Re: [PATCH 5/8] dt-bindings: mtd: Convert ingenic, jz4780-nand.txt to YAML

[Rob Herring <robh@xxxxxxxxxx>]

On Sun, Apr 26, 2020 at 08:58:53PM +0200, Paul Cercueil wrote:
> Convert the ingenic,jz4780-nand.txt doc file to ingenic,nand.yaml.
> 
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
>  .../bindings/mtd/ingenic,jz4780-nand.txt      |  92 ------------
>  .../devicetree/bindings/mtd/ingenic,nand.yaml | 133 ++++++++++++++++++
>  2 files changed, 133 insertions(+), 92 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
>  create mode 100644 Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
> deleted file mode 100644
> index c02259353327..000000000000
> --- a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
> +++ /dev/null
> @@ -1,92 +0,0 @@
> -* Ingenic JZ4780 NAND/ECC
> -
> -This file documents the device tree bindings for NAND flash devices on the
> -JZ4780. NAND devices are connected to the NEMC controller (described in
> -memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must
> -be children of the NEMC node.
> -
> -Required NAND controller device properties:
> -- compatible: Should be one of:
> -  * ingenic,jz4740-nand
> -  * ingenic,jz4725b-nand
> -  * ingenic,jz4780-nand
> -- reg: For each bank with a NAND chip attached, should specify a bank number,
> -  an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC bank).
> -
> -Optional NAND controller device properties:
> -- ecc-engine: To make use of the hardware ECC controller, this
> -  property must contain a phandle for the ECC controller node. The required
> -  properties for this node are described below. If this is not specified,
> -  software ECC will be used instead.
> -
> -Optional children nodes:
> -- Individual NAND chips are children of the NAND controller node.
> -
> -Required children node properties:
> -- reg: An integer ranging from 1 to 6 representing the CS line to use.
> -
> -Optional children node properties:
> -- nand-ecc-step-size: ECC block size in bytes.
> -- nand-ecc-strength: ECC strength (max number of correctable bits).
> -- nand-ecc-mode: String, operation mode of the NAND ecc mode. "hw" by default
> -- nand-on-flash-bbt: boolean to enable on flash bbt option, if not present false
> -- rb-gpios: GPIO specifier for the busy pin.
> -- wp-gpios: GPIO specifier for the write protect pin.
> -
> -Optional child node of NAND chip nodes:
> -- partitions: see Documentation/devicetree/bindings/mtd/partition.txt
> -
> -Example:
> -
> -nemc: nemc@13410000 {
> -	...
> -
> -	nandc: nand-controller@1 {
> -		compatible = "ingenic,jz4780-nand";
> -		reg = <1 0 0x1000000>;	/* Bank 1 */
> -
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		ecc-engine = <&bch>;
> -
> -		nand@1 {
> -			reg = <1>;
> -
> -			nand-ecc-step-size = <1024>;
> -			nand-ecc-strength = <24>;
> -			nand-ecc-mode = "hw";
> -			nand-on-flash-bbt;
> -
> -			rb-gpios = <&gpa 20 GPIO_ACTIVE_LOW>;
> -			wp-gpios = <&gpf 22 GPIO_ACTIVE_LOW>;
> -
> -			partitions {
> -				#address-cells = <2>;
> -				#size-cells = <2>;
> -				...
> -			}
> -		};
> -	};
> -};
> -
> -The ECC controller is a separate SoC component used for error correction on
> -NAND devices. The following is a description of the device properties for a
> -ECC controller.
> -
> -Required ECC properties:
> -- compatible: Should be one of:
> -  * ingenic,jz4740-ecc
> -  * ingenic,jz4725b-bch
> -  * ingenic,jz4780-bch
> -- reg: Should specify the ECC controller registers location and length.
> -- clocks: Clock for the ECC controller.
> -
> -Example:
> -
> -bch: bch@134d0000 {
> -	compatible = "ingenic,jz4780-bch";
> -	reg = <0x134d0000 0x10000>;
> -
> -	clocks = <&cgu JZ4780_CLK_BCH>;
> -};
> diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
> new file mode 100644
> index 000000000000..0e4cb1b55385
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
> @@ -0,0 +1,133 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/ingenic,nand.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ingenic SoCs NAND controller devicetree bindings
> +
> +maintainers:
> +  - Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> +
> +allOf:
> +  - $ref: ../memory-controllers/ingenic,nemc-client.yaml#

You don't need this here because the schema is already applied with the 
parent's schema.

