Hi Miquel, On 4/29/20 11:13 AM, Miquel Raynal wrote: > Hi Johan, > > Johan Jonker <jbx6244@xxxxxxxxx> wrote on Wed, 29 Apr 2020 10:53:30 > +0200: > >> Hi Yifeng, >> >>> On Sun, Apr 26, 2020 at 06:02:44PM +0800, Yifeng Zhao wrote: >>>> Documentation support for Rockchip RK3xxx NAND flash controllers >>>> >>>> Signed-off-by: Yifeng Zhao <yifeng.zhao@xxxxxxxxxxxxxx> >>>> --- >>>> >>>> Changes in v5: >>>> - Fix some wrong define >>>> - Add boot-medium define >>>> - Remove some compatible define >>>> >>>> Changes in v4: >>>> - The compatible define with rkxx_nfc >>>> - Add assigned-clocks >>>> - Fix some wrong define >>>> >>>> Changes in v3: >>>> - Change the title for the dt-bindings >>>> >>>> Changes in v2: None >>>> >>>> .../mtd/rockchip,nand-controller.yaml | 124 ++++++++++++++++++ >>>> 1 file changed, 124 insertions(+) >>>> create mode 100644 Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml >>>> >>>> diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml >> >> The name of this file is based on Miquel's opinion, but the >> compatibility strings, (for which robh has given a 'reviewed by' tag) in >> version 4 don't fit with this format. > > What do you mean? Is the file name restricted somehow? I just don't > want a compatible with just "nand" in it because this word is too vague > as it defines: a bus, a spec, a chip, people are also confusing it with > the controller and sometimes with the ECC engine too. "nfc" is okay > though. > > Thanks, > Miquèl > With the review of my binding string rockchip,rk3066-hdmi robh advised to use the binding compatible string and add '.txt' to it for the file name. Is it OK for you to have a file name: rockchip,nand-controller.yaml and a little bit different compatibility string: rockchip,rk3066-nfc Kind regards, Johan ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/