This implementation of exec_op() relies on low-level operations only. We could add support for high-level operations too through an op parser, but the gain is likely to be negligible since read/write page operations already have a fast path ({readwrite}_page[raw]() implementations). Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> --- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 72 ++++++++++++++++++++++++ 1 file changed, 72 insertions(+) diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c index e4e3ceeac38f..e70117146755 100644 --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c @@ -1599,6 +1599,77 @@ static int brcmnand_low_level_op(struct brcmnand_host *host, return brcmnand_waitfunc(chip); } +static void brcmnand_exec_instr(struct brcmnand_host *host, + const struct nand_op_instr *instr, + bool last_op) +{ + unsigned int i; + const u8 *out; + u8 *in; + + switch (instr->type) { + case NAND_OP_CMD_INSTR: + brcmnand_low_level_op(host, LL_OP_CMD, + instr->ctx.cmd.opcode, last_op); + break; + + case NAND_OP_ADDR_INSTR: + for (i = 0; i < instr->ctx.addr.naddrs; i++) + brcmnand_low_level_op(host, LL_OP_ADDR, + instr->ctx.addr.addrs[i], + last_op); + break; + + case NAND_OP_DATA_IN_INSTR: + in = instr->ctx.data.buf.in; + for (i = 0; i < instr->ctx.data.len; i++) { + brcmnand_low_level_op(host, LL_OP_RD, 0, last_op); + in[i] = brcmnand_read_reg(host->ctrl, + BRCMNAND_LL_RDATA); + } + break; + + case NAND_OP_DATA_OUT_INSTR: + out = instr->ctx.data.buf.out; + for (i = 0; i < instr->ctx.data.len; i++) + brcmnand_low_level_op(host, LL_OP_WR, out[i], last_op); + break; + + case NAND_OP_WAITRDY_INSTR: + /* + * Nothing to do here, brcmnand_low_level_op() already waits on + * FLASH_READY every time it's called. + */ + break; + + default: + break; + } +} + +static int brcmnand_exec_op(struct nand_chip *chip, + const struct nand_operation *op, + bool check_only) +{ + struct brcmnand_host *host = nand_get_controller_data(chip); + struct mtd_info *mtd = nand_to_mtd(chip); + unsigned int i; + + if (check_only) + return 0; + + if (op->deassert_wp) + brcmnand_wp(mtd, 0); + + for (i = 0; i < op->ninstrs; i++) + brcmnand_exec_instr(host, &op->instrs[i], i == op->ninstrs - 1); + + if (op->deassert_wp) + brcmnand_wp(mtd, 1); + + return 0; +} + static void brcmnand_cmdfunc(struct nand_chip *chip, unsigned command, int column, int page_addr) { @@ -2597,6 +2668,7 @@ static int brcmnand_attach_chip(struct nand_chip *chip) static const struct nand_controller_ops brcmnand_controller_ops = { .attach_chip = brcmnand_attach_chip, + .exec_op = brcmnand_exec_op, }; static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn) -- 2.25.3 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/