[PATCH v8 02/11] pstore/blk: Introduce backend for block devices

[Kees Cook <keescook@xxxxxxxxxxxx>]

From: WeiXiong Liao <liaoweixiong@xxxxxxxxxxxxxxxxx>

pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.

The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
  regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
  increases costs, instead preferring cheaper solutions, like block
  devices.

pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.

Signed-off-by: WeiXiong Liao <liaoweixiong@xxxxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/1585126506-18635-3-git-send-email-liaoweixiong@xxxxxxxxxxxxxxxxx
Co-developed-by: Kees Cook <keescook@xxxxxxxxxxxx>
Signed-off-by: Kees Cook <keescook@xxxxxxxxxxxx>
---
 fs/pstore/Kconfig          |  64 ++++++
 fs/pstore/Makefile         |   3 +
 fs/pstore/blk.c            | 437 +++++++++++++++++++++++++++++++++++++
 include/linux/pstore_blk.h |  51 +++++
 4 files changed, 555 insertions(+)
 create mode 100644 fs/pstore/blk.c
 create mode 100644 include/linux/pstore_blk.h

diff --git a/fs/pstore/Kconfig b/fs/pstore/Kconfig
index 98d2457bdd9f..958bec75f907 100644
--- a/fs/pstore/Kconfig
+++ b/fs/pstore/Kconfig
@@ -160,3 +160,67 @@ config PSTORE_ZONE
 	help
 	  The common layer for pstore/blk (and pstore/ram in the future)
 	  to manage storage in zones.
+
+config PSTORE_BLK
+	tristate "Log panic/oops to a block device"
+	depends on PSTORE
+	depends on BLOCK
+	select PSTORE_ZONE
+	default n
+	help
+	  This enables panic and oops message to be logged to a block dev
+	  where it can be read back at some later point.
+
+	  If unsure, say N.
+
+config PSTORE_BLK_BLKDEV
+	string "block device identifier"
+	depends on PSTORE_BLK
+	default ""
+	help
+	  Which block device should be used for pstore/blk.
+
+	  It accept the following variants:
+	  1) <hex_major><hex_minor> device number in hexadecimal representation,
+	     with no leading 0x, for example b302.
+	  2) /dev/<disk_name> represents the device number of disk
+	  3) /dev/<disk_name><decimal> represents the device number
+	     of partition - device number of disk plus the partition number
+	  4) /dev/<disk_name>p<decimal> - same as the above, this form is
+	     used when disk name of partitioned disk ends with a digit.
+	  5) PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF representing the
+	     unique id of a partition if the partition table provides it.
+	     The UUID may be either an EFI/GPT UUID, or refer to an MSDOS
+	     partition using the format SSSSSSSS-PP, where SSSSSSSS is a zero-
+	     filled hex representation of the 32-bit "NT disk signature", and PP
+	     is a zero-filled hex representation of the 1-based partition number.
+	  6) PARTUUID=<UUID>/PARTNROFF=<int> to select a partition in relation
+	     to a partition with a known unique id.
+	  7) <major>:<minor> major and minor number of the device separated by
+	     a colon.
+
+	  NOTE that, both Kconfig and module parameters can configure
+	  pstore/blk, but module parameters have priority over Kconfig.
+
+config PSTORE_BLK_KMSG_SIZE
+	int "Size in Kbytes of kmsg dump log to store"
+	depends on PSTORE_BLK
+	default 64
+	help
+	  This just sets size of kmsg dump (oops, panic, etc) log for
+	  pstore/blk. The size is in KB and must be a multiple of 4.
+
+	  NOTE that, both Kconfig and module parameters can configure
+	  pstore/blk, but module parameters have priority over Kconfig.
+
+config PSTORE_BLK_MAX_REASON
+	int "Maximum kmsg dump reason to store"
+	depends on PSTORE_BLK
+	default 2
+	help
+	  The maximum reason for kmsg dumps to store. The default is
+	  2 (KMSG_DUMP_OOPS), see include/linux/kmsg_dump.h's
+	  enum kmsg_dump_reason for more details.
