The current nand_read/write_page_raw() helpers are already widely used but do not fit the purpose of "constrained" controllers which cannot, for instance, separate command/address cycles with data cycles. Workaround this issue by proposing alternative helpers that can be used by these controller drivers instead. Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> --- drivers/mtd/nand/raw/nand_base.c | 77 ++++++++++++++++++++++++++++++++ include/linux/mtd/rawnand.h | 8 +++- 2 files changed, 83 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 413974df8a5e..0286f68ef552 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -2638,6 +2638,47 @@ int nand_read_page_raw(struct nand_chip *chip, uint8_t *buf, int oob_required, } EXPORT_SYMBOL(nand_read_page_raw); +/** + * nand_monolithic_read_page_raw - Monolithic page read in raw mode + * @chip: NAND chip info structure + * @buf: buffer to store read data + * @oob_required: caller requires OOB data read to chip->oob_poi + * @page: page number to read + * + * This is a raw page read, ie. without any error detection/correction. + * Monolithic means we are requesting all the relevant data (main plus + * eventually OOB) to be loaded in the NAND cache and sent over the + * bus (from the NAND chip to the NAND controller) in a single + * operation. This is an alternative to nand_read_page_raw(), which + * first reads the main data, and if the OOB data is requested too, + * then reads more data on the bus. + */ +int nand_monolithic_read_page_raw(struct nand_chip *chip, u8 *buf, + int oob_required, int page) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + unsigned int size = mtd->writesize; + u8 *read_buf = buf; + int ret; + + if (oob_required) { + size += mtd->oobsize; + + if (buf != chip->data_buf) + read_buf = nand_get_data_buf(chip); + } + + ret = nand_read_page_op(chip, page, 0, read_buf, size); + if (ret) + return ret; + + if (buf != chip->data_buf) + memcpy(buf, read_buf, mtd->writesize); + + return 0; +} +EXPORT_SYMBOL(nand_monolithic_read_page_raw); + /** * nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc * @chip: nand chip info structure @@ -3646,6 +3687,42 @@ int nand_write_page_raw(struct nand_chip *chip, const uint8_t *buf, } EXPORT_SYMBOL(nand_write_page_raw); +/** + * nand_monolithic_write_page_raw - Monolithic page write in raw mode + * @chip: NAND chip info structure + * @buf: data buffer to write + * @oob_required: must write chip->oob_poi to OOB + * @page: page number to write + * + * This is a raw page write, ie. without any error detection/correction. + * Monolithic means we are requesting all the relevant data (main plus + * eventually OOB) to be sent over the bus and effectively programmed + * into the NAND chip arrays in a single operation. This is an + * alternative to nand_write_page_raw(), which first sends the main + * data, then eventually send the OOB data by latching more data + * cycles on the NAND bus, and finally sends the program command to + * synchronyze the NAND chip cache. + */ +int nand_monolithic_write_page_raw(struct nand_chip *chip, const u8 *buf, + int oob_required, int page) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + unsigned int size = mtd->writesize; + u8 *write_buf = (u8 *)buf; + + if (oob_required) { + size += mtd->oobsize; + + if (buf != chip->data_buf) { + write_buf = nand_get_data_buf(chip); + memcpy(write_buf, buf, mtd->writesize); + } + } + + return nand_prog_page_op(chip, page, 0, write_buf, size); +} +EXPORT_SYMBOL(nand_monolithic_write_page_raw); + /** * nand_write_page_raw_syndrome - [INTERN] raw page write function * @chip: nand chip info structure diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index 70380c91731c..830e05dd1e1d 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -1328,13 +1328,17 @@ int nand_read_oob_std(struct nand_chip *chip, int page); int nand_get_set_features_notsupp(struct nand_chip *chip, int addr, u8 *subfeature_param); -/* Default read_page_raw implementation */ +/* Default read_page_raw implementations */ int nand_read_page_raw(struct nand_chip *chip, uint8_t *buf, int oob_required, int page); +int nand_monolithic_read_page_raw(struct nand_chip *chip, uint8_t *buf, + int oob_required, int page); -/* Default write_page_raw implementation */ +/* Default write_page_raw implementations */ int nand_write_page_raw(struct nand_chip *chip, const uint8_t *buf, int oob_required, int page); +int nand_monolithic_write_page_raw(struct nand_chip *chip, const uint8_t *buf, + int oob_required, int page); /* Reset and initialize a NAND device */ int nand_reset(struct nand_chip *chip, int chipnr); -- 2.20.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/