[PATCH v2 6/8] mtd: rawnand: bcm47xx: Get rid of the legacy implementation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now that exec_op() is implemented we don't need to implement all those
legacy hooks, which simplifies the code quite a bit.

Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
Reviewed-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
Changes in v2:
* Add R-b
---
 .../nand/raw/bcm47xxnflash/bcm47xxnflash.h    |   6 -
 .../mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c  | 315 ------------------
 2 files changed, 321 deletions(-)

diff --git a/drivers/mtd/nand/raw/bcm47xxnflash/bcm47xxnflash.h b/drivers/mtd/nand/raw/bcm47xxnflash/bcm47xxnflash.h
index 00d0974b73cb..8de0e7e0a3a4 100644
--- a/drivers/mtd/nand/raw/bcm47xxnflash/bcm47xxnflash.h
+++ b/drivers/mtd/nand/raw/bcm47xxnflash/bcm47xxnflash.h
@@ -14,12 +14,6 @@ struct bcm47xxnflash {
 	struct bcma_drv_cc *cc;
 
 	struct nand_chip nand_chip;
-
-	unsigned curr_command;
-	int curr_page_addr;
-	int curr_column;
-
-	u8 id_data[8];
 };
 
 int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n);
diff --git a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
index edf0c3d7b561..b6c5db9acac9 100644
--- a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
+++ b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
@@ -75,313 +75,10 @@ static int bcm47xxnflash_ops_bcm4706_ctl_cmd(struct bcma_drv_cc *cc, u32 code)
 	return 0;
 }
 
-static int bcm47xxnflash_ops_bcm4706_poll(struct bcma_drv_cc *cc)
-{
-	int i;
-
-	for (i = 0; i < NFLASH_READY_RETRIES; i++) {
-		if (bcma_cc_read32(cc, BCMA_CC_NFLASH_CTL) & NCTL_READY) {
-			if (bcma_cc_read32(cc, BCMA_CC_NFLASH_CTL) &
-			    BCMA_CC_NFLASH_CTL_ERR) {
-				pr_err("Error on polling\n");
-				return -EBUSY;
-			} else {
-				return 0;
-			}
-		}
-	}
-
-	pr_err("Polling timeout!\n");
-	return -EBUSY;
-}
-
-/**************************************************
- * R/W
- **************************************************/
-
-static void bcm47xxnflash_ops_bcm4706_read(struct mtd_info *mtd, uint8_t *buf,
-					   int len)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip);
-
-	u32 ctlcode;
-	u32 *dest = (u32 *)buf;
-	int i;
-	int toread;
-
-	BUG_ON(b47n->curr_page_addr & ~nand_chip->pagemask);
-	/* Don't validate column using nand_chip->page_shift, it may be bigger
-	 * when accessing OOB */
-
-	while (len) {
-		/* We can read maximum of 0x200 bytes at once */
-		toread = min(len, 0x200);
-
-		/* Set page and column */
-		bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_COL_ADDR,
-				b47n->curr_column);
-		bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_ROW_ADDR,
-				b47n->curr_page_addr);
-
-		/* Prepare to read */
-		ctlcode = NCTL_CSA | NCTL_CMD1W | NCTL_ROW | NCTL_COL |
-			  NCTL_CMD0;
-		ctlcode |= NAND_CMD_READSTART << 8;
-		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, ctlcode))
-			return;
-		if (bcm47xxnflash_ops_bcm4706_poll(b47n->cc))
-			return;
-
-		/* Eventually read some data :) */
-		for (i = 0; i < toread; i += 4, dest++) {
-			ctlcode = NCTL_CSA | NCTL_DATA_CYCLES(4) | NCTL_READ;
-			if (i == toread - 4) /* Last read goes without that */
-				ctlcode &= ~NCTL_CSA;
-			if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc,
-							      ctlcode))
-				return;
-			*dest = bcma_cc_read32(b47n->cc, BCMA_CC_NFLASH_DATA);
-		}
-
-		b47n->curr_column += toread;
-		len -= toread;
-	}
-}
-
-static void bcm47xxnflash_ops_bcm4706_write(struct mtd_info *mtd,
-					    const uint8_t *buf, int len)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip);
-	struct bcma_drv_cc *cc = b47n->cc;
-
-	u32 ctlcode;
-	const u32 *data = (u32 *)buf;
-	int i;
-
-	BUG_ON(b47n->curr_page_addr & ~nand_chip->pagemask);
-	/* Don't validate column using nand_chip->page_shift, it may be bigger
-	 * when accessing OOB */
-
-	for (i = 0; i < len; i += 4, data++) {
-		bcma_cc_write32(cc, BCMA_CC_NFLASH_DATA, *data);
-
-		ctlcode = NCTL_CSA | NCTL_DATA_CYCLES(4) | NCTL_WRITE;
-		if (i == len - 4) /* Last read goes without that */
-			ctlcode &= ~NCTL_CSA;
-		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode)) {
-			pr_err("%s ctl_cmd didn't work!\n", __func__);
-			return;
-		}
-	}
-
-	b47n->curr_column += len;
-}
-
 /**************************************************
  * NAND chip ops
  **************************************************/
 
