_die_ecc(struct nand_chip *chip)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
u8 id[5];
int ret;
@@ -425,7 +427,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
/*
* We only support on-die ECC of 4/512 or 8/512
*/
- if (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
+ if (requirements->strength != 4 && requirements->strength != 8)
return MICRON_ON_DIE_UNSUPPORTED;
/* 0x2 means on-die ECC is available. */
@@ -466,7 +468,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
/*
* We only support on-die ECC of 4/512 or 8/512
*/
- if (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
+ if (requirements->strength != 4 && requirements->strength != 8)
return MICRON_ON_DIE_UNSUPPORTED;
return MICRON_ON_DIE_SUPPORTED;
@@ -474,6 +476,9 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
static int micron_nand_init(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(base);
struct mtd_info *mtd = nand_to_mtd(chip);
struct micron_nand *micron;
int ondie;
@@ -523,7 +528,7 @@ static int micron_nand_init(struct nand_chip *chip)
* That's not needed for 8-bit ECC, because the status expose
* a better approximation of the number of bitflips in a page.
*/
- if (chip->base.eccreq.strength == 4) {
+ if (requirements->strength == 4) {
micron->ecc.rawbuf = kmalloc(mtd->writesize +
mtd->oobsize,
GFP_KERNEL);
@@ -533,16 +538,16 @@ static int micron_nand_init(struct nand_chip *chip)
}
}
- if (chip->base.eccreq.strength == 4)
+ if (requirements->strength == 4)
mtd_set_ooblayout(mtd,
µn_nand_on_die_4_ooblayout_ops);
else
mtd_set_ooblayout(mtd,
µn_nand_on_die_8_ooblayout_ops);
- chip->ecc.bytes = chip->base.eccreq.strength * 2;
+ chip->ecc.bytes = requirements->strength * 2;
chip->ecc.size = 512;
- chip->ecc.strength = chip->base.eccreq.strength;
+ chip->ecc.strength = requirements->strength;
chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
diff --git a/drivers/mtd/nand/raw/nand_onfi.c b/drivers/mtd/nand/raw/nand_onfi.c
index be3456627288..45649e03797d 100644
--- a/drivers/mtd/nand/raw/nand_onfi.c
+++ b/drivers/mtd/nand/raw/nand_onfi.c
@@ -34,6 +34,8 @@ u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
struct nand_onfi_params *p)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements;
struct onfi_ext_param_page *ep;
struct onfi_ext_section *s;
struct onfi_ext_ecc_info *ecc;
@@ -94,8 +96,10 @@ static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
goto ext_out;
}
- chip->base.eccreq.strength = ecc->ecc_bits;
- chip->base.eccreq.step_size = 1 << ecc->codeword_size;
+ requirements.strength = ecc->ecc_bits;
+ requirements.step_size = 1 << ecc->codeword_size;
+ nanddev_set_ecc_requirements(base, &requirements);
+
ret = 0;
ext_out:
@@ -139,6 +143,7 @@ static void nand_bit_wise_majority(const void **srcbufs,
*/
int nand_onfi_detect(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
struct nand_onfi_params *p = NULL, *pbuf;
@@ -265,8 +270,12 @@ int nand_onfi_detect(struct nand_chip *chip)
chip->options |= NAND_BUSWIDTH_16;
if (p->ecc_bits != 0xff) {
- chip->base.eccreq.strength = p->ecc_bits;
- chip->base.eccreq.step_size = 512;
+ struct nand_ecc_props requirements = {
+ .strength = p->ecc_bits,
+ .step_size = 512,
+ };
+
+ nanddev_set_ecc_requirements(base, &requirements);
} else if (onfi_version >= 21 &&
(le16_to_cpu(p->features) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
diff --git a/drivers/mtd/nand/raw/nand_samsung.c b/drivers/mtd/nand/raw/nand_samsung.c
index 3a4a19e808f6..0be6b7563805 100644
--- a/drivers/mtd/nand/raw/nand_samsung.c
+++ b/drivers/mtd/nand/raw/nand_samsung.c
@@ -10,6 +10,8 @@
static void samsung_nand_decode_id(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
@@ -71,23 +73,23 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
/* Extract ECC requirements from 5th id byte*/
extid = (chip->id.data[4] >> 4) & 0x07;
if (extid < 5) {
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1 << extid;
+ requirements.step_size = 512;
+ requirements.strength = 1 << extid;
} else {
- chip->base.eccreq.step_size = 1024;
+ requirements.step_size = 1024;
switch (extid) {
case 5:
- chip->base.eccreq.strength = 24;
+ requirements.strength = 24;
break;
case 6:
- chip->base.eccreq.strength = 40;
+ requirements.strength = 40;
break;
case 7:
- chip->base.eccreq.strength = 60;
+ requirements.strength = 60;
break;
default:
WARN(1, "Could not decode ECC info");
- chip->base.eccreq.step_size = 0;
+ requirements.step_size = 0;
}
}
} else {
@@ -97,8 +99,8 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
switch (chip->id.data[1]) {
/* K9F4G08U0D-S[I|C]B0(T00) */
case 0xDC:
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1;
+ requirements.step_size = 512;
+ requirements.strength = 1;
break;
/* K9F1G08U0E 21nm chips do not support subpage write */
@@ -112,6 +114,8 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
}
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static int samsung_nand_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index 436ed90a90ad..5d3434587f25 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -145,6 +145,8 @@ static void toshiba_nand_benand_init(struct nand_chip *chip)
static void toshiba_nand_decode_id(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
@@ -175,23 +177,25 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
* - 24nm: 8 bit ECC for each 512Byte is required.