+
+	  NOTE that, both Kconfig and module parameters can configure
+	  pstore/blk, but module parameters have priority over Kconfig.
diff --git a/fs/pstore/Makefile b/fs/pstore/Makefile
index 58a967cbe4af..c270467aeece 100644
--- a/fs/pstore/Makefile
+++ b/fs/pstore/Makefile
@@ -15,3 +15,6 @@ obj-$(CONFIG_PSTORE_RAM)	+= ramoops.o
 
 pstore_zone-objs += zone.o
 obj-$(CONFIG_PSTORE_ZONE)	+= pstore_zone.o
+
+pstore_blk-objs += blk.o
+obj-$(CONFIG_PSTORE_BLK)	+= pstore_blk.o
diff --git a/fs/pstore/blk.c b/fs/pstore/blk.c
new file mode 100644
index 000000000000..6490c60af0dc
--- /dev/null
+++ b/fs/pstore/blk.c
@@ -0,0 +1,437 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Implements pstore backend driver that write to block (or non-block) storage
+ * devices, using the pstore/zone API.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "../../block/blk.h"
+#include <linux/blkdev.h>
+#include <linux/string.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pstore_blk.h>
+#include <linux/mount.h>
+#include <linux/uio.h>
+
+static long kmsg_size = CONFIG_PSTORE_BLK_KMSG_SIZE;
+module_param(kmsg_size, long, 0400);
+MODULE_PARM_DESC(kmsg_size, "kmsg dump record size in kbytes");
+
+static int max_reason = CONFIG_PSTORE_BLK_MAX_REASON;
+module_param(max_reason, int, 0400);
+MODULE_PARM_DESC(max_reason,
+		 "maximum reason for kmsg dump (default 2: Oops and Panic)");
+
+/*
+ * blkdev - the block device to use for pstore storage
+ *
+ * Usually, this will be a partition of a block device.
+ *
+ * blkdev accepts the following variants:
+ * 1) <hex_major><hex_minor> device number in hexadecimal representation,
+ *    with no leading 0x, for example b302.
+ * 2) /dev/<disk_name> represents the device number of disk
+ * 3) /dev/<disk_name><decimal> represents the device number
+ *    of partition - device number of disk plus the partition number
+ * 4) /dev/<disk_name>p<decimal> - same as the above, that form is
+ *    used when disk name of partitioned disk ends on a digit.
+ * 5) PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF representing the
+ *    unique id of a partition if the partition table provides it.
+ *    The UUID may be either an EFI/GPT UUID, or refer to an MSDOS
+ *    partition using the format SSSSSSSS-PP, where SSSSSSSS is a zero-
+ *    filled hex representation of the 32-bit "NT disk signature", and PP
+ *    is a zero-filled hex representation of the 1-based partition number.
+ * 6) PARTUUID=<UUID>/PARTNROFF=<int> to select a partition in relation to
+ *    a partition with a known unique id.
+ * 7) <major>:<minor> major and minor number of the device separated by
+ *    a colon.
+ */
+static char blkdev[80] = CONFIG_PSTORE_BLK_BLKDEV;
+module_param_string(blkdev, blkdev, 80, 0400);
+MODULE_PARM_DESC(blkdev, "block device for pstore storage");
+
+/*
+ * All globals must only be accessed under the pstore_blk_lock
+ * during the register/unregister functions.
+ */
+static DEFINE_MUTEX(pstore_blk_lock);
+static struct block_device *psblk_bdev;
+static struct pstore_zone_info *pstore_zone_info;
+static pstore_blk_panic_write_op blkdev_panic_write;
+
+struct bdev_info {
+	dev_t devt;
+	sector_t nr_sects;
+	sector_t start_sect;
+};
+
+/**
+ * struct pstore_device_info - back-end pstore/blk driver structure.
+ *
+ * @total_size: The total size in bytes pstore/blk can use. It must be greater
+ *		than 4096 and be multiple of 4096.
+ * @flags:	Refer to macro starting with PSTORE_FLAGS defined in
+ *		linux/pstore.h. It means what front-ends this device support.
+ *		Zero means all backends for compatible.
+ * @read:	The general read operation. Both of the function parameters
+ *		@size and @offset are relative value to bock device (not the
+ *		whole disk).
+ *		On success, the number of bytes should be returned, others
+ *		means error.
+ * @write:	The same as @read.
+ * @panic_write:The write operation only used for panic case. It's optional
+ *		if you do not care panic log. The parameters and return value
+ *		are the same as @read.