-static void bcm47xxnflash_ops_bcm4706_cmd_ctrl(struct nand_chip *nand_chip,
-					       int cmd, unsigned int ctrl)
-{
-	struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip);
-	u32 code = 0;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (cmd & NAND_CTRL_CLE)
-		code = cmd | NCTL_CMD0;
-
-	/* nCS is not needed for reset command */
-	if (cmd != NAND_CMD_RESET)
-		code |= NCTL_CSA;
-
-	bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, code);
-}
-
-/* Default nand_select_chip calls cmd_ctrl, which is not used in BCM4706 */
-static void bcm47xxnflash_ops_bcm4706_select_chip(struct nand_chip *chip,
-						  int cs)
-{
-	return;
-}
-
-static int bcm47xxnflash_ops_bcm4706_dev_ready(struct nand_chip *nand_chip)
-{
-	struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip);
-
-	return !!(bcma_cc_read32(b47n->cc, BCMA_CC_NFLASH_CTL) & NCTL_READY);
-}
-
-/*
- * Default nand_command and nand_command_lp don't match BCM4706 hardware layout.
- * For example, reading chip id is performed in a non-standard way.
- * Setting column and page is also handled differently, we use a special
- * registers of ChipCommon core. Hacking cmd_ctrl to understand and convert
- * standard commands would be much more complicated.
- */
-static void bcm47xxnflash_ops_bcm4706_cmdfunc(struct nand_chip *nand_chip,
-					      unsigned command, int column,
-					      int page_addr)
-{
-	struct mtd_info *mtd = nand_to_mtd(nand_chip);
-	struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip);
-	struct bcma_drv_cc *cc = b47n->cc;
-	u32 ctlcode;
-	int i;
-
-	if (column != -1)
-		b47n->curr_column = column;
-	if (page_addr != -1)
-		b47n->curr_page_addr = page_addr;
-
-	switch (command) {
-	case NAND_CMD_RESET:
-		nand_chip->legacy.cmd_ctrl(nand_chip, command, NAND_CTRL_CLE);
-
-		ndelay(100);
-		nand_wait_ready(nand_chip);
-		break;
-	case NAND_CMD_READID:
-		ctlcode = NCTL_CSA | NCTL_SPECADDR | NCTL_CMD1W | NCTL_CMD0;
-		ctlcode |= NAND_CMD_READID;
-		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, ctlcode)) {
-			pr_err("READID error\n");
-			break;
-		}
-
-		/*
-		 * Reading is specific, last one has to go without NCTL_CSA
-		 * bit. We don't know how many reads NAND subsystem is going
-		 * to perform, so cache everything.
-		 */
-		for (i = 0; i < ARRAY_SIZE(b47n->id_data); i++) {
-			ctlcode = NCTL_CSA | NCTL_READ | NCTL_DATA_CYCLES(1);
-			if (i == ARRAY_SIZE(b47n->id_data) - 1)
-				ctlcode &= ~NCTL_CSA;
-			if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc,
-							      ctlcode)) {
-				pr_err("READID error\n");
-				break;
-			}
-			b47n->id_data[i] =
-				bcma_cc_read32(b47n->cc, BCMA_CC_NFLASH_DATA)
-				& 0xFF;
-		}
-
-		break;
-	case NAND_CMD_STATUS:
-		ctlcode = NCTL_CSA | NCTL_CMD0 | NAND_CMD_STATUS;
-		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode))
-			pr_err("STATUS command error\n");
-		break;
-	case NAND_CMD_READ0:
-		break;
-	case NAND_CMD_READOOB:
-		if (page_addr != -1)
-			b47n->curr_column += mtd->writesize;
-		break;
-	case NAND_CMD_ERASE1:
-		bcma_cc_write32(cc, BCMA_CC_NFLASH_ROW_ADDR,
-				b47n->curr_page_addr);
-		ctlcode = NCTL_ROW | NCTL_CMD1W | NCTL_CMD0 |
-			  NAND_CMD_ERASE1 | (NAND_CMD_ERASE2 << 8);
-		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode))
-			pr_err("ERASE1 failed\n");
-		break;
-	case NAND_CMD_ERASE2:
-		break;
-	case NAND_CMD_SEQIN:
-		/* Set page and column */
-		bcma_cc_write32(cc, BCMA_CC_NFLASH_COL_ADDR,
-				b47n->curr_column);
-		bcma_cc_write32(cc, BCMA_CC_NFLASH_ROW_ADDR,
-				b47n->curr_page_addr);
-
-		/* Prepare to write */
-		ctlcode = NCTL_CSA | NCTL_ROW | NCTL_COL | NCTL_CMD0;
-		ctlcode |= NAND_CMD_SEQIN;
-		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode))
-			pr_err("SEQIN failed\n");
-		break;
-	case NAND_CMD_PAGEPROG:
-		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, NCTL_CMD0 |
-							  NAND_CMD_PAGEPROG))
-			pr_err("PAGEPROG failed\n");
-		if (bcm47xxnflash_ops_bcm4706_poll(cc))
-			pr_err("PAGEPROG not ready\n");
-		break;
-	default:
-		pr_err("Command 0x%X unsupported\n", command);
-		break;
-	}
-	b47n->curr_command = command;
-}
-
-static u8 bcm47xxnflash_ops_bcm4706_read_byte(struct nand_chip *nand_chip)
-{
-	struct mtd_info *mtd = nand_to_mtd(nand_chip);
-	struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip);
-	struct bcma_drv_cc *cc = b47n->cc;
-	u32 tmp = 0;
-
-	switch (b47n->curr_command) {
-	case NAND_CMD_READID:
-		if (b47n->curr_column >= ARRAY_SIZE(b47n->id_data)) {
-			pr_err("Requested invalid id_data: %d\n",
-			       b47n->curr_column);
-			return 0;
-		}
-		return b47n->id_data[b47n->curr_column++];
-	case NAND_CMD_STATUS:
-		if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc,
-						      NCTL_READ |
-						      NCTL_DATA_CYCLES(1)))
-			return 0;
-		return bcma_cc_read32(cc, BCMA_CC_NFLASH_DATA) & 0xff;
-	case NAND_CMD_READOOB:
-		bcm47xxnflash_ops_bcm4706_read(mtd, (u8 *)&tmp, 4);
-		return tmp & 0xFF;
-	}
-
-	pr_err("Invalid command for byte read: 0x%X\n", b47n->curr_command);
-	return 0;
-}
-
-static void bcm47xxnflash_ops_bcm4706_read_buf(struct nand_chip *nand_chip,
-					       uint8_t *buf, int len)
-{
-	struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip);
-
-	switch (b47n->curr_command) {
-	case NAND_CMD_READ0:
-	case NAND_CMD_READOOB:
-		bcm47xxnflash_ops_bcm4706_read(nand_to_mtd(nand_chip), buf,
-					       len);
-		return;
-	}
-
-	pr_err("Invalid command for buf read: 0x%X\n", b47n->curr_command);
-}
-
-static void bcm47xxnflash_ops_bcm4706_write_buf(struct nand_chip *nand_chip,
-						const uint8_t *buf, int len)
-{
-	struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip);
-
-	switch (b47n->curr_command) {
-	case NAND_CMD_SEQIN:
-		bcm47xxnflash_ops_bcm4706_write(nand_to_mtd(nand_chip), buf,
-						len);
-		return;
-	}
-
-	pr_err("Invalid command for buf write: 0x%X\n", b47n->curr_command);
-}
-
 static int
 bcm47xxnflash_ops_bcm4706_exec_cmd_addr(struct nand_chip *chip,
 					const struct nand_subop *subop)
@@ -525,7 +222,6 @@ static const struct nand_controller_ops bcm47xxnflash_ops = {
 