*/
if (chip->id.len >= 6 && nand_is_slc(chip)) {
- chip->base.eccreq.step_size = 512;
+ requirements.step_size = 512;
switch (chip->id.data[5] & 0x7) {
case 0x4:
- chip->base.eccreq.strength = 1;
+ requirements.strength = 1;
break;
case 0x5:
- chip->base.eccreq.strength = 4;
+ requirements.strength = 4;
break;
case 0x6:
- chip->base.eccreq.strength = 8;
+ requirements.strength = 8;
break;
default:
WARN(1, "Could not get ECC info");
- chip->base.eccreq.step_size = 0;
+ requirements.step_size = 0;
break;
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static int tc58teg5dclta00_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index c6dd2e6d9ef8..490ba485e939 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1732,6 +1732,8 @@ static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
static int sunxi_nand_attach_chip(struct nand_chip *nand)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&nand->base);
struct nand_ecc_ctrl *ecc = &nand->ecc;
struct device_node *np = nand_get_flash_node(nand);
int ret;
@@ -1745,8 +1747,8 @@ static int sunxi_nand_attach_chip(struct nand_chip *nand)
nand->options |= NAND_SUBPAGE_READ;
if (!ecc->size) {
- ecc->size = nand->base.eccreq.step_size;
- ecc->strength = nand->base.eccreq.strength;
+ ecc->size = requirements->step_size;
+ ecc->strength = requirements->strength;
}
if (!ecc->size || !ecc->strength)
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index 2325b06ccc9a..fecdb7e8f9e8 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -840,6 +840,8 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
int strength_len, int bits_per_step,
int oobsize)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
bool maximize = chip->ecc.options & NAND_ECC_MAXIMIZE;
int i;
@@ -855,7 +857,7 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
} else {
strength_sel = strength[i];
- if (strength_sel < chip->base.eccreq.strength)
+ if (strength_sel < requirements->strength)
continue;
}
@@ -908,6 +910,8 @@ static int tegra_nand_select_strength(struct nand_chip *chip, int oobsize)
static int tegra_nand_attach_chip(struct nand_chip *chip)
{
struct tegra_nand_controller *ctrl = to_tegra_ctrl(chip->controller);
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct tegra_nand_chip *nand = to_tegra_chip(chip);
struct mtd_info *mtd = nand_to_mtd(chip);
int bits_per_step;
@@ -919,9 +923,9 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.steps = mtd->writesize / chip->ecc.size;
- if (chip->base.eccreq.step_size != 512) {
+ if (requirements->step_size != 512) {
dev_err(ctrl->dev, "Unsupported step size %d\n",
- chip->base.eccreq.step_size);
+ requirements->step_size);
return -EINVAL;
}
@@ -952,7 +956,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
if (ret < 0) {
dev_err(ctrl->dev,
"No valid strength found, minimum %d\n",
- chip->base.eccreq.strength);
+ requirements->strength);
return ret;
}
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 56019de28a90..0939e0f9c6a4 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -903,7 +903,7 @@ int spinand_match_and_init(struct spinand_device *spinand,
continue;
nand->memorg = table[i].memorg;
- nand->eccreq = table[i].eccreq;
+ nanddev_set_ecc_requirements(nand, &table[i].eccreq);
spinand->eccinfo = table[i].eccinfo;
spinand->flags = table[i].flags;
spinand->id.len = 1 + table[i].devid.len;
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
[PATCH v10 14/20] mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevant
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH v10 14/20] mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevant
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Date: Wed, 3 Jun 2020 19:57:53 +0200
- Cc: Mark Rutland <mark.rutland@xxxxxxx>, devicetree@xxxxxxxxxxxxxxx, Julien Su <juliensu@xxxxxxxxxxx>, Miquel Raynal <miquel.raynal@xxxxxxxxxxx>, Rob Herring <robh+dt@xxxxxxxxxx>, Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>, Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>, Mason Yang <masonccyang@xxxxxxxxxxx>, linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
- In-reply-to: <20200603175759.19948-1-miquel.raynal@bootlin.com>
- References: <20200603175759.19948-1-miquel.raynal@bootlin.com>
- References:
- [PATCH v10 00/20] Introduction of the generic ECC framework
- From: Miquel Raynal
- [PATCH v10 00/20] Introduction of the generic ECC framework
- Prev by Date: [PATCH v10 16/20] mtd: rawnand: Make use of the ECC framework
- Next by Date: [PATCH v10 15/20] mtd: nand: Use the new generic ECC object
- Previous by thread: [PATCH v10 16/20] mtd: rawnand: Make use of the ECC framework
- Next by thread: [PATCH v10 15/20] mtd: nand: Use the new generic ECC object
- Index(es):
 |