[PATCH v2 04/11] mtd: rawnand: Fix comments about the use of bufpoi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Clarify these comments which are not very accurate (even wrong in the
read case).

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
---
 drivers/mtd/nand/raw/nand_base.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index db2745cf4f15..4d8a4a20df63 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -3229,7 +3229,10 @@ static int nand_do_read_ops(struct nand_chip *chip, loff_t from,
 				break;
 			}
 
-			/* Transfer not aligned data */
+			/*
+			 * Copy back the data in the initial buffer when reading
+			 * partial pages or when a bounce buffer is required.
+			 */
 			if (use_bufpoi) {
 				if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
 				    !(mtd->ecc_stats.failed - ecc_failures) &&
@@ -4024,7 +4027,10 @@ static int nand_do_write_ops(struct nand_chip *chip, loff_t to,
 		else
 			use_bufpoi = 0;
 
-		/* Partial page write?, or need to use bounce buffer */
+		/*
+		 * Copy the data from the initial buffer when doing partial page
+		 * writes or when a bounce buffer is required.
+		 */
 		if (use_bufpoi) {
 			pr_debug("%s: using write bounce buffer for buf@%p\n",
 					 __func__, buf);
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux