Renesas Reduced Pin Count Interface (RPC-IF) allows a SPI flash or HyperFlash connected to the SoC to be accessed via the external address space read mode or the manual mode. Document the device tree bindings for the Renesas RPC-IF found in the R-Car gen3 SoCs. Based on the original patch by Mason Yang <masonccyang@xxxxxxxxxxx>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx> --- Changes in version 3: - fixed up the whitespace and added hyphens in the "compatible" prop text, also removed the comments; - specified the subnode name as "flash", and used "enum" in the subnode text; - fixed up the SPDX-License-Identifier: tag. Changes in version 2: - rewrote the bindings in YAML. Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml | 88 ++++++++++ 1 file changed, 88 insertions(+) Index: linux/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml =================================================================== --- /dev/null +++ linux/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Reduced Pin Count Interface (RPC-IF) + +maintainers: + - Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx> + +description: | + Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to + be accessed via the external address space read mode or the manual mode. + + The flash chip itself should be represented by a subnode of the RPC-IF node. + The flash interface is selected based on the "compatible" property of this + subnode: + - if it contains "jedec,spi-nor", then SPI is used; + - if it contains "cfi-flash", then HyperFlash is used. + +allOf: + - $ref: "/schemas/spi/spi-controller.yaml#" + +properties: + compatible: + items: + - enum: + - renesas,r8a77980-rpc-if + - renesas,r8a77995-rpc-if + - enum: + - renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device + + reg: + items: + - description: RPC-IF registers + - description: direct mapping read mode area + - description: write buffer area + + reg-names: + items: + - const: regs + - const: dirmap + - const: wbuf + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +patternProperties: + "flash@[0-9a-f]+$": + type: object + properties: + compatible: + - enum: + - cfi-flash + - jedec,spi-nor + +examples: + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/power/r8a77995-sysc.h> + + spi@ee200000 { + compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; + }; ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/