A Soft Reset sequence will return the flash to Power-on-Reset (POR) state. It consists of two commands: Soft Reset Enable and Soft Reset. Find out if the sequence is supported from BFPT DWORD 16. Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx> --- drivers/mtd/spi-nor/core.h | 1 + drivers/mtd/spi-nor/sfdp.c | 4 ++++ drivers/mtd/spi-nor/sfdp.h | 2 ++ 3 files changed, 7 insertions(+) diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h index 6338d32a0d77..79ce952c0539 100644 --- a/drivers/mtd/spi-nor/core.h +++ b/drivers/mtd/spi-nor/core.h @@ -26,6 +26,7 @@ enum spi_nor_option_flags { SNOR_F_HAS_SR_TB_BIT6 = BIT(11), SNOR_F_HAS_4BIT_BP = BIT(12), SNOR_F_HAS_SR_BP3_BIT6 = BIT(13), + SNOR_F_SOFT_RESET = BIT(14), }; struct spi_nor_read_command { diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c index be9c6c3d6590..490ece7b3d33 100644 --- a/drivers/mtd/spi-nor/sfdp.c +++ b/drivers/mtd/spi-nor/sfdp.c @@ -611,6 +611,10 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, break; } + /* Soft Reset support. */ + if (bfpt.dwords[BFPT_DWORD(16)] & BFPT_DWORD16_SOFT_RST) + nor->flags |= SNOR_F_SOFT_RESET; + /* Stop here if JESD216 rev B. */ if (bfpt_header->length == BFPT_DWORD_MAX_JESD216B) return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, diff --git a/drivers/mtd/spi-nor/sfdp.h b/drivers/mtd/spi-nor/sfdp.h index e15e30796d62..d1d43ee09a0a 100644 --- a/drivers/mtd/spi-nor/sfdp.h +++ b/drivers/mtd/spi-nor/sfdp.h @@ -84,6 +84,8 @@ struct sfdp_bfpt { #define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20) #define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */ +#define BFPT_DWORD16_SOFT_RST BIT(12) + #define BFPT_DWORD18_CMD_EXT_MASK GENMASK(30, 29) #define BFPT_DWORD18_CMD_EXT_REP (0x0UL << 29) /* Repeat */ #define BFPT_DWORD18_CMD_EXT_INV (0x1UL << 29) /* Invert */ -- 2.26.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/