[PATCH 2/2] mtd: rawnand: Add timings for Kioxia TH58NVG2S3HBAI4

[Rickard Andersson <rickaran@xxxxxxxx>]

From: Rickard x Andersson <rickaran@xxxxxxxx>

The Kioxia/Toshiba TH58NVG2S3HBAI4 NAND memory is not a
ONFI compliant memory. The timings of the memory is quite
close to ONFI mode 4 but is breaking that spec.

Erase block read speed is increased from 6910 KiB/s to
13490 KiB/s. Erase block write speed is increased from
3350 KiB/s to 4410 KiB/s.

Tested on IMX6SX which has a NAND controller supporting
EDO mode.

Signed-off-by: Rickard x Andersson <rickaran@xxxxxxxx>
---
 drivers/mtd/nand/raw/nand_ids.c     |  3 ++
 drivers/mtd/nand/raw/nand_toshiba.c | 61 +++++++++++++++++++++++++++++++++++++
 2 files changed, 64 insertions(+)

diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c
index e0dbc2e316c7..8b676e8b481b 100644
--- a/drivers/mtd/nand/raw/nand_ids.c
+++ b/drivers/mtd/nand/raw/nand_ids.c
@@ -52,6 +52,9 @@ struct nand_flash_dev nand_flash_ids[] = {
 		{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
 		  SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
 		  NAND_ECC_INFO(40, SZ_1K), 4 },
+	{"TH58NVG2S3HBAI4 4G 3.3V 8-bit",
+		{ .id = {0x98, 0xdc, 0x91, 0x15, 0x76} },
+		  SZ_2K, SZ_512, SZ_128K, 0, 5, 128, NAND_ECC_INFO(8, SZ_512) },
 
 	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
 	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index b6efaf5195bb..380499cfa491 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -26,6 +26,52 @@
 /* Max ECC Steps for BENAND */
 #define TOSHIBA_NAND_MAX_ECC_STEPS		8
 
+static const struct nand_data_interface th58nvg2s3hbai4_timings = {
+	.type = NAND_SDR_IFACE,
+	.timings.mode = 0,
+	.timings.sdr = {
+		.tPROG_max = 700000000,
+		.tBERS_max = 5000000000,
+		.tCCS_min = 500000,
+		.tR_max = 200000000,
+		.tADL_min = 400000,
+		.tALH_min = 5000,
+		.tALS_min = 12000,
+		.tAR_min = 10000,
+		.tCEA_max = 25000,
+		.tCEH_min = 20000,
+		.tCH_min = 5000,
+		.tCHZ_max = 20000,
+		.tCLH_min = 5000,
+		.tCLR_min = 10000,
+		.tCLS_min = 12000,
+		.tCOH_min = 0,
+		.tCS_min = 20000,
+		.tDH_min = 5000,
+		.tDS_min = 12000,
+		.tFEAT_max = 1000000,
+		.tIR_min = 0,
+		.tITC_max = 1000000,
+		.tRC_min = 25000,
+		.tREA_max = 20000,
+		.tREH_min = 10000,
+		.tRHOH_min = 25000,
+		.tRHW_min = 30000,
+		.tRHZ_max = 60000,
+		.tRLOH_min = 5000,
+		.tRP_min = 12000,
+		.tRR_min = 20000,
+		.tRST_max = 500000000,
+		.tWB_max = 100000,
+		.tWC_min = 25000,
+		.tWH_min = 10000,
+		.tWHR_min = 60000,
+		.tWP_min = 12000,
+		.tWW_min = 100000,
+	}
+};
+
+
 static int toshiba_nand_benand_read_eccstatus_op(struct nand_chip *chip,
 						 u8 *buf)
 {
@@ -194,6 +240,13 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
 	}
 }
 
+static int th58nvg2s3hbai4_init_data_interface(struct nand_chip *chip)
+{
+	chip->data_interface = th58nvg2s3hbai4_timings;
+
+	return 0;
+}
+
 static int tc58teg5dclta00_init(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
@@ -205,6 +258,12 @@ static int tc58teg5dclta00_init(struct nand_chip *chip)
 	return 0;
 }
 
+static int th58nvg2s3hbai4_init(struct nand_chip *chip)
+{
+	chip->ops.init_data_interface = th58nvg2s3hbai4_init_data_interface;
+	return 0;
+}
+
 static int toshiba_nand_init(struct nand_chip *chip)
 {
 	if (nand_is_slc(chip))
@@ -217,6 +276,8 @@ static int toshiba_nand_init(struct nand_chip *chip)
 
 	if (!strcmp("TC58TEG5DCLTA00", chip->parameters.model))
 		tc58teg5dclta00_init(chip);
+	if (!strncmp("TH58NVG2S3HBAI4", chip->parameters.model, 15))
+		th58nvg2s3hbai4_init(chip);
 
 	return 0;
 }
-- 
2.11.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/