Re: [PATCH v4 0/5] Micron SLC NAND filling block

[Bean Huo <huobean@xxxxxxxxx>]

hi,  Miquel

On Mon, 2020-05-18 at 17:22 +0200, Miquel Raynal wrote:
> Hi Bean,
> 
> Bean Huo <huobean@xxxxxxxxx> wrote on Mon, 18 May 2020 15:59:38
> +0200:
> 
> > From: Bean Huo <beanhuo@xxxxxxxxxx>
> > 
> > After submission of patch V1 [1] and V2 [2], we stopped its update
> > since we get
> > stuck in the solution on how to avoid the power-loss issue in case
> > power-cut
> > hits the block filling. In the v1 and v2, to avoid this issue, we
> > always damaged
> > page0, page1, this's based on the hypothesis that NAND FS is UBIFS.
> > This
> > FS-specifical code is unacceptable in the MTD layer. Also, it
> > cannot cover all
> > NAND based file system. Based on the current discussion, seems that
> > re-write all
> > first 15 page from page0 is a satisfactory solution.
> 
> We have a layering problem now. Maybe we should just have an MTD
> internal variable like min_written_pages_before_erase that the Micron
> driver could set to a !0 value.
> 
> Then, the handling could be done by the user (UBI/UBIFS, JFFS2, MTD
> user if exported).
> 

This is NAND its own problem, if no significant adantage, I don't think
it's a good solution to extend the problem to the upper FS layer.
also, in the FS erase path, doesn't have the programmed pages counter.
we should repeat the same approach as we did in MTD layer.

> > 
> > Meanwhile, I borrowed one idea from Miquel Raynal patchset [3], in
> > which keeps
> > a recode of programmed pages, base on it, for most of the cases, we
> > don't need
> > to read every page to see if current erasing block is a partially
> > programmed
> > block.
> > 
> > Changelog:
> > 
> > v3 - v4:
> >     1. In the patch 4/5, change to directly use ecc.strength to
> > judge the page
> >        is a empty page or not, rather than max_bitflips < mtd-
> > >bitflip_threshold
> >     2. In the patch 5/5, for the powerloss case, from the next time
> > boot up,
> >        lots of page will be programmed from >page15 address, if
> > still using
> >        first_p as GENMASK() bitmask starting position, writtenp
> > will be always 0,
> >        fix it by changing its bitmask starting at bit position 0.
> > 
> > v2 - v3:
> >     1. Rebase patch to the latest MTD git tree
> >     2. Add a record that keeps tracking the programmed pages in the
> > first 16
> >        pages
> >     3. Change from program odd pages, damage page 0 and page 1, to
> > program all
> >        first 15 pages
> >     4. Address issues which exist in the V2.
> > 
> > v1 - v2:
> >     1. Rebased V1 to latest Linux kernel.
> >     2. Add erase preparation function pointer in
> > nand_manufacturer_ops.
> > 
> > 
> > [1] https://www.spinics.net/lists/linux-mtd/msg04112.html
> > [2] https://www.spinics.net/lists/linux-mtd/msg04450.html
> > [3] https://www.spinics.net/lists/linux-mtd/msg13083.html
> > 
> > 
> > Bean Huo (5):
> >   mtd: rawnand: group all NAND specific ops into new nand_chip_ops
> >   mtd: rawnand: Add {pre,post}_erase hooks in nand_chip_ops
> >   mtd: rawnand: Add write_oob hook in nand_chip_ops
> >   mtd: rawnand: Introduce a new function
> > nand_check_is_erased_page()
> >   mtd: rawnand: micron: Micron SLC NAND filling block
> 
> When you take my patches in your series, especially when not touching
> them at all, you should keep my Authorship and SoB first, then add
> your
> SoB.
> 

sorry for my fault, I thought adding your Signed-off-by in 3/5 is
suffient. you mean I should add your signed-off-by in 5/5 as well?
I will do that in next version.

thanks Miquel.


BTW: would you please help me review other code?


 
Bean


> 
> Thanks,
> Miquèl


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/