[PATCH v2] mtd: rawnand: micron: Adapt the PAGE READ flow to constraint controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There are controllers not able to just read data cycles on the
bus. There are controllers not able to do a change column.

If we want to support both, we need to check which operation is
supported first. This is the exact same mechanism that is in use for
parameter page reads (ONFI/JEDEC) as the same problem occurs.

Speed testing does not show any throughput penalty so we do not
optimize more than that. However it is likely that, in the future, a
more robust and exhaustive test will run at boot time to avoid
re-checking what is supported and what is not at every call.

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
---

Changes in v2:
* Added a comment before each check which is a condensate of the
  commit message.
* Collected Boris' R-by tag.

 drivers/mtd/nand/raw/nand_micron.c | 44 ++++++++++++++++++++++++------
 1 file changed, 35 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index b2b047b245f4..bbd0ffbae19a 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -192,6 +192,7 @@ static int micron_nand_on_die_ecc_status_4(struct nand_chip *chip, u8 status,
 	struct micron_nand *micron = nand_get_manufacturer_data(chip);
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	unsigned int step, max_bitflips = 0;
+	bool use_datain = false;
 	int ret;
 
 	if (!(status & NAND_ECC_STATUS_WRITE_RECOMMENDED)) {
@@ -211,8 +212,18 @@ static int micron_nand_on_die_ecc_status_4(struct nand_chip *chip, u8 status,
 	 * in non-raw mode, even if the user did not request those bytes.
 	 */
 	if (!oob_required) {
-		ret = nand_read_data_op(chip, chip->oob_poi, mtd->oobsize,
-					false, false);
+		if (!nand_has_exec_op(chip) ||
+		    !nand_read_data_op(chip, chip->oob_poi, mtd->oobsize, false,
+				       true))
+			use_datain = true;
+
+		if (use_datain)
+			ret = nand_read_data_op(chip, chip->oob_poi,
+						mtd->oobsize, false, false);
+		else
+			ret = nand_change_read_column_op(chip, mtd->writesize,
+							 chip->oob_poi,
+							 mtd->oobsize, false);
 		if (ret)
 			return ret;
 	}
@@ -285,6 +296,7 @@ micron_nand_read_page_on_die_ecc(struct nand_chip *chip, uint8_t *buf,
 				 int oob_required, int page)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	bool use_datain = false;
 	u8 status;
 	int ret, max_bitflips = 0;
 
@@ -300,14 +312,28 @@ micron_nand_read_page_on_die_ecc(struct nand_chip *chip, uint8_t *buf,
 	if (ret)
 		goto out;
 
-	ret = nand_exit_status_op(chip);
-	if (ret)
-		goto out;
+	if (!nand_has_exec_op(chip) ||
+	    !nand_read_data_op(chip, buf, mtd->writesize, false, true))
+		use_datain = true;
 
-	ret = nand_read_data_op(chip, buf, mtd->writesize, false, false);
-	if (!ret && oob_required)
-		ret = nand_read_data_op(chip, chip->oob_poi, mtd->oobsize,
-					false, false);
+	if (use_datain) {
+		ret = nand_exit_status_op(chip);
+		if (ret)
+			goto out;
+
+		ret = nand_read_data_op(chip, buf, mtd->writesize, false,
+					false);
+		if (!ret && oob_required)
+			ret = nand_read_data_op(chip, chip->oob_poi,
+						mtd->oobsize, false, false);
+	} else {
+		ret = nand_change_read_column_op(chip, 0, buf, mtd->writesize,
+						 false);
+		if (!ret && oob_required)
+			ret = nand_change_read_column_op(chip, mtd->writesize,
+							 chip->oob_poi,
+							 mtd->oobsize, false);
+	}
 
 	if (chip->ecc.strength == 4)
 		max_bitflips = micron_nand_on_die_ecc_status_4(chip, status,
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux