[PATCH v2 4/4] mtd: rawnand: ingenic: Convert the driver to exec_op()

[Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>]

Let's convert the driver to exec_op() to have one less driver relying
on the legacy interface.

Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
---
Changes in v2:
* Add a delay after instructions when needed
* s/cmd_offset/addr_offset/

Paul, I didn't add your T-b since this new version follows the path
you proposed for the R/B polarity inversion issue. Feel free to add
it back if it still works.
---
 .../mtd/nand/raw/ingenic/ingenic_nand_drv.c   | 139 +++++++++++-------
 1 file changed, 83 insertions(+), 56 deletions(-)

diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
index e939404e1383..3659e62829f9 100644
--- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
@@ -27,9 +27,6 @@
 
 #define DRV_NAME	"ingenic-nand"
 
-/* Command delay when there is no R/B pin. */
-#define RB_DELAY_US	100
-
 struct jz_soc_info {
 	unsigned long data_offset;
 	unsigned long addr_offset;
@@ -49,7 +46,6 @@ struct ingenic_nfc {
 	struct nand_controller controller;
 	unsigned int num_banks;
 	struct list_head chips;
-	int selected;
 	struct ingenic_nand_cs cs[];
 };
 
@@ -142,51 +138,6 @@ static const struct mtd_ooblayout_ops jz4725b_ooblayout_ops = {
 	.free = jz4725b_ooblayout_free,
 };
 
-static void ingenic_nand_select_chip(struct nand_chip *chip, int chipnr)
-{
-	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
-	struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
-	struct ingenic_nand_cs *cs;
-
-	/* Ensure the currently selected chip is deasserted. */
-	if (chipnr == -1 && nfc->selected >= 0) {
-		cs = &nfc->cs[nfc->selected];
-		jz4780_nemc_assert(nfc->dev, cs->bank, false);
-	}
-
-	nfc->selected = chipnr;
-}
-
-static void ingenic_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
-				  unsigned int ctrl)
-{
-	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
-	struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
-	struct ingenic_nand_cs *cs;
-
-	if (WARN_ON(nfc->selected < 0))
-		return;
-
-	cs = &nfc->cs[nfc->selected];
-
-	jz4780_nemc_assert(nfc->dev, cs->bank, ctrl & NAND_NCE);
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_ALE)
-		writeb(cmd, cs->base + nfc->soc_info->addr_offset);
-	else if (ctrl & NAND_CLE)
-		writeb(cmd, cs->base + nfc->soc_info->cmd_offset);
-}
-
-static int ingenic_nand_dev_ready(struct nand_chip *chip)
-{
-	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
-
-	return gpiod_get_value_cansleep(nand->busy_gpio);
-}
-
 static void ingenic_nand_ecc_hwctl(struct nand_chip *chip, int mode)
 {
 	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
@@ -298,8 +249,91 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
 	return 0;
 }
 
+static int ingenic_nand_exec_instr(struct nand_chip *chip,
+				   struct ingenic_nand_cs *cs,
+				   const struct nand_op_instr *instr)
+{
+	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+	struct ingenic_nfc *nfc = to_ingenic_nfc(chip->controller);
+	unsigned int i;
+
+	switch (instr->type) {
+	case NAND_OP_CMD_INSTR:
+		writeb(instr->ctx.cmd.opcode,
+		       cs->base + nfc->soc_info->cmd_offset);
+		return 0;
+	case NAND_OP_ADDR_INSTR:
+		for (i = 0; i < instr->ctx.addr.naddrs; i++)
+			writeb(instr->ctx.addr.addrs[i],
+			       cs->base + nfc->soc_info->addr_offset);
+		return 0;
+	case NAND_OP_DATA_IN_INSTR:
+		if (instr->ctx.data.force_8bit ||
+		    !(chip->options & NAND_BUSWIDTH_16))
+			ioread8_rep(cs->base + nfc->soc_info->data_offset,
+				    instr->ctx.data.buf.in,
+				    instr->ctx.data.len);
+		else
+			ioread16_rep(cs->base + nfc->soc_info->data_offset,
+				     instr->ctx.data.buf.in,
+				     instr->ctx.data.len);
+		return 0;
+	case NAND_OP_DATA_OUT_INSTR:
+		if (instr->ctx.data.force_8bit ||
+		    !(chip->options & NAND_BUSWIDTH_16))
+			iowrite8_rep(cs->base + nfc->soc_info->data_offset,
+				     instr->ctx.data.buf.out,
+				     instr->ctx.data.len);
+		else
+			iowrite16_rep(cs->base + nfc->soc_info->data_offset,
+				      instr->ctx.data.buf.out,
+				      instr->ctx.data.len);
+		return 0;
+	case NAND_OP_WAITRDY_INSTR:
+		if (!nand->busy_gpio)
+			return nand_soft_waitrdy(chip,
+						 instr->ctx.waitrdy.timeout_ms);
+
+		return nand_gpio_waitrdy(chip, nand->busy_gpio,
+					 instr->ctx.waitrdy.timeout_ms);
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int ingenic_nand_exec_op(struct nand_chip *chip,
+				const struct nand_operation *op,
+				bool check_only)
+{
+	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+	struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+	struct ingenic_nand_cs *cs;
+	unsigned int i;
+	int ret = 0;
+
+	if (check_only)
+		return 0;
+
+	cs = &nfc->cs[op->cs];
+	jz4780_nemc_assert(nfc->dev, cs->bank, true);
+	for (i = 0; i < op->ninstrs; i++) {
+		ret = ingenic_nand_exec_instr(chip, cs, &op->instrs[i]);
+		if (ret)
+			break;
+
+		if (op->instrs[i].delay_ns)
+			ndelay(op->instrs[i].delay_ns);
+	}
+	jz4780_nemc_assert(nfc->dev, cs->bank, false);
+
+	return ret;
+}
+
 static const struct nand_controller_ops ingenic_nand_controller_ops = {
 	.attach_chip = ingenic_nand_attach_chip,
+	.exec_op = ingenic_nand_exec_op,
 };
 
 static int ingenic_nand_init_chip(struct platform_device *pdev,
@@ -339,8 +373,6 @@ static int ingenic_nand_init_chip(struct platform_device *pdev,
 		ret = PTR_ERR(nand->busy_gpio);
 		dev_err(dev, "failed to request busy GPIO: %d\n", ret);
 		return ret;
-	} else if (nand->busy_gpio) {
-		nand->chip.legacy.dev_ready = ingenic_nand_dev_ready;
 	}
 
 	/*
@@ -371,12 +403,7 @@ static int ingenic_nand_init_chip(struct platform_device *pdev,
 		return -ENOMEM;
 	mtd->dev.parent = dev;
 
-	chip->legacy.IO_ADDR_R = cs->base + nfc->soc_info->data_offset;
-	chip->legacy.IO_ADDR_W = cs->base + nfc->soc_info->data_offset;
-	chip->legacy.chip_delay = RB_DELAY_US;
 	chip->options = NAND_NO_SUBPAGE_WRITE;
-	chip->legacy.select_chip = ingenic_nand_select_chip;
-	chip->legacy.cmd_ctrl = ingenic_nand_cmd_ctrl;
 	chip->ecc.mode = NAND_ECC_HW;
 	chip->controller = &nfc->controller;
 	nand_set_flash_node(chip, np);
-- 
2.25.4


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/