> +  - $ref: nand-controller.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ingenic,jz4740-nand
> +      - ingenic,jz4725b-nand
> +      - ingenic,jz4780-nand
> +
> +  reg:
> +    items:
> +      - description: Bank number, offset and size of first attached NAND chip
> +      - description: Bank number, offset and size of second attached NAND chip
> +      - description: Bank number, offset and size of third attached NAND chip
> +      - description: Bank number, offset and size of fourth attached NAND chip
> +    minItems: 1
> +
> +  ecc-engine: true
> +
> +patternProperties:
> +  "^nand@[a-f0-9]$":
> +    type: object
> +    properties:
> +      rb-gpios:
> +        description: GPIO specifier for the busy pin.
> +        maxItems: 1
> +
> +      wp-gpios:
> +        description: GPIO specifier for the write-protect pin.
> +        maxItems: 1
> +
> +  "^partitions$":

This is at the wrong level. It should be under 'nand@...' node.

It is also not a pattern.

> +    type: object
> +    description:
> +      Node containing description of fixed partitions.
> +      See Documentation/devicetree/bindings/mtd/partition.txt
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/jz4780-cgu.h>
> +    nemc: memory-controller@13410000 {
> +      compatible = "ingenic,jz4780-nemc";
> +      reg = <0x13410000 0x10000>;
> +      #address-cells = <2>;
> +      #size-cells = <1>;
> +      ranges = <1 0 0x1b000000 0x1000000>,
> +         <2 0 0x1a000000 0x1000000>,
> +         <3 0 0x19000000 0x1000000>,
> +         <4 0 0x18000000 0x1000000>,
> +         <5 0 0x17000000 0x1000000>,
> +         <6 0 0x16000000 0x1000000>;
> +
> +      clocks = <&cgu JZ4780_CLK_NEMC>;
> +
> +      nand-controller@1 {
> +        compatible = "ingenic,jz4780-nand";
> +        reg = <1 0 0x1000000>;
> +
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ecc-engine = <&bch>;
> +
> +        ingenic,nemc-tAS = <10>;
> +        ingenic,nemc-tAH = <5>;
> +        ingenic,nemc-tBP = <10>;
> +        ingenic,nemc-tAW = <15>;
> +        ingenic,nemc-tSTRV = <100>;
> +
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&pins_nemc>;
> +
> +        nand@1 {
> +          reg = <1>;
> +
> +          nand-ecc-step-size = <1024>;
> +          nand-ecc-strength = <24>;
> +          nand-ecc-mode = "hw";
> +          nand-on-flash-bbt;
> +
> +          pinctrl-names = "default";
> +          pinctrl-0 = <&pins_nemc_cs1>;
> +
> +          partitions {
> +            compatible = "fixed-partitions";
> +            #address-cells = <2>;
> +            #size-cells = <2>;
> +
> +            partition@0 {
> +              label = "u-boot-spl";
> +              reg = <0x0 0x0 0x0 0x800000>;
> +            };
> +
> +            partition@800000 {
> +              label = "u-boot";
> +              reg = <0x0 0x800000 0x0 0x200000>;
> +            };
> +
> +            partition@a00000 {
> +              label = "u-boot-env";
> +              reg = <0x0 0xa00000 0x0 0x200000>;
> +            };
> +
> +            partition@c00000 {
> +              label = "boot";
> +              reg = <0x0 0xc00000 0x0 0x4000000>;
> +            };
> +
> +            partition@4c00000 {
> +              label = "system";
> +              reg = <0x0 0x4c00000 0x1 0xfb400000>;
> +            };
> +          };
> +        };
> +      };
> +    };
> -- 
> 2.26.2
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/