 int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n)
 {
-	struct nand_chip *nand_chip = (struct nand_chip *)&b47n->nand_chip;
 	int err;
 	u32 freq;
 	u16 clock;
@@ -538,17 +234,6 @@ int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n)
 	nand_controller_init(&b47n->base);
 	b47n->base.ops = &bcm47xxnflash_ops;
 	b47n->nand_chip.controller = &b47n->base;
-	nand_chip->legacy.select_chip = bcm47xxnflash_ops_bcm4706_select_chip;
-	nand_chip->legacy.cmd_ctrl = bcm47xxnflash_ops_bcm4706_cmd_ctrl;
-	nand_chip->legacy.dev_ready = bcm47xxnflash_ops_bcm4706_dev_ready;
-	b47n->nand_chip.legacy.cmdfunc = bcm47xxnflash_ops_bcm4706_cmdfunc;
-	b47n->nand_chip.legacy.read_byte = bcm47xxnflash_ops_bcm4706_read_byte;
-	b47n->nand_chip.legacy.read_buf = bcm47xxnflash_ops_bcm4706_read_buf;
-	b47n->nand_chip.legacy.write_buf = bcm47xxnflash_ops_bcm4706_write_buf;
-	b47n->nand_chip.legacy.set_features = nand_get_set_features_notsupp;
-	b47n->nand_chip.legacy.get_features = nand_get_set_features_notsupp;
-
-	nand_chip->legacy.chip_delay = 50;
 	b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH;
 	b47n->nand_chip.ecc.mode = NAND_ECC_NONE; /* TODO: implement ECC */
 
-- 
2.25.4


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux