[PATCH] mtd: rawnand: gpmi: Fix runtime PM imbalance on error

[Dinghao Liu <dinghao.liu@xxxxxxxxxx>]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
---
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 53b00c841aec..1f2baef314c9 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -540,8 +540,10 @@ static int bch_set_geometry(struct gpmi_nand_data *this)
 		return ret;
 
 	ret = pm_runtime_get_sync(this->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(this->dev);
 		return ret;
+	}
 
 	/*
 	* Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/