Hi Boris,
This .txt file is going away, so there's no need to apply this one
patch.
I Cc'd you on the V2 of the patchset that drops this file.
-Paul
Le mer. 20 mai 2020 à 1:24, Boris Brezillon
<boris.brezillon@xxxxxxxxxxxxx> a écrit :
Let's make things consistent with other bindings and clarify the
expected active state.
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
---
Changes in v2:
* New patch
---
Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git
a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
index c02259353327..4cbe13f94564 100644
--- a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
@@ -30,7 +30,8 @@ Optional children node properties:
- nand-ecc-strength: ECC strength (max number of correctable bits).
- nand-ecc-mode: String, operation mode of the NAND ecc mode. "hw"
by default
- nand-on-flash-bbt: boolean to enable on flash bbt option, if not
present false
-- rb-gpios: GPIO specifier for the busy pin.
+- rb-gpios: GPIO specifier for the ready/busy pin. The active state
(ready)
+ should be high unless the signal is inverted.
- wp-gpios: GPIO specifier for the write protect pin.
Optional child node of NAND chip nodes:
--
2.25.4
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