+ */
+struct pstore_device_info {
+	unsigned long total_size;
+	unsigned int flags;
+	pstore_zone_read_op read;
+	pstore_zone_write_op write;
+	pstore_zone_write_op panic_write;
+};
+
+static int psblk_register_do(struct pstore_device_info *dev)
+{
+	int ret;
+
+	if (!dev || !dev->total_size || !dev->read || !dev->write)
+		return -EINVAL;
+
+	mutex_lock(&pstore_blk_lock);
+
+	/* someone already registered before */
+	if (pstore_zone_info) {
+		mutex_unlock(&pstore_blk_lock);
+		return -EBUSY;
+	}
+	pstore_zone_info = kzalloc(sizeof(struct pstore_zone_info), GFP_KERNEL);
+	if (!pstore_zone_info) {
+		mutex_unlock(&pstore_blk_lock);
+		return -ENOMEM;
+	}
+
+	/* zero means not limit on which backends to attempt to store. */
+	if (!dev->flags)
+		dev->flags = UINT_MAX;
+
+#define verify_size(name, alignsize, enabled) {				\
+		long _##name_ = (enabled) ? (name) : 0;			\
+		_##name_ = _##name_ <= 0 ? 0 : (_##name_ * 1024);	\
+		if (_##name_ & ((alignsize) - 1)) {			\
+			pr_info(#name " must align to %d\n",		\
+					(alignsize));			\
+			_##name_ = ALIGN(name, (alignsize));		\
+		}							\
+		name = _##name_ / 1024;					\
+		pstore_zone_info->name = _##name_;			\
+	}
+
+	verify_size(kmsg_size, 4096, dev->flags & PSTORE_FLAGS_DMESG);
+#undef verify_size
+
+	pstore_zone_info->total_size = dev->total_size;
+	pstore_zone_info->max_reason = max_reason;
+	pstore_zone_info->read = dev->read;
+	pstore_zone_info->write = dev->write;
+	pstore_zone_info->panic_write = dev->panic_write;
+	pstore_zone_info->name = KBUILD_MODNAME;
+	pstore_zone_info->owner = THIS_MODULE;
+
+	ret = register_pstore_zone(pstore_zone_info);
+	if (ret) {
+		kfree(pstore_zone_info);
+		pstore_zone_info = NULL;
+	}
+	mutex_unlock(&pstore_blk_lock);
+	return ret;
+}
+
+static void psblk_unregister_do(struct pstore_device_info *dev)
+{
+	mutex_lock(&pstore_blk_lock);
+	if (pstore_zone_info && pstore_zone_info->read == dev->read) {
+		unregister_pstore_zone(pstore_zone_info);
+		kfree(pstore_zone_info);
+		pstore_zone_info = NULL;
+	}
+	mutex_unlock(&pstore_blk_lock);
+}
+
+/**
+ * psblk_get_bdev() - open block device
+ *
+ * @holder:	Exclusive holder identifier
+ * @info:	Information about bdev to fill in
+ *
+ * Return: pointer to block device on success and others on error.
+ *
+ * On success, the returned block_device has reference count of one.
+ */
+static struct block_device *psblk_get_bdev(void *holder,
+					   struct bdev_info *info)
+{
+	struct block_device *bdev = ERR_PTR(-ENODEV);
+	fmode_t mode = FMODE_READ | FMODE_WRITE;
+	sector_t nr_sects;
+
+	if (WARN_ON(!mutex_is_locked(&pstore_blk_lock)))
+		return ERR_PTR(-EINVAL);
+
+	if (pstore_zone_info)
+		return ERR_PTR(-EBUSY);
+
+	if (!blkdev[0])
+		return ERR_PTR(-ENODEV);
+
+	if (holder)
+		mode |= FMODE_EXCL;
+	bdev = blkdev_get_by_path(blkdev, mode, holder);
+	if (IS_ERR(bdev)) {
+		dev_t devt;
+
+		devt = name_to_dev_t(blkdev);
+		if (devt == 0)
+			return ERR_PTR(-ENODEV);
+		bdev = blkdev_get_by_dev(devt, mode, holder);
+		if (IS_ERR(bdev))
+			return bdev;
+	}
+
+	nr_sects = part_nr_sects_read(bdev->bd_part);
+	if (!nr_sects) {
+		pr_err("not enough space for '%s'\n", blkdev);
+		blkdev_put(bdev, mode);
+		return ERR_PTR(-ENOSPC);
+	}
+
+	if (info) {
+		info->devt = bdev->bd_dev;
+		info->nr_sects = nr_sects;
+		info->start_sect = get_start_sect(bdev);
+	}
+
+	return bdev;
+}
+
+static void psblk_put_bdev(struct block_device *bdev, void *holder)
+{
+	fmode_t mode = FMODE_READ | FMODE_WRITE;
+
+	if (!bdev)
+		return;
+
+	if (WARN_ON(!mutex_is_locked(&pstore_blk_lock)))
+		return;
+
+	if (holder)
+		mode |= FMODE_EXCL;
+	blkdev_put(bdev, mode);
+}
+
+static ssize_t psblk_generic_blk_read(char *buf, size_t bytes, loff_t pos)
+{
+	struct block_device *bdev = psblk_bdev;
