This chip supports ONFI SDR timing mode 4, implement the new hook to advertize it. Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> --- drivers/mtd/nand/raw/nand_hynix.c | 13 +++++++++++++ drivers/mtd/nand/raw/nand_ids.c | 2 +- 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c index 7d1be53f27f3..fa656bc5a918 100644 --- a/drivers/mtd/nand/raw/nand_hynix.c +++ b/drivers/mtd/nand/raw/nand_hynix.c @@ -673,6 +673,15 @@ static void hynix_nand_cleanup(struct nand_chip *chip) nand_set_manufacturer_data(chip, NULL); } +static int +h27ucg8t2atrbc_choose_interface(struct nand_chip *chip, + struct nand_interface_config *iface) +{ + onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 4); + + return nand_choose_best_sdr_timings(chip, iface, NULL); +} + static int hynix_nand_init(struct nand_chip *chip) { struct hynix_nand *hynix; @@ -689,6 +698,10 @@ static int hynix_nand_init(struct nand_chip *chip) nand_set_manufacturer_data(chip, hynix); + if (!strncmp("H27UCG8T2ATR-BC", chip->parameters.model, + sizeof("H27UCG8T2ATR-BC") - 1)) + chip->ops.choose_interface = h27ucg8t2atrbc_choose_interface; + ret = hynix_nand_rr_init(chip); if (ret) hynix_nand_cleanup(chip); diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c index c729a8bc895d..3b890d55703d 100644 --- a/drivers/mtd/nand/raw/nand_ids.c +++ b/drivers/mtd/nand/raw/nand_ids.c @@ -50,7 +50,7 @@ struct nand_flash_dev nand_flash_ids[] = { {"H27UCG8T2ATR-BC 64G 3.3V 8-bit", { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, - NAND_ECC_INFO(40, SZ_1K), 4 }, + NAND_ECC_INFO(40, SZ_1K) }, LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS), -- 2.20.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/