+	struct file file;
+	struct kiocb kiocb;
+	struct iov_iter iter;
+	struct kvec iov = {.iov_base = buf, .iov_len = bytes};
+
+	if (!bdev)
+		return -ENODEV;
+
+	memset(&file, 0, sizeof(struct file));
+	file.f_mapping = bdev->bd_inode->i_mapping;
+	file.f_flags = O_DSYNC | __O_SYNC | O_NOATIME;
+	file.f_inode = bdev->bd_inode;
+	file_ra_state_init(&file.f_ra, file.f_mapping);
+
+	init_sync_kiocb(&kiocb, &file);
+	kiocb.ki_pos = pos;
+	iov_iter_kvec(&iter, READ, &iov, 1, bytes);
+
+	return generic_file_read_iter(&kiocb, &iter);
+}
+
+static ssize_t psblk_generic_blk_write(const char *buf, size_t bytes,
+		loff_t pos)
+{
+	struct block_device *bdev = psblk_bdev;
+	struct iov_iter iter;
+	struct kiocb kiocb;
+	struct file file;
+	ssize_t ret;
+	struct kvec iov = {.iov_base = (void *)buf, .iov_len = bytes};
+
+	if (!bdev)
+		return -ENODEV;
+
+	/* Console/Ftrace backend may handle buffer until flush dirty zones */
+	if (in_interrupt() || irqs_disabled())
+		return -EBUSY;
+
+	memset(&file, 0, sizeof(struct file));
+	file.f_mapping = bdev->bd_inode->i_mapping;
+	file.f_flags = O_DSYNC | __O_SYNC | O_NOATIME;
+	file.f_inode = bdev->bd_inode;
+
+	init_sync_kiocb(&kiocb, &file);
+	kiocb.ki_pos = pos;
+	iov_iter_kvec(&iter, WRITE, &iov, 1, bytes);
+
+	inode_lock(bdev->bd_inode);
+	ret = generic_write_checks(&kiocb, &iter);
+	if (ret > 0)
+		ret = generic_perform_write(&file, &iter, pos);
+	inode_unlock(bdev->bd_inode);
+
+	if (likely(ret > 0)) {
+		const struct file_operations f_op = {.fsync = blkdev_fsync};
+
+		file.f_op = &f_op;
+		kiocb.ki_pos += ret;
+		ret = generic_write_sync(&kiocb, ret);
+	}
+	return ret;
+}
+
+static ssize_t psblk_blk_panic_write(const char *buf, size_t size,
+		loff_t off)
+{
+	int ret;
+
+	if (!blkdev_panic_write)
+		return -EOPNOTSUPP;
+
+	/* size and off must align to SECTOR_SIZE for block device */
+	ret = blkdev_panic_write(buf, off >> SECTOR_SHIFT,
+			size >> SECTOR_SHIFT);
+	return ret ? -EIO : size;
+}
+
+static int __register_pstore_blk(struct pstore_blk_info *info)
+{
+	char bdev_name[BDEVNAME_SIZE];
+	struct block_device *bdev;
+	struct pstore_device_info dev;
+	struct bdev_info binfo;
+	void *holder = blkdev;
+	int ret = -ENODEV;
+
+	if (WARN_ON(!mutex_is_locked(&pstore_blk_lock)))
+		return -EINVAL;
+
+	/* hold bdev exclusively */
+	memset(&binfo, 0, sizeof(binfo));
+	bdev = psblk_get_bdev(holder, &binfo);
+	if (IS_ERR(bdev)) {
+		pr_err("failed to open '%s'!\n", blkdev);
+		return PTR_ERR(bdev);
+	}
+
+	/* only allow driver matching the @blkdev */
+	if (!binfo.devt || MAJOR(binfo.devt) != info->major) {
+		pr_debug("invalid major %u (expect %u)\n",
+				info->major, MAJOR(binfo.devt));
+		ret = -ENODEV;
+		goto err_put_bdev;
+	}
+
+	/* psblk_bdev must be assigned before register to pstore/blk */
+	psblk_bdev = bdev;
+	blkdev_panic_write = info->panic_write;
+
+	/* Copy back block device details. */
+	info->devt = binfo.devt;
+	info->nr_sects = binfo.nr_sects;
+	info->start_sect = binfo.start_sect;
+
+	memset(&dev, 0, sizeof(dev));
+	dev.total_size = info->nr_sects << SECTOR_SHIFT;
+	dev.flags = info->flags;
+	dev.read = psblk_generic_blk_read;
+	dev.write = psblk_generic_blk_write;
+	dev.panic_write = info->panic_write ? psblk_blk_panic_write : NULL;
+
+	ret = psblk_register_do(&dev);
+	if (ret)
+		goto err_put_bdev;
+
+	bdevname(bdev, bdev_name);
+	pr_info("attached %s%s\n", bdev_name,
+		info->panic_write ? "" : " (no dedicated panic_write!)");
+	return 0;
+
+err_put_bdev:
+	psblk_bdev = NULL;
+	blkdev_panic_write = NULL;
+	psblk_put_bdev(bdev, holder);
+	return ret;
+}
+
+/**
+ * register_pstore_blk() - register block device to pstore/blk
+ *
+ * @info: details on the desired block device interface
+ *
+ * Return:
+ * * 0		- OK
+ * * Others	- something error.
+ */
+int register_pstore_blk(struct pstore_blk_info *info)
+{
+	int ret;
+
+	mutex_lock(&pstore_blk_lock);
+	ret = __register_pstore_blk(info);
+	mutex_unlock(&pstore_blk_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(register_pstore_blk);
+
+static void __unregister_pstore_blk(unsigned int major)
+{
+	struct pstore_device_info dev = { .read = psblk_generic_blk_read };
+	void *holder = blkdev;
+
+	WARN_ON(!mutex_is_locked(&pstore_blk_lock));
+	if (psblk_bdev && MAJOR(psblk_bdev->bd_dev) == major) {
+		psblk_unregister_do(&dev);
+		psblk_put_bdev(psblk_bdev, holder);
+		blkdev_panic_write = NULL;
+		psblk_bdev = NULL;
+	}
+}
+
+/**
+ * unregister_pstore_blk() - unregister block device from pstore/blk
+ *
+ * @major: the major device number of device
+ */
+void unregister_pstore_blk(unsigned int major)
+{
+	mutex_lock(&pstore_blk_lock);
+	__unregister_pstore_blk(major);
+	mutex_unlock(&pstore_blk_lock);
+}
+EXPORT_SYMBOL_GPL(unregister_pstore_blk);
+
+static void __exit pstore_blk_exit(void)
+{
+	mutex_lock(&pstore_blk_lock);
+	if (psblk_bdev)
+		__unregister_pstore_blk(MAJOR(psblk_bdev->bd_dev));
+	mutex_unlock(&pstore_blk_lock);
+}
+module_exit(pstore_blk_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("WeiXiong Liao <liaoweixiong@xxxxxxxxxxxxxxxxx>");
+MODULE_AUTHOR("Kees Cook <keescook@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("pstore backend for block devices");
diff --git a/include/linux/pstore_blk.h b/include/linux/pstore_blk.h
new file mode 100644
index 000000000000..4501977b1336
--- /dev/null
+++ b/include/linux/pstore_blk.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __PSTORE_BLK_H_
+#define __PSTORE_BLK_H_
+
+#include <linux/types.h>
+#include <linux/pstore.h>
+#include <linux/pstore_zone.h>
+
+/**
+ * typedef pstore_blk_panic_write_op - panic write operation to block device
+ *
+ * @buf: the data to write
+ * @start_sect: start sector to block device
+ * @sects: sectors count on buf
+ *
+ * Return: On success, zero should be returned. Others mean error.
+ *
+ * Panic write to block device must be aligned to SECTOR_SIZE.
+ */
+typedef int (*pstore_blk_panic_write_op)(const char *buf, sector_t start_sect,
+		sector_t sects);
+
+/**
+ * struct pstore_blk_info - pstore/blk registration details
+ *
+ * @major:	Which major device number to support with pstore/blk
+ * @flags:	The supported PSTORE_FLAGS_* from linux/pstore.h.
+ * @panic_write:The write operation only used for the panic case.
+ *		This can be NULL, but is recommended to avoid losing
+ *		crash data if the kernel's IO path or work queues are
+ *		broken during a panic.
+ * @devt:	The dev_t that pstore/blk has attached to.
+ * @nr_sects:	Number of sectors on @devt.
+ * @start_sect:	Starting sector on @devt.
+ */
+struct pstore_blk_info {
+	unsigned int major;
+	unsigned int flags;
+	pstore_blk_panic_write_op panic_write;
+
+	/* Filled in by pstore/blk after registration. */
+	dev_t devt;
+	sector_t nr_sects;
+	sector_t start_sect;
+};
+
+int  register_pstore_blk(struct pstore_blk_info *info);
+void unregister_pstore_blk(unsigned int major);
+
+#endif